skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Power-over-Tether UAS Leveraged for Nearly-Indefinite Meteorological Data Acquisition
Use of unmanned aerial systems (UASs) in agriculture has risen in the past decade. These systems are key to modernizing agriculture. UASs collect and elucidate data previously difficult to obtain and used to help increase agricultural efficiency and production. Typical commercial off-the-shelf (COTS) UASs are limited by small payloads and short flight times. Such limits inhibit their ability to provide abundant data at multiple spatiotemporal scales. In this paper, we describe the design and construction of the tethered aircraft unmanned system (TAUS), which is a novel power-over-tether UAS leveraging the physical presence of the tether to launch multiple sensors along the tether at multiple altitudes. With power from a ground station, the TAUS can acquire continuous data for several hours . The system is used to sense atmospheric conditions and temperature gradients across altitude. The development of the prototyped system is presented, along with the results of field experiments. The influence that power losses across the tether have on the sensors’ abilities to accurately sense is discussed. We demonstrate a 6-hour continuous flight at an altitude of 50 feet, and a 1-hour flight at sunset to acquire the gradually decreasing atmospheric temperature from an array of 6 sensors. An empirical evaluation of the system’s performance found that the prototype successively demonstrated proof of concept by considerably increasing flight times and throughput by simultaneously acquiring data from the sensor array. The TAUS will be improved by integrating performance-monitoring circuitry, elevated levels of algorithm-based autonomy, and multivariable sensors.  more » « less
Award ID(s):
1735362
PAR ID:
10184612
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
ASABE 2020 Annual International Meeting
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Earth System Science Data)
    null (Ed.)
    Abstract. This paper describes the data collected by the University of Nebraska-Lincoln (UNL) as part of the field deployments during the Lower Atmospheric Process Studies at Elevation – a Remotely-piloted Aircraft Team Experiment (LAPSE-RATE) flight campaign in July 2018.The UNL deployed two multirotor unmanned aerial systems (UASs) at multiple sites in the San Luis Valley (Colorado, USA) for data collection to support three science missions: convection initiation, boundary layer transition, and cold air drainage flow.We conducted 172 flights resulting in over 21 h of cumulative flight time.Our novel design for the sensor housing onboard the UAS was employed in these flights to meet the aspiration and shielding requirements of the temperature and humidity sensors and to separate them from the mixed turbulent airflow from the propellers.Data presented in this paper include timestamped temperature and humidity data collected from the sensors, along with the three-dimensional position and velocity of the UAS.Data are quality-controlled and time-synchronized using a zero-order-hold interpolation without additional post-processing.The full dataset is also made available for download at https://doi.org/10.5281/zenodo.4306086 (Islam et al., 2020). 
    more » « less
  2. ; (, Journal of Applied Mechanics)
    Abstract In this article, we study the characteristics of steady autorotation of a tethered autogyro. The phenomenon of autorotation refers to the natural spinning of a rotor in a wind field. We explore the viability of tethered autogyros as unmanned aerial vehicles (UAVs) for long-duration and energy efficient hovering applications, such as in monitoring or surveillance. The tether provides mooring and can be used to power the rotor and to transmit wind power to the ground when suitable. This is a novel application of autorotation. It requires a generalized formulation and modeling of autorotation, beyond what is reported in the literature. We adopt a model-based approach where the blade element momentum (BEM) method and catenary mechanics are used to model the aerodynamics and the tether, respectively. The resulting model is highly nonlinear and numerical methods are proposed to solve for the equilibria. The model is validated against existing simulation and experimental results in the literature. It is extended to incorporate new features that are pertinent to our application, such as low rotor speeds, regenerative torque for power generation, combining catenary mechanics with aerodynamics, and varying atmospheric conditions with altitude. We characterize the autorotational equilibria over a range of operating conditions involving multiple independent variables. The analysis reveals an optimal operating range of the tip speed ratio of the autogyro under equilibrium. It also indicates the possibility of power generation in large autogyros stationed at high altitudes. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Sensors)
    Concentrations of airborne chemical and biological agents from a hazardous release are not spread uniformly. Instead, there are regions of higher concentration, in part due to local atmospheric flow conditions which can attract agents. We equipped a ground station and two rotary-wing unmanned aircraft systems (UASs) with ultrasonic anemometers. Flights reported here were conducted 10 to 15 m above ground level (AGL) at the Leach Airfield in the San Luis Valley, Colorado as part of the Lower Atmospheric Process Studies at Elevation—a Remotely-Piloted Aircraft Team Experiment (LAPSE-RATE) campaign in 2018. The ultrasonic anemometers were used to collect simultaneous measurements of wind speed, wind direction, and temperature in a fixed triangle pattern; each sensor was located at one apex of a triangle with ∼100 to 200 m on each side, depending on the experiment. A WRF-LES model was used to determine the wind field across the sampling domain. Data from the ground-based sensors and the two UASs were used to detect attracting regions (also known as Lagrangian Coherent Structures, or LCSs), which have the potential to transport high concentrations of agents. This unique framework for detection of high concentration regions is based on estimates of the horizontal wind gradient tensor. To our knowledge, our work represents the first direct measurement of an LCS indicator in the atmosphere using a team of sensors. Our ultimate goal is to use environmental data from swarms of sensors to drive transport models of hazardous agents that can lead to real-time proper decisions regarding rapid emergency responses. The integration of real-time data from unmanned assets, advanced mathematical techniques for transport analysis, and predictive models can help assist in emergency response decisions in the future. 
    more » « less
  4. ; ; ; (, Sensors)
    null (Ed.)
    Traditional configurations for mounting Temperature–Humidity (TH) sensors on multirotor Unmanned Aerial Systems (UASs) often suffer from insufficient radiation shielding, exposure to mixed and turbulent air from propellers, and inconsistent aspiration while situated in the wake of the UAS. Descent profiles using traditional methods are unreliable (when compared to an ascent profile) due to the turbulent mixing of air by the UAS while descending into that flow field. Consequently, atmospheric boundary layer profiles that rely on such configurations are bias-prone and unreliable in certain flight patterns (such as descent). This article describes and evaluates a novel sensor housing designed to shield airborne sensors from artificial heat sources and artificial wet-bulbing while pulling air from outside the rotor wash influence. The housing is mounted above the propellers to exploit the rotor-induced pressure deficits that passively induce a high-speed laminar airflow to aspirate the sensor consistently. Our design is modular, accommodates a variety of other sensors, and would be compatible with a wide range of commercially available multirotors. Extensive flight tests conducted at altitudes up to 500 m Above Ground Level (AGL) show that the housing facilitates reliable measurements of the boundary layer phenomena and is invariant in orientation to the ambient wind, even at high vertical/horizontal speeds (up to 5 m/s) for the UAS. A low standard deviation of errors shows a good agreement between the ascent and descent profiles and proves our unique design is reliable for various UAS missions. 
    more » « less
  5. ; ; ; ; ; (, Atmospheric Measurement Techniques)
    Abstract. A novel fiber-optic distributed temperature sensing instrument, the Fiber-optic Laser Operated Atmospheric Temperature Sensor (FLOATS), was developed for continuous in situ profiling of the atmosphere up to 2 km below constant-altitude scientific balloons. The temperature-sensingsystem uses a suspended fiber-optic cable and temperature-dependent scattering of pulsed laser light in the Raman regime to retrieve continuous3 m vertical-resolution profiles at a minimum sampling period of 20 s.FLOATS was designed for operation aboard drifting super-pressure balloons inthe tropical tropopause layer at altitudes around 18 km as part of theStratéole 2 campaign. A short test flight of the system was conductedfrom Laramie, Wyoming, in January 2021 to check the optical, electrical, andmechanical systems at altitude and to validate a four-reference temperaturecalibration procedure with a fiber-optic deployment length of 1170 m. During the 4 h flight aboard a vented balloon, FLOATS retrieved temperatureprofiles during ascent and while at a float altitude of about 19 km. TheFLOATS retrievals provided differences of less than 1.0 ∘Ccompared to a commercial radiosonde aboard the flight payload during ascent.At float altitude, a comparison of optical length and GPS position at thebottom of the fiber-optic revealed little to no curvature in the fiber-opticcable, suggesting that the position of any distributed temperaturemeasurement can be effectively modeled. Comparisons of the distributed temperature retrievals to the reference temperature sensors show strongagreement with root-mean-square-error values less than 0.4 ∘C. Theinstrument also demonstrated good agreement with nearby meteorologicalobservations and COSMIC-2 satellite profiles. Observations of temperatureand wind perturbations compared to the nearby radiosounding profiles provide evidence of inertial gravity wave activity during the test flight. Spectral analysis of the observed temperature perturbations shows that FLOATS is an effective and pioneering tool for the investigation of small-scale gravity waves in the upper troposphere and lower stratosphere. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email