An official website of the United States government
Doping organic semiconductors has become a key technology to increase the performance of organic light-emitting diodes, solar cells, or field-effect transistors (OFETs). However, doping can be used not only to optimize these devices but also to enable new design principles as well. Here, a novel type of OFET is reported—the vertical organic tunnel field-effect transistor. Based on heterogeneously doped drain and source contacts, charge carriers are injected from an n-doped source electrode into the channel by Zener tunneling and are transported toward a p-doped drain electrode. The working mechanism of these transistors is discussed with the help of a tunnel model that takes energetic broadening of transport states in organic semiconductors and roughness of organic layers into account. The proposed device principle opens new ways to optimize OFETs. It is shown that the Zener junction included between the source and drain of the vertical organic tunnel field-effect transistors suppresses short channel effects and improves the saturation of vertical OFETs.
more »
« less
Finding the Equilibrium of Organic Electrochemical Transistors
Organic Electrochemical Transistors are versatile sensors that became essential for the field of organic bioelectronics. However, despite their importance, an incomplete understanding of their working mechanism is currently precluding a targeted design of Organic Electrochemical Transistors and it is still challenging to formulate precise design rules guiding materials development in this field. Here, it is argued that current capacitive device models neglect lateral ion currents in the transistor channel and therefore fail to describe the equilibrium state of Organic Electrochemical Transistors. An improved model is presented, which shows that lateral ion currents lead to an accumulation of ions at the drain contact, which significantly alters the transistor behavior. Overall, these results show that a better understanding of the interface between the organic semiconductor and the drain electrode is needed to reach a full understanding of Organic Electrochemical Transistors.
more »
« less
- PAR ID:
- 10161130
- Date Published:
- Journal Name:
- Nature communications
- Volume:
- 11
- ISSN:
- 2041-1723
- Page Range / eLocation ID:
- 2525
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Organic electrochemical transistors are a promising technology for bioelectronic devices, with applications in neuromorphic computing and healthcare. The active component enabling an organic electrochemical transistor is the organic mixed ionic-electronic conductor whose optimization is critical for realizing high-performing devices. In this study, the influence of purity and molecular weight is examined for a p-type polythiophene and an n-type naphthalene diimide-based polymer in improving the performance and safety of organic electrochemical transistors. Our preparative GPC purification reduced the Pd content in the polymers and improved their organic electrochemical transistor mobility by ~60% and 80% for the p- and n-type materials, respectively. These findings demonstrate the paramount importance of removing residual Pd, which was concluded to be more critical than optimization of a polymer’s molecular weight, to improve organic electrochemical transistor performance and that there is readily available improvement in performance and stability of many of the reported organic mixed ionic-electronic conductors.more » « less
-
Abstract Reducing the Schottky barrier height and Fermi level de‐pinning in metal‐organic semiconductor contacts are crucial for enhancing the performance of organic transistors. The reduction of the Schottky barrier height in bottom‐contact top‐gate organic transistors is demonstrated by adding 1 nm thick atomic layer deposited Al2O3on the source and drain contacts. By using two different donor‐acceptor copolymers, bothp‐andn‐type transistors are investigated. Temperature‐dependent current–voltage measurements from non‐treated, self‐assembled monolayer treated, and Al2O3treated Au source‐drain contact field‐effect transistors with varying channel lengths are carried out. The drain current versus drain voltage near zero gate voltage, which may be described by the thermionic emission model at temperatures above 150 K, allows the estimation of the Schottky barrier height (φB). The Al2O3contact‐treated transistors show more than 40% lowerφBcompared with the non‐treated contacts in thep‐type transistor. Similarly, an isoindigo‐based transistor, withn‐type transport, shows a reduction inφBwith Al2O3treated contacts suggesting that such ultrathin oxide layers provide a universal method for reducing the barrier height.more » « less
-
Abstract A series of semiconducting small molecules with bithiophene or bis‐3,4‐ethylenedioxythiophene cores are designed and synthesized. The molecules display stable reversible oxidation in solution and can be reversibly oxidized in the solid state with aqueous electrolyte when functionalized with polar triethylene glycol side chains. Evidence of promising ion injection properties observed with cyclic voltammetry is complemented by strong electrochromism probed by spectroelectrochemistry. Blending these molecules with high molecular weight polyethylene oxide (PEO) is found to improve both ion injection and thin film stability. The molecules and their corresponding PEO blends are investigated as active layers in organic electrochemical transistors (OECTs). For the most promising molecule:polymer blend (P4E4:PEO), p‐type accumulation mode OECTs with µA drain currents, μS peak transconductances, and a µC* figure‐of‐merit value of 0.81 F V−1cm−1s−1are obtained.more » « less
-
Abstract Organic electrochemical transistors (OECTs) operate at very low voltages, transduce ions into electronic signals, and reach extremely large transconductance values, making them ideally suited for bio‐sensing applications. However, despite their promising performance, the dependence of their maximum transconductance on device geometry and applied voltages are not correctly captured by current capacitive device models. Here, current scaling laws are revised in the light of a recently developed 2D device model that adequately accounts for drift and diffusion of ions inside the polymer channel. It is shown that the maximum transconductance of the devices is found at the transition between the depletion and accumulation region of the transistors, which as well provides an explanation for the observed shift of the transconductance peak with geometric dimensions and the drain potential. Overall, the results provide a better understanding of the working mechanisms of OECTs, and facilitate design rules to optimize OECT performance further.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- The DOI is not currently available.
