As a key potential component of future sixth-generation (6G) communication systems, terahertz (THz) technology has received much attention in recent years. However, a lack of effective high-speed direct modulation of THz waves has limited the development of THz communication technology. Currently, most high-speed modulators are based on photonic systems that can modulate electromagnetic waves with high speed using sophisticated optoelectronic conversion techniques. Yet, they usually suffer from low conversion efficiency of light to the THz range, resulting in low output power of the modulated THz waves. Here, we describe a guided-wave modulator for THz signals whose performance nearly matches that of existing in-line fiber-optic modulators. Our results demonstrate a maximum modulation depth greater than 20 dB (99%) and a maximum sinusoidal modulation speed of more than 30 GHz, with an insertion loss around 7 dB. We demonstrate the capabilities of this modulator in a point-to-point communication link with a 25 Gbit/s modulation speed. Our modulator design, based on near-field coupling of a THz transmission line to a single resonant meta-element, represents a powerful improvement for on-chip integrated high-performance THz devices.
- Award ID(s):
- 1810081
- NSF-PAR ID:
- 10183680
- Date Published:
- Journal Name:
- IEEE MTT-S Int. Microw. Symp. (IMS)
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
null (Ed.)This paper presents a novel low loss 3D system in package (SiP) approach for achieving antenna-on-chip integration. Specifically, this design uses 3D through silicon via (TSV) technology to achieve a vertical SiP phased array radio. The fully integrated package consists of a digital baseband chip, a radio frequency integrated circuit (RFIC), and lastly a microstrip patch phased array. The 3D TSVs achieve an insertion loss of less than 0.4 dB/pair at millimeter-wave frequencies. The differential fed microstrip patch array achieves a return loss of 40 dB at a 60 GHz center frequency with 4 GHz instantaneous bandwidth. The antenna array achieves an E and H plane realized gain of 17.1 dBi for a 4×4 element design. In addition, this design approach enables individual fabrication of each element to maximize yield with low cost assembly using ball grid array (BGA) technology. Lastly, this design does not require special design rules that comprise either transistor or antenna performance as compared to other methods outlined in antenna on chip design.more » « less
-
more » « less
Optical isolators, while commonplace in bulk and fiber optical systems, remain a key missing component in integrated photonics. Isolation using magneto-optic materials has been difficult to integrate into complementary metal–oxide–semiconductor (CMOS) fabrication platforms, motivating the use of other paths to effective non-reciprocity such as temporal modulation. We demonstrate a non-reciprocal element comprising a pair of microring modulators and a microring phase shifter in an active silicon photonic process, which, in combination with standard bandpass filters, yields an isolator on-chip. Isolation up to 13 dB is measured with a 3 dB bandwidth of 2 GHz and insertion loss of 18 dB. We also show transmission of a 4 Gbps optical data signal through the isolator while retaining a wide-open eye diagram. This compact design, in combination with increased modulation efficiency, could enable modulator-based isolators to become a standard ‘black-box’ component in integrated photonics CMOS foundry platform component libraries.
-
more » « less
There are increasing requirements for data center interconnection (DCI) services, which use fiber to connect any DC distributed in a metro area and quickly establish high-capacity optical paths between cloud services and mobile edge computing and the users. In such networks, coherent transceivers with various optical frequency ranges, modulators, and modulation formats installed at each connection point must be used to meet service requirements such as fast-varying traffic requests between user computing resources. This requires technology and architectures that enable users and DCI operators to cooperate to achieve fast provisioning of WDM links and flexible route switching in a short time, independent of the transceiver’s implementation and characteristics. We propose an approach to estimate the end-to-end (EtE) generalized signal-to-noise ratio (GSNR) accurately in a short time, not by measuring the GSNR at the operational route and wavelength for the EtE optical path but by simply applying a quality of transmission probe channel link by link, at a wavelength/modulation-format convenient for measurement. Assuming connections between transceivers of various frequency ranges, modulators, and modulation formats, we propose a device software architecture in which the DCI operator optimizes the transmission mode between user transceivers with high accuracy using only common parameters such as the bit error rate. In this paper, we first implement software libraries for fast WDM provisioning and experimentally build different routes to verify the accuracy of this approach. For the operational EtE GSNR measurements, the accuracy estimated from the sum of the measurements for each link was 0.6 dB, and the wavelength-dependent error was about 0.2 dB. Then, using field fibers deployed in the NSF COSMOS testbed, a Linux-based transmission device software architecture, and transceivers with different optical frequency ranges, modulators, and modulation formats, the fast WDM provisioning of an optical path was completed within 6 min.
-
Outdoor-to-indoor (OtI) signal propagation further challenges the already tight link budgets at millimeter-wave (mmWave). To gain insight into OtI mmWave scenarios at 28 GHz, we conducted an extensive measurement campaign consisting of over 2,200 link measurements. In total, 43 OtI scenarios were measured in West Harlem, New York City, covering seven highly diverse buildings. The measured OtI path gain can vary by up to 40 dB for a given link distance, and the empirical path gain model for all data shows an average of 30 dB excess loss over free space at distances beyond 50 m, with an RMS fitting error of 11.7 dB. The type of glass is found to be the single dominant feature for OtI loss, with 20 dB observed difference between empirical path gain models for scenarios with low-loss and high-loss glass. The presence of scaffolding, tree foliage, or elevated subway tracks, as well as difference in floor height are each found to have an impact between 5–10 dB. We show that for urban buildings with high-loss glass, OtI coverage can support 500 Mbps for 90% of indoor user equipment (UEs) with a base station (BS) antenna placed up to 49 m away. For buildings with low-loss glass, such as our case study covering multiple classrooms of a public school, data rates over 2.5/1.2 Gbps are possible from a BS 68/175 m away from the school building, when a line-of-sight path is available. We expect these results to be useful for the deployment of mmWave networks in dense urban environments as well as the developmore » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1109/IMS30576.2020.9223887
