A PEM fuel cell with a hydrophobically treated cathode catalyst layer (CL) demonstrates ∼220% peak power increase with humidified air at 70 °C. To understand the reasons of the increase, a mathematical model was developed focusing on the oxygen-water two-phase transport phenomena in the CL. It suggests the treatment affects the CL in two ways. First, the interface of the ionomer layer exposed to the gas pores becomes more hydrophobic, facilitating less liquid water coverage and faster water drainage from the CL and resulting in better performance at high current densities. Second, it also affects the hydration level in the ionomer phase resulting in higher oxygen concentration in the ionomer phase on and in the catalyst agglomerates, leading to higher performance over the whole polarization curve. The properties having significant influence on the model fitting the experimental data are the capillary pressure property of the CL, the hydrophobic ionomer ratio in the catalyst agglomerate, and the oxygen solubility/diffusivity in the Nafion® phases. With this experimentally verified model, additional case studies combining the hydrophobic gas diffusion material with the hydrophobic CL demonstrate that the membrane’s self-humidification (zero-net-water flux) and peak power enhancement (∼15%) can be reached simultaneously, providing direction for the future materials development.
- Award ID(s):
- 1803058
- NSF-PAR ID:
- 10167117
- Date Published:
- Journal Name:
- Journal of Applied Electrochemistry
- ISSN:
- 0021-891X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
more » « less
Abstract A PEM fuel cell with the Nafion ionomer phase of the cathode catalyst layer (CL) that was exposed to hot dry gas during the hot‐pressing process showed improved performance over the whole current density range and ~ 220% peak power increase with humidified air at 80°C. This enhanced performance is attributed to the modified structure of the perfluorosulfonic acid (PFSA) ionomer layer in the CL during the MEA's hot‐pressing process. The dry gas exposure above the glass transition temperature (
T g) results in the aggregation of the ionic groups to retain the residue water molecules. This process separates the ionomer into ionic‐group‐rich domains and ionic‐group‐sparse domains. The ionic‐group‐sparse domains create hydrophobic interface and reactant transport channels with lower water content and thus higher oxygen solubility in the ionomer. Accordingly, the water‐unsaturated ionomer and its surface hydrophobicity enhance the kinetic‐controlled and concentration‐polarized regions of the fuel cell polarization curve, respectively. The surface hydrophobicity of the ionomer layer is analyzed by the contact angle measurement and XPS. The durability of the hydrophobic effect belowT gis demonstrated by boiling the treated material. Re‐treating the hydrophobic sample with humidified gas exposure aboveT geventually exhibits hydrophilic features, further proving the manipulability of the ionic group distribution. -
The urgent need to address the high-cost issue of proton-exchange membrane fuel cell (PEMFC) technologies, particularly for transportation applications, drives the development of simultaneously highly active and durable platinum group metal-free (PGM-free) catalysts and electrodes. The past decade has witnessed remarkable progress in exploring PGM-free cathode catalysts for the oxygen reduction reaction (ORR) to overcome sluggish kinetics and catalyst instability in acids. Among others, scientists have identified the newly emerging atomically dispersed transition metal (M: Fe, Co, or/and Mn) and nitrogen co-doped carbon (M–N–C) catalysts as the most promising alternative to PGM catalysts. Here, we provide a comprehensive review of significant breakthroughs, remaining challenges, and perspectives regarding the M–N–C catalysts in terms of catalyst activity, stability, and membrane electrode assembly (MEA) performance. A variety of novel synthetic strategies demonstrated effectiveness in improving intrinsic activity, increasing active site density, and attaining optimal porous structures of catalysts. Rationally designing and engineering the coordination environment of single metal MN x sites and their local structures are crucial for enhancing intrinsic activity. Increasing the site density relies on the innovative strategies of restricting the migration and agglomeration of single metal sites into metallic clusters. Relevant understandings provide the correlations among the nature of active sites, nanostructures, and catalytic activity of M–N–C catalysts at the atomic scale through a combination of experimentation and theory. Current knowledge of the transferring catalytic properties of M–N–C catalysts to MEA performance is limited. Rationally designing morphologic features of M–N–C catalysts play a vital role in boosting electrode performance through exposing more accessible active sites, realizing uniform ionomer distribution, and facilitating mass/proton transports. We outline future research directions concerning the comprehensive evaluation of M–N–C catalysts in MEAs. The most considerable challenge of current M–N–C catalysts is the unsatisfied stability and rapid performance degradation in MEAs. Therefore, we further discuss practical methods and strategies to mitigate catalyst and electrode degradation, which is fundamentally essential to make M–N–C catalysts viable in PEMFC technologies.more » « less
-
more » « less
The impact of polyvinylidene fluoride (PVDF) as a binder component on the durability of Pt/C cathodes in a proton exchange membrane fuel cell membrane-electrode-assembly (MEA) during a carbon corrosion accelerated stress test (AST) was examined using electrochemical fuel cell data and visual inspection/analysis of the cathode morphology via electron-microscopy. Electrospun nanofiber cathode mat MEAs with a Nafion®/PVDF or Nafion/poly(acrylic acid) (PAA) binder or a slurry cathode MEA with neat Nafion or a Nafion/PVDF binder were investigated. The presence of PVDF had profound effects on the structure and chemical/electrochemical properties of a fuel cell cathode; its hydrophobic property slowed the rate of carbon loss and its robust mechanical properties added strength to the binder. Thus, the extent of carbon loss during an AST was inversely proportional to the PVDF content of the binder and there was no observable cathode thinning nor any change in cathode porosity after the AST, when the cathode binder contained at least 50 wt% PVDF. In terms of long-term durability, these beneficial structural effects outweighed the lower Nafion/PVDF binder conductivity and the associated lower initial power output of a Nafion/PVDF cathode MEA. For hydrophilic slurry and nanofiber cathodes with neat Nafion or Nafion/PAA fibers, low power after the carbon corrosion AST was due to greater carbon losses, cathode thinning and the collapse of cathode pores, which dominated MEA performance even though the initial cathode ECSA and mass activity were high for these two MEAs.
-
more » « less
Abstract In this study, pentablock terpolymers with methylpyrrolidinium cations were characterized and investigated as anion exchange membranes and ionomers for solid‐state alkaline fuel cells. The pentablock terpolymer (with methylpyrrolidinium cations) membranes exhibited higher fuel cell power density and durability than commercial FuMA‐Tech (with quaternary ammonium cations) membranes at 30 °C, 100% relative humidity (RH). Optimization of the catalyst ink composition (i.e., solids and solvent ratio) and fuel cell performance of membrane electrode assemblies (MEAs) with pentablock terpolymers as both the membrane and ionomer were also investigated. Optimization of the fuel cell operating conditions corroborates with the
in situ electrochemical impedance spectroscopy results. The pentablock terpolymer MEA exhibited a maximum power density of 83.3 mW cm−2and voltage decay rate of 0.7 mV h−1after 100 h of operation under 40 °C, 100% RH. These results show promise for pentablock terptolymers with methylpyrrolidinium cations as a commercially attractive low‐cost alternative anion exchange membrane and ionomer for solid‐state alkaline fuel cells.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1007/s10800-020-01453-w
