An official website of the United States government
A series of centrifuge tests of a sloping ground were conducted at Rensselaer Polytechnic Institute (RPI). These tests were used to monitor and assess the soil response, in terms of generated accelerations, excess pore water pressure (EPWP) and associated lateral spreading, as a function of variations in the dynamic input motion and soil relative density. This series of tests are part of the Liquefaction Experiments and Analysis Projects (LEAP-2017), an international effort to assess the repeatability and reproducibility of centrifuge experimental results, and verify and validate soil liquefaction numerical tools using the experimental data.
more »
« less
LEAP-2017: Comparison of the Type-B Numerical Simulations with Centrifuge Test Results
This paper presents comparisons of 11 sets of Type-B numerical simulations with the results of a selected set of centrifuge tests conducted in the LEAP-2017 project. Time histories of accelerations, excess pore water pressures, and lateral displacement of the ground surface are compared to the results of nine centrifuge tests. A number of numerical simulations showed trends similar to those observed in the experiments. While achieving a close match to all measured responses (accelerations, pore pressures, and displacements) is quite challenging, the numerical simulations show promising capabilities that can be further improved with the availability of additional high-quality experimental results.
more »
« less
- PAR ID:
- 10166196
- Date Published:
- Journal Name:
- Proceedings of LEAP-UCD-2017 workshop
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Seismic design of water retaining structures relies heavily on the response of the retained water to shaking. The water dynamic response has been evaluated by means of analytical, numerical, and experimental approaches. In practice, it is common to use simplified code‐based methods to evaluate the added demands imposed by water sloshing. Yet, such methods were developed with an inherent set of assumptions that might limit their application. Alternatively, numerical modeling methods offer a more accurate way of quantifying the water response and have been commonly validated using 1 g shake table experiments. In this study, a unique series of five centrifuge tests was conducted with the goal of investigating the hydrodynamic behavior of water by varying its height and length. Moreover, sine wave and earthquake motions were applied to examine the water response at different types and levels of excitation. Arbitrary Lagrangian‐Eulerian finite element models were then developed to reproduce 1 g shake table experiments available in the literature in addition to the centrifuge tests conducted in this study. The results of the numerical simulations as well as the simplified and analytical methods were compared to the experimental measurements, in terms of free surface elevation and hydrodynamic pressures, to evaluate their applicability and limitations. The comparison showed that the numerical models were able to reasonably capture the water response of all configurations both under earthquake and sine wave motions. The analytical solutions performed well except for cases with resonance under harmonic motions. As for the simplified methods, they provided acceptable results for the peak responses under earthquake motions. However, under sine wave motions, where convective sloshing is significant, they underpredict the response. Also, beyond peak ground accelerations of 0.5 g., a mild nonlinear increase in peak dynamic pressures was measured which deviates from assumed linear response in the simplified methods. The study confirmed the reliability of numerical models in capturing water dynamic responses, demonstrating their broad applicability for use in complex problems of fluid‐structure‐soil interaction.more » « less
-
The results of a series of nonlinear finite element simulations are presented to demonstrate the effects of base motion variability on liquefaction-induced lateral spreading of mildly sloping grounds. The analyses are part of the 2017 Liquefaction Experiments and Analysis Project (LEAP-2017). A key objective of LEAP is to generate a database of reliable centrifuge experiments to facilitate the validation of the current state-of-the-art analysis tools for the modeling of soil liquefaction. In the context of centrifuge experiments, the sources of uncertainty in the base motion are the magnitude and frequency content differences between the target and the achieved base motions. While centrifuge experiments are conducted with diligence, achieving the target base motion is restricted by the machine limitation and the presence of noise. A series of Monte Carlo (MC) simulations are performed to investigate the effects of the base motion variability. Base motion statistics are obtained as a function of frequency capturing the variations observed in the spectral accelerations of the achieved base motions. The simulations presented in this paper consider the cases of homogeneous soil as well as spatially variable soil conditions. The results of the MC simulations are used to shed light on how small deviations of the achieved base motion from the target motion might influence the response of liquefiable ground. Sensitivity of the computed soil responses to these deviations are assessed by considering the variations of excess pore pressures, lateral spreading, and ground surface settlements.more » « less
-
Microbially induced desaturation and precipitation (MIDP) via denitrification has the potential to reduce earthquake-induced liquefaction potential by two mechanisms: calcium carbonate precipitation to mechanically strengthen soil and biogenic gas production to desaturate and dampen pore pressure changes in soil. Lab-scale tests have demonstrated effective desaturation and improved mechanical strength by MIDP. However, in laboratory tests, gas pockets and lenses form causing upheaval as a result of low overburden pressures. The characteristics of biogenic gas formation, distribution, and retention need to be evaluated to gain comprehensive understanding of the effectiveness of this treatment at depth before and after an earthquake event. MIDP treatment during centrifuge loading conditions is being performed to simulate field stress conditions, prior to complete process scale-up for field application. A simplified numerical model was developed to evaluate the scaling effects on biogenic gas generation between the centrifuge model and prototype scale. The results indicate that diffusion of soluble N2 is negligible at both the model and prototype scales for the simulated reaction rate. However, the simplified model did not consider other pore-scale influences and mixing from liquid-gas transfer and transport. Future modeling work will need to add these features.more » « less
-
This paper presents the development, implementation and experimental evaluation of a new crack detection mechanism for centrifuge modelling. The proposed mechanism is a brittle conductor bonded to cement providing a binary indication of if, and when, a sensor is cracked. The results of a pair of large centrifuge tests were used to evaluate the effectiveness of the proposed crack detection mechanism. Each test model included a soil profile consisting of a 23 m thick layer of lightly over-consolidated clay, underlain and overlain by thin layers of dense sand. The centrifuge models had two separate zones, a zone without reinforcement and a zone with an ‘embedded’ soil–cement grid, which had a unit cell area replacement ratio A r = 24%. Models were subjected to 13 different shaking events with peak base accelerations ranging from 0·01 to 0·55g. The performance of the proposed crack detection mechanism was examined using (i) post-test crack mapping in the soil–cement grids, (ii) results of the crack detection system and (iii) time series of accelerations, displacements and footing rotation. The results from the centrifuge test showed that the proposed crack detection method accurately captured if, and when, cracking occurred in the soil–cement grid at the locations of the sensors.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1007/978-3-030-22818-7_10
