More Like this

1. Engaging Civil Engineering Students by Exposing them to a “Capstone-like” Experience in their Sophomore Year: A Case Study

   Sarasua, Wayne ; Kaye, Nigel B. ; Ogle, Jennifer H. ; Benaissa, Mehdi N. ; Benson, Lisa ; Putman, Bradley J. ; and Pfirman, Aubrie L. ( June 2020 , 2020 ASEE Annual Conference & Exposition)

   As part of a National Science Foundation-funded initiative to completely transform the civil engineering undergraduate program at Clemson University, a capstone-like course sequence is being incorporated into the curriculum during the sophomore year. Clemson’s NSF Revolutionizing Engineering Departments (RED) program is called the Arch Initiative. Just as springers serve as the foundation stones of an arch, the new courses are called “Springers” because they serve as the foundations of the transformed curriculum. Through a project-based learning approach, Springer courses mimic the senior capstone experience by immersing students in a semester-long practical application of civil engineering, exposing them to concepts and tools in a way that challenges students to develop new knowledge that they will build on and use during their junior and senior years. In the 2019 spring semester, a pilot of the first Springer course introduced students to three civil engineering sub-disciplines: construction management, water resources, and transportation. The remaining sub-disciplines are covered in a follow-on Springer 2 pilot. The purpose of this paper is to describe all aspects of the Springer 1 course, including course content, teaching methods, faculty resources, and the design and results of a Student Assessment of Learning Gains (SALG) survey to assess students’ learning outcomes. The feedback from the SALG indicated positive attitudes towards course activities and content. Challenges for full-scale implementation of the Springer course sequence as a requirement in the transformed curriculum are also discussed. 

   more » « less
2. Adding a “Design Thread” to Electrical and Computer Engineering Degree Programs: Motivation, Implementation, and Evaluation

   Cheville, R. A. ; Thompson, M. S. ; Thomas, S. ( July 2021 , ASEE annual conference exposition)

   null (Ed.)

   This article details the multi-year process of adding a “design thread” to our department’s electrical and computer engineering curricula. We use the conception of a “thread” to mean a sequence of courses that extend unbroken across each year of the undergraduate curriculum. The design thread includes a project-based introduction to the discipline course in the first year, a course in the second year focusing on measurement and fabrication, a course in the third year to frame technical problems in societal challenges, and culminates with our two-semester, client-driven fourth-year capstone design sequence. The impetus to create a design thread arose from preparation for an ABET visit where we identified a need for more “systems thinking” within the curriculum, particularly system decomposition and modularity; difficulty in having students make engineering evaluations of systems based on data; and students’ difficulty transferring skills in testing, measurement, and evaluation from in-class lab scenarios to more independent work on projects. We also noted that when working in teams, students operated more collectively than collaboratively. In other words, rather than using task division and specialization to carry out larger projects, students addressed all problems collectively as a group. This paper discusses the process through which faculty developed a shared conception of design to enable coherent changes to courses in the four year sequence and the political and practical compromises needed to create the design thread. To develop a shared conception of design faculty explored several frameworks that emphasized multiple aspects of design. Course changes based on elements of these frameworks included introducing design representations such as block diagrams to promote systems thinking in the first year and consistently utilizing representations throughout the remainder of the four year sequence. Emphasizing modularity through representations also enabled introducing aspects of collaborative teamwork. While students are introduced broadly to elements of the design framework in their first year, later years emphasize particular aspects. The second year course focuses on skills in fabrication and performance measurement while the third year course emphasizes problem context and users, in an iterative design process. The client-based senior capstone experience integrates all seven aspects of our framework. On the political and organizational side implementing the design thread required major content changes in the department’s introductory course, and freeing up six credit-hour equivalents, one and a half courses, in the curriculum. The paper discusses how the ABET process enabled these discussions to occur, other curricular changes needed to enable the design thread to be implemented, and methods which enabled the two degree programs to align faculty motivation, distribute the workload, and understand the impact the curricular changes had on student learning. 

   more » « less
3. A Longitudinal Study of the Integration of Writing Support in a Multi-Semester Senior Capstone Course

   Pflueger, Ruth C. ; Meckley, Jonathan A. ( March 2022 , 2022 ASEE North Central Section Annual Conference)

   ABET lists the ability to communicate in writing to both technical and non-technical audiences as a required outcome for baccalaureate engineering students [1]. From emails and memos to formal reports, the ability to communicate is vital to the engineering profession. This Work in Progress paper describes research being done as part of an NSF-funded project, Writing Assignment Tutor Training in STEM (WATTS). The method is designed to improve feedback writing tutors without technical backgrounds give to engineering students on technical reports. Students in engineering programs have few opportunities to develop their writing skills. Usually, composition courses are part of the general education curriculum. Students often see these courses as unrelated to their majors and careers [2]. Ideally, writing support should be integrated throughout a program. Since WATTs capitalizes on existing resources and requires only a modest amount of faculty time, it could enable engineering programs to provide additional writing support to students in multiple courses and provide a bridge for them to see the connection between writing concepts learned in composition courses and their technical reports. WATTS was developed in a junior-level circuit analysis course, where students were completing the same lab and writing individual reports. This paper focuses on a senior capstone course that utilizes concepts taught in previous courses to prepare students to complete an independent team research or design project. Projects are unique, usually based on the needs of an industrial sponsor, and are completed over three consecutive semesters. Each semester, teams write a report based on their activities during that semester, with a comprehensive report in the final semester. The multi-semester nature of the senior design project provides an opportunity for the researchers to chart longitudinal changes from the first to the students’ third semester interactions with the writing tutors, assessing the value of an integrated approach. The program’s impact on students’ attitudes toward revision and the value of tutoring, as well as the impact on tutors, are part of the assessment plan. The program hopes to change the students’ focus from simply presenting their results to communicating them. The goals of the project are to demonstrate to students that revision is essential to the writing process and that feedback can improve their written communication abilities. The expectation is that after graduation they will continue to seek critical feedback as part of their career growth. Surveys given to both students and tutors revealed that the sessions were taken seriously by the students and that meaningful collaboration was achieved between them. An evaluation of the writing in pre-tutored to final submitted report shows statistically significant improvement. Preliminary and current results will be included within the paper. [1] Criteria for Accrediting Engineering Technology Programs, ABET, Baltimore, MD., 2020, p.5, ETAC Criteria (abet.org) [2] Bergmann, L. S. and Zepernick, J., “Disciplinarity and Transfer: Students’ Perceptions of Learning to Write,” Writing Program Administration, 31, Fall/Winter 2007. 

   more » « less
4. Work in Progress: Formation of an engineering identity in first-year students through an intervention centered on senior design projects

   Richards, Abigail M ; Anderson, Ryan ; Myers, Carrie B ( July 2020 , ASEE annual conference exposition)

   Abstract This “work in progress” paper describes a multiyear project to study the development of engineering identity in a chemical and biological engineering program at Montana State University. The project focuses on how engineering identity may be impacted by a series of interventions utilizing subject material in a senior-level capstone design course and has the senior capstone design students serve as peer-mentors to first- and second-year students. A more rapid development of an engineering identity by first- and second-year students is suspected to increase retention and persistence in this engineering program. Through a series of timed interventions scheduled to take place in the first and second year, which includes cohorts that will serve as negative controls (no intervention), we hope to ascertain the following: (1) the extent to which, relative to a control group, exposure to a peer mentor increases a students’ engineering identity development over time compared to those who do not receive peer mentoring and (2) if the quantity and/or timing of the peer interactions impact engineering identity development. While the project includes interventions for both first- and second-year students, this work in progress paper focuses on the experiences of first year freshman as a result of the interventions and their development of an engineering identity over the course of the semester. Early in the fall semester, freshman chemical engineering students enrolled in an introductory chemical engineering course and senior students in a capstone design course were administered a survey which contained a validated instrument to assess engineering identity. The first-year course has 107 students and the senior-level course has 92 students and approximately 50% of the students in both cohorts completed the survey. Mid-semester, after the first-year students were introduced to the concepts of process flow diagrams and material balances in their course, senior design student teams gave presentations about their capstone design projects in the introductory course. The presentations focused on the project goals, design process and highlighted the process flow diagrams. After the presentations, freshman and senior students attended small group dinners as part of a homework assignment wherein the senior students were directed to communicate information about their design projects as well as share their experiences in the chemical engineering program. Dinners occurred overall several days, with up to ten freshman and five seniors attending each event. Freshman students were encouraged to use this time to discover more about the major, inquire about future course work, and learn about ways to enrich their educational experience through extracurricular and co-curricular activities. Several weeks after the dinner experience, senior students returned to give additional presentations to the freshman students to focus on the environmental and societal impacts of their design projects. We report baseline engineering identity in this paper. 

   more » « less
5. From Workshops to Classrooms: Faculty Experiences with Implementing Inclusive Design Principles

   https://doi.org/10.1145/3626252.3630861  

   Patel, Pankati ; Moz-Ruiz, Dahana ; Garcia, Rosalinda ; Chatterjee, Amreeta ; Morreale, Patricia ; Burnett, Margaret ( March 2024 , Proceedings of the 55th ACM Technical Symposium on Computer Science Education (SIGCSE 2024))

   Computer science (CS) and information technology (IT) curricula are grounded in theoretical and technical skills. Topics like equity and inclusive design are rarely found in mainstream student studies. This results in graduates with outdated practices and limitations in software development. A research project was conducted to educate the faculty to integrate inclusive software design into the CS undergraduate curriculum. The objective is to produce graduates with the ability to develop inclusive software. This experience report presents the results of teaching inclusive design throughout the four-year CS and IT curriculum, focusing on the impact on faculty. This easy-to-adopt, high-impact approach improved student retention and classroom climate, broadening participation. Research questions address faculty understanding of inclusive software design, the approach's feasibility, improvement in students’ ability to design equitable software, and assessment of the inclusiveness culture for students in computing programs. Faculty attended a summer workshop to learn about inclusive design and update their teaching materials to include the GenderMag method. Beginning in CS0 and CS1 and continuing through Senior Capstone, faculty used updated course assignments to include inclusive design in 10 courses for 44 sections taught. Faculty outcomes are positive, with the planning to include inclusive design and working with other department faculty most engaging. Faculty were impressed by student ownership and adoption of inclusive design methods, particularly in the culminating capstone senior project. 

   more » « less