The building industry has a major impact on the US economy and accounts for: $1 trillion in annual spending; 40% of the nation’s primary energy use; and 9 million jobs. Despite its massive impact, the industry has been criticized for poor productivity compared with other industries and billions of dollars in annual waste because of poor interoperability. Furthermore, the industry has been approaching a “labor cliff”: there are not enough new individuals entering the industry to offset the vacancies left by an aging, retiring workforce. To remain effective, this critical industry will need to do better with less. In order to prepare civil engineering students for careers in this industry, educators have aimed to replicate the processes associated with real-world projects through design/build educational activities like the Department of Energy’s (DOE) Solar Decathlon, Sacramento Municipal Utility District’s (SMUD) Tiny House Competition, and DOE’s Challenge Home Competition. These learning experiences help situate civil engineering concepts in an authentic learning environment. Unfortunately, not all universities have the financial resources necessary to fund this type of hands-on project. Technology has the potential to mitigate some of these inequities. Thus, the multi-faceted objective of this project is to: develop mixed reality (MR) technology aimed at sufficiently replicating physical design and construction learning environments to enable access to students at institutions without sufficient resources; and assess the impact of a MR-facilitated cyberlearning environment on promoting cognitive-, affective-, and skill-based learning that occurs during traditional (in-persona) design and construction activities. This research will explore a fundamental question: Can MR technology enable educators to simulate physical design and construction activities at low costs to enable students at all institutions to gain exposure to these types of hands-on learning environments? In order to address this question, we employ an iterative development approach according to Human Centered Design principles to support learning according to the Carnegie Foundation’s Three Apprenticeships Model (i.e., learning related to “Head”, “Hand”, and “Heart”). In order to achieve these aims, the research team uses MR technology (i.e., a Microsoft HoloLens®) to understand the extent to which this mode of education allows students to demonstrate knowledge similar to that which is gained through physical design and construction learning environments. This paper will presents highlights from the first year of this project.
more »
« less
Using Mixed Reality and the Three Apprenticeships Framework to Design Head-, Hand- and Heart-focused Learning Experiences for Civil Engineering Students
While the building industry has a major impact on the US economy, it is one that is often
criticized for poor productivity and waste resulted from interoperability. Additionally, the
impending labor shortage requires that this is industry becomes one that can do more with less in order to remain effective. As part of preparing civil engineering students for careers in this industry and to design/build infrastructure that is responsive to changing societal needs,
educators have aimed to replicate the processes associated with real-world projects through
design/build educational activities (like the Department of Energy’s (DOE) Solar Decathlon,
Sacramento Municipal Utility District’s (SMUD) Tiny House Competition, and DOE’s
Challenge Home Competition) as part of helping students situate civil engineering concepts in an authentic learning environment. Unfortunately, not all universities have the financial resources necessary to fund these types of hands-on projects. Thankfully, technology has the potential to mitigate some of these inequities. This paper presents an update on a three-year NSF-funded project that aims to: develop mixed reality (MR) technology aimed at sufficiently replicating physical design and construction learning environments to enable access to students at institutions without sufficient resources; and assess the impact of a MR-facilitated cyberlearning environment on cognitive-, affective-, and skill-based learning that occurs during traditional (in-person) design and construction activities. Human Centered Design principles and the tenets of the Carnegie Foundation’s Three Apprenticeships Model (i.e., learning related to “Head”, “Hand”, and “Heart”) inform the design, development, and assessments in this project. Highlights from the first year and future plans will be discussed.
more »
« less
- Award ID(s):
- 1735804
- NSF-PAR ID:
- 10165645
- Date Published:
- Journal Name:
- 2019 ASEE Annual Conference & Exposition
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Many university engineering programs require their students to complete a senior capstone experience to equip them with the knowledge and skills they need to succeed after graduation. Such capstone experiences typically integrate knowledge and skills learned cumulatively in the degree program, often engaging students in projects outside of the classroom. As part of an initiative to completely transform the civil engineering undergraduate program at Clemson University, a capstone-like course sequence is being incorporated into the curriculum during the sophomore year. Funded by a grant from the National Science Foundation’s Revolutionizing Engineering Departments (RED) program, this departmental transformation (referred to as the Arch initiative) is aiming to develop a culture of adaptation and a curriculum support for inclusive excellence and innovation to address the complex challenges faced by our society. Just as springers serve as the foundation stones of an arch, the new courses are called “Springers” because they serve as the foundations of the transformed curriculum. The goal of the Springer course sequence is to expose students to the “big picture” of civil engineering while developing student skills in professionalism, communication, and teamwork through real-world projects and hands-on activities. The expectation is that the Springer course sequence will allow faculty to better engage students at the beginning of their studies and help them understand how future courses contribute to the overall learning outcomes of a degree in civil engineering. The Springer course sequence is team-taught by faculty from both civil engineering and communication, and exposes students to all of the civil engineering subdisciplines. Through a project-based learning approach, Springer courses mimic capstone in that students work on a practical application of civil engineering concepts throughout the semester in a way that challenges students to incorporate tools that they will build on and use during their junior and senior years. In the 2019 spring semester, a pilot of the first of the Springer courses (Springer 1; n=11) introduced students to three civil engineering subdisciplines: construction management, hydrology, and transportation. The remaining subdisciplines will be covered in a follow-on Springer 2 pilot.. The project for Springer 1 involved designing a small parking lot for a church located adjacent to campus. Following initial instruction in civil engineering topics related to the project, students worked in teams to develop conceptual project designs. A design charrette allowed students to interact with different stakeholders to assess their conceptual designs and incorporate stakeholder input into their final designs. The purpose of this paper is to describe all aspects of the Springer 1 course, including course content, teaching methods, faculty resources, and the design and results of a Student Assessment of Learning Gains (SALG) survey to assess students’ learning outcomes. An overview of the Springer 2 course is also provided. The feedback from the SALG indicated positive attitudes towards course activities and content, and that students found interaction with project stakeholders during the design charrette especially beneficial. Challenges for full scale implementation of the Springer course sequence as a requirement in the transformed curriculum are also discussed.more » « less
-
Student reflections and using individual development plans (IDPs) for mentoring have been an integral part of an NSF S-STEM project focusing on students pursuing baccalaureate degrees in Engineering Technology (ET). The Engineering Technology Scholars – IMProving Retention and Student Success (ETS-IMPRESS) project provides financial support and offers students several high-impact curricular and co-curricular activities to increase the success of academically talented students. This interdisciplinary project brings together the Electrical Engineering Technology, and Computer Network and System Administration programs in the College of Computing and the College of Engineering’s Mechanical Engineering Technology program, with programs in the Pavlis Honors College, an inclusive and unique college designed around high-impact educational practices. An IDP is commonly used in business and industry to assist employees in meeting short- and long-term goals in their professional career. This tool has been adapted for use in the educational setting in a faculty mentoring capacity. The ET program advisors assign the freshman or transfer S-STEM student scholars with faculty mentors to match their area of research interest. The faculty mentors meet with the students a minimum of three to four times a year to review their IDP, make suggestions, and provide input for reaching their goals. The goals of the IDP process are to develop a deeper more meaningful relationship between the advisor and student, reflect and develop a strategy for the scholar’s educational and career success, and manage expectations and identify opportunities. In the initial meeting there are several prompts for the student to write about their goals, strengths, weaknesses and perceived challenges. In subsequent meetings the advisor and student revisit the IDP to discuss progress towards those goals. This study will describe some outcomes of the IDP process providing specific examples from each of the ET programs. Although it is difficult to measure the effect of these relationships, it is one of the high impact practices that have been noted as increasing student engagement and retention. The consequences of COVID-19 introducing a virtual environment to the IDP process will also be examined from the viewpoint of both student and advisor. An advantage of the IDP meetings for students is that advisors may provide personal business connections for internship opportunities and/or research projects that otherwise would not be discussed in a typical office hour or classroom session. One of the innovations of the ETS-IMPRESS program was requiring participation in the Honors Pathway Program, which generally emphasizes intrinsic motivation (and does not use GPA in admissions or awarding of credentials). The honors program consists of three seminar classes and four experiential components; for all of these, students write reflections designed to promote their development of self-authorship. Preliminary survey results show no difference between ETS and other honors students in the areas of student motivation, intention to persist, and professional skill development. ETS students see a closer link between their current major and their future career than non-ETS honors students. A comparative analysis of reflections will investigate students’ perceptions of the program’s effect.more » « less
-
As part of a National Science Foundation-funded initiative to completely transform the civil engineering undergraduate program at Clemson University, a capstone-like course sequence is being incorporated into the curriculum during the sophomore year. Clemson’s NSF Revolutionizing Engineering Departments (RED) program is called the Arch Initiative. Just as springers serve as the foundation stones of an arch, the new courses are called “Springers” because they serve as the foundations of the transformed curriculum. Through a project-based learning approach, Springer courses mimic the senior capstone experience by immersing students in a semester-long practical application of civil engineering, exposing them to concepts and tools in a way that challenges students to develop new knowledge that they will build on and use during their junior and senior years. In the 2019 spring semester, a pilot of the first Springer course introduced students to three civil engineering sub-disciplines: construction management, water resources, and transportation. The remaining sub-disciplines are covered in a follow-on Springer 2 pilot. The purpose of this paper is to describe all aspects of the Springer 1 course, including course content, teaching methods, faculty resources, and the design and results of a Student Assessment of Learning Gains (SALG) survey to assess students’ learning outcomes. The feedback from the SALG indicated positive attitudes towards course activities and content. Challenges for full-scale implementation of the Springer course sequence as a requirement in the transformed curriculum are also discussed.more » « less
-
This research work-in-progress paper investigated the application of emerging mixed reality (MR) technology in construction and engineering education. The construction industry is facing a severe shortage of skilled workforce. As the baby boomers are retiring, the younger generation, especially college students, are often criticized for their lack of professional experience and career-specific competency. To close the skills gap and accelerate the transition of college students to competent workforce, this paper proposed a new genre of learning and professional training using MR. The main promise of the MR technology resides in its ability to augment virtual contents on top of the physical reality to facilitate tacit knowledge learning, and simulate learning activities that traditionally can only be obtained from actual professional experience. An undergraduate wood framing lab was designed as a case study to explore how students might perform in this new learning and training environment. Specifically, the case study investigated if MR would facilitate student design comprehension and transfer such understanding into the knowledge and skills needed to build the wood structure. A randomly selected student control group was given traditional paper-based construction drawings to perform the same tasks with other student groups with various visualization technology assistance. Project performance and behavior of student groups were compared to determine if there was a significant difference between the control group and the experiment groups. A pair of pre- and post-survey on MR-intervened learning experience was also conducted to explore student perceptions towards this new genre of learning and training. The research design proposed in this work-in-progress study and its preliminary results could be a good reference and foundation to future research in this arena.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.18260/1-2--32462
