More Like this

1. Types of Models Identified by First-Year Engineering Students

   Rodgers, K; Thompson, A; Verleger, M; Marbouti, F; Shah, N; Thaker, P (July 2021, 2021 ASEE Annual Conference)

   null (Ed.)

   This is a Complete Research paper. Understanding models is important for engineering students, but not often taught explicitly in first-year courses. Although there are many types of models in engineering, studies have shown that engineering students most commonly identify prototyping or physical models when asked about modeling. In order to evaluate students’ understanding of different types of models used in engineering and the effectiveness of interventions designed to teach modeling, a survey was developed. This paper describes development of a framework to categorize the types of engineering models that first-year engineering students discuss based on both previous literature and students’ responses to survey questions about models. In Fall 2019, the survey was administered to first-year engineering students to investigate their awareness of types of models and understanding of how to apply different types of models in solving engineering problems. Students’ responses to three questions from the survey were analyzed in this study: 1. What is a model in science, technology, engineering, and mathematics (STEM) fields?, 2. List different types of models that you can think of., and 3. Describe each different type of model you listed. Responses were categorized by model type and the framework was updated through an iterative coding process. After four rounds of analysis of 30 different students’ responses, an acceptable percentage agreement was reached between independent researchers coding the data. Resulting frequencies of the various model types identified by students are presented along with representative student responses to provide insight into students’ understanding of models in STEM. This study is part of a larger project to understand the impact of modeling interventions on students’ awareness of models and their ability to build and apply models. 

   more » « less
2. Types of Models Identified by First-Year Engineering Students

   Rodgers, Kelsey J.; Thompson, Angela; Verleger, Matthew A.; Marbouti, Farshid; Shah, Nishith; Thaker, Pujan (July 2021, Zone 1 Conference of the American Society for Engineering Education)

   null (Ed.)

   Understanding models is important for engineering students, but not often taught explicitly in first-year courses. Although there are many types of models in engineering, studies have shown that engineering students most commonly identify prototyping or physical models when asked about modeling. In order to evaluate students’ understanding of different types of models used in engineering and the effectiveness of interventions designed to teach modeling, a survey was developed. This paper describes development of a framework to categorize the types of engineering models that first-year engineering students discuss based on both previous literature and students’ responses to survey questions about models. In Fall 2019, the survey was administered to first-year engineering students to investigate their awareness of types of models and understanding of how to apply different types of models in solving engineering problems. Students’ responses to three questions from the survey were analyzed in this study: 1. What is a model in science, technology, engineering, and mathematics (STEM) fields?, 2. List different types of models that you can think of., and 3. Describe each different type of model you listed. Responses were categorized by model type and the framework was updated through an iterative coding process. After four rounds of analysis of 30 different students’ responses, an acceptable percentage agreement was reached between independent researchers coding the data. Resulting frequencies of the various model types identified by students are presented along with representative student responses to provide insight into students’ understanding of models in STEM. This study is part of a larger project to understand the impact of modeling interventions on students’ awareness of models and their ability to build and apply models. 

   more » « less
3. Change in student understanding of modeling during first-year engineering courses

   https://doi.org/10.18260/1-2--34269  

   Marbouti, Farshid; Rodgers, Kelsey J.; Verleger, Matthew A. (June 2020, ASEE Annual Conference proceedings)

   All engineers must be able to apply and create models to be effective problem solvers, critical thinkers, and innovative designers. To be more successful in their studies and careers, students need a foundational knowledge about models. An adaptable approach can help students develop their modeling skills across a variety of modeling types, including physical models, mathematical models, logical models, and computational models. Physical models (e.g., prototypes) are the most common type of models that engineering students identify and discuss during the design process. There is a need to explicitly focus on varying types of models, model application, and model development in the engineering curriculum, especially on mathematical and computational models. This NSF project proposes two approaches to creating a holistic modeling environment for learning at two universities. These universities require different levels of revision to the existing first-year engineering courses or programs. The proposed approaches change to a unified language and discussion around modeling with the intent of contextualizing modeling as a fundamental tool within engineering. To evaluate student learning on modeling in engineering, we conducted pre and post surveys across three different first-year engineering courses at these two universities with different student demographics. The comparison between the pre and post surveys highlighted student learning on engineering modeling based on different teaching and curriculum change approaches. 

   more » « less
4. First-Year Engineering Students’ Understanding and Application of Models: Comparing Impact of CATIA vs. MATLAB Courses

   Shah, Nishith; Thaker, Pujan; Rodgers, Kelsey J.; Thompson, Angela; Verleger, Matthew A.; Marbouti, Farshid (March 2021, ASEE Southeastern Section Conference)

   null (Ed.)

   To succeed in engineering careers, students must be able to create and apply models to certain problems. The different types of modeling skills include physical, mathematical, computational, graphing, and financial. However, many students struggle to define and form relevant models in their engineering courses. We are hoping that the students are able to better define and apply models in their engineering courses after they have completed the MATLAB and/or CATIA courses. We also are hoping to see a difference in model identification between the MATLAB and CATIA courses. All students in the MATLAB and CATIA courses must be able to understand and create models in order to solve problems and think critically in engineering. Students need foundational knowledge about basic modeling skills that will be effective in their course. The goal is for students to create an approach to help them solve problems logically and apply different modeling skills. 

   more » « less
5. First-Year Engineering Students’ Understanding and Application of Models: Comparing Impact of CATIA vs. MATLAB Courses

   Shah, N; Thaker, P; Rodgers, K; Thompson, A; Verleger, M; Marbouti, F (April 2021, ASEE Southeastern Conference)

   null (Ed.)

   To succeed in engineering careers, students must be able to create and apply models to certain problems. The different types of modeling skills include physical, mathematical, computational, graphing, and financial. However, many students struggle to define and form relevant models in their engineering courses. We are hoping that the students are able to better define and apply models in their engineering courses after they have completed the MATLAB and/or CATIA courses. We also are hoping to see a difference in model identification between the MATLAB and CATIA courses. All students in the MATLAB and CATIA courses must be able to understand and create models in order to solve problems and think critically in engineering. Students need foundational knowledge about basic modeling skills that will be effective in their course. The goal is for students to create an approach to help them solve problems logically and apply different modeling skills. 

   more » « less