skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Nonsequential double ionization of Ar in near-single-cycle laser pulses
Using the improved quantitative rescattering (QRS) model, we simulate the correlated two-electron momentum distributions (CMD) for nonsequential double ionization (NSDI) of Ar by near-single-cycle laser pulses with a wavelength of 750 nm at an intensity of 2.8 × 1014W/cm2. With the accurate cross sections obtained from fully quantum mechanical calculations for both electron impact excitation and electron impact ionization of Ar+, we unambiguously identify the contributions from recollision direct ionization (RDI) and recollision excitation with subsequent ionization (RESI). Our analysis reveals that RESI constitutes the main contribution to NSDI of Ar under the conditions considered here. The simulated results are directly compared with experimental measurements [Bergueset al.,Nat. Commun.3,813(2012)10.1038/ncomms1807] in which each NSDI event is tagged with the carrier-envelope phase (CEP). It is found that the overall pattern of both the CEP-resolved and the CEP-averaged CMDs measured in experiment are well reproduced by the QRS model, and the cross-shaped structure in the CEP-averaged CMD is attributed to the strong forward scattering of the recolliding electron as well as the depletion effect in tunneling ionization of the electron from an excited state of the parent ion.  more » « less
Award ID(s):
1834740 1803844
PAR ID:
10170945
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
Optical Society of America
Date Published:
Journal Name:
Optics Express
Volume:
28
Issue:
15
ISSN:
1094-4087; OPEXFF
Format(s):
Medium: X Size: Article No. 22231
Size(s):
Article No. 22231
Sponsoring Org:
National Science Foundation
More Like this
  1. Using the quantitative rescattering model, we simulate the correlated two-electron momentum distributions for nonsequential double ionization of helium by 800 nm laser pulses at intensities in the range of (2 − 15) × 1014W/cm2. The experimentally observed V-shaped structure at high intensities [Phys. Rev. Lett.99,263003(2007)10.1103/PhysRevLett.99.263003] is attributed to the strong forward scattering in laser-induced recollision excitation and the asymmetric momentum distribution of electrons that are tunneling-ionized from the excited states. The final-state electron repulsion also plays an important role in forming the V-shaped structure. 
    more » « less
  2. In Parts I [Appl. Opt.58,6067(2019)APOPAI0003-693510.1364/AO.58.006067] and II [Appl. Opt.61,10049(2022)APOPAI0003-693510.1364/AO.474920], we used a coupled optoelectronic model to optimize a thin-film CIGS solar cell with a graded-bandgap photon-absorbing layer, periodically corrugated backreflector, and multilayered antireflection coatings. Bandgap grading of the CIGS photon-absorbing layer was continuous and either linear or nonlinear, in the thickness direction. Periodic corrugation and multilayered antireflection coatings were found to engender slight improvements in the efficiency. In contrast, bandgap grading of the CIGS photon-absorbing layer leads to significant enhancement of efficiency, especially when the grading is continuous and nonlinear. However, practical implementation of continuous nonlinear grading is challenging compared to piecewise-homogeneous grading. Hence, for this study, we investigated piecewise-homogeneous approximations of the optimal linear and nonlinear grading profiles, and found that an equivalent efficiency is achieved using piecewise-homogeneous grading. An efficiency of 30.15% is predicted with a three-layered piecewise-homogeneous CIGS photon-absorbing layer. The results will help experimentalists to implement optimal designs for highly efficient CIGS thin-film solar cells. 
    more » « less
  3. A spatiotemporal optical vortex (STOV) is an intrinsic optical orbital angular momentum (OAM) structure in which the OAM vector is orthogonal to the propagation direction [Optica6,1547(2019)OPTIC82334-253610.1364/OPTICA.6.001547] and the optical phase circulates in space-time. Here, we experimentally and theoretically demonstrate the generation of the second harmonic of a STOV-carrying pulse along with the conservation of STOV-based OAM. Our experiments verify that photons can have intrinsic orbital angular momentum perpendicular to their propagation direction. 
    more » « less
  4. First-fit (FF) is a well-known and widely deployed algorithm for spectrum assignment (SA), but until our recent study [J. Opt. Commun. Netw.14,165(2022)JOCNBB1943-062010.1364/JOCN.445492], investigations of the algorithm had been experimental in nature and no formal properties of the algorithm with respect to SA were known. In this work, we make two contributions. First, we show that FF is auniversalalgorithm for the SA problem in the sense that, for any variant, 1) it can be used to construct solutions equivalent to, or better than, any solution obtained by any other algorithm, and 2) it can construct an optimal solution. This universality property applies to both the min-max and min-frag objectives and to variants of the SA problem with or without guard band constraints. Consequently, the spectrum symmetry-free model of our recent study [J. Opt. Commun. Netw.14,165(2022)JOCNBB1943-062010.1364/JOCN.445492] extends to all known SA variants, which therefore reduce to permutation problems. Second, we extend the spectrum symmetry-free model to the routing and spectrum assignment (RSA) problem in general topologies. This model allows for the design of more efficient algorithms as it eliminates from consideration an exponential number of equivalent symmetric solutions. By sidestepping symmetry, the RSA solution space is naturally and optimally decomposed into a routing space and a connection permutation space. Building upon this property, we introduce a two-parameter, symmetry-freeuniversalalgorithm that can be used to tackle any RSA variant in a uniform manner. The algorithm is amenable to multi-threaded execution to speed up the search process, and the value of the parameters can be adjusted to strike a balance between running time and solution quality. Our evaluation provides insight into the relative benefits of path diversity (which determines the size of the routing space) and connection diversity (which determines the size of the permutation space). 
    more » « less
  5. A recently reported vision ray metrology technique [Opt. Express29,43480(2021)OPEXFF1094-408710.1364/OE.443550] measures geometric wavefronts with high precision. This paper introduces a method to convert these wavefront data into height information, focusing on the impact of back surface flatness and telecentricity errors on measurement accuracy. Systematic errors from these factors significantly affect height measurements. Using ray trace simulations, we estimate reconstruction errors with various plano-concave and plano-convex elements. We also developed a calibration technique to mitigate telecentricity errors, achieving submicron accuracy in surface reconstruction. This study provides practical insights into vision ray metrology systems, highlighting validity limits, emphasizing the importance of calibration for larger samples, and establishing system alignment tolerances. The reported technique for the conversion of geometric wavefronts to surface topography employs a direct non-iterative ray-tracing-free method. It is ideally suited for reference-free metrology with application to freeform optics manufacturing. 
    more » « less