An official website of the United States government
View Video Presentation: https://doi.org/10.2514/6.2022-3218.vid The ability to accurately and rapidly assess unsteady interactional aerodynamics is a shortcoming and bottleneck in the design of various next-generation aerospace systems: from electric vertical takeoff and landing (eVTOL) aircraft to airborne wind energy (AWE) and wind farms. In this study, we present a meshless CFD framework based on the reformulated vortex particle method (rVPM) for the analysis of complex interactional aerodynamics. The rVPM is a large eddy simulation (LES) solving the Navier-Stokes equations in their vorticity form. It uses a meshless Lagrangian scheme, which not only avoids the hurdles of mesh generation, but it also conserves the vortical structure of wakes over long distances with minimal numerical dissipation, while being 100x faster than conventional mesh-based LES. Wings and rotating blades are introduced in the computational domain through actuator line and actuator surface models. Simulations are coupled with an aeroacoustics solver to predict tonal and broadband noise radiated by rotors. The framework, called FLOWUnsteady, is hereby released as an open-source code and extensively validated. Validation studies published in previous work by the authors are summarized, showcasing rotors across operating conditions with a rotor in hover, propellers, a wind turbine, and two side-by-side rotors in hover. Validation of rotor-wing interactions is presented simulating a tailplane with tip-mounted propellers and a blown wing with propellers mounted mid-span. The capabilities of the framework are showcased through the simulation of a tiltwing eVTOL vehicle and an AWE wind-harvesting aircraft, featuring rotors with variable RPM, variable pitch, tilting of wings and rotors, non-trivial flight paths, and complex aerodynamic interactions.
more »
« less
Equilibrium Behavior of a Tethered Autogyro: Application in Extended Flight and Power Generation
Abstract In this article, we study the characteristics of steady autorotation of a tethered autogyro. The phenomenon of autorotation refers to the natural spinning of a rotor in a wind field. We explore the viability of tethered autogyros as unmanned aerial vehicles (UAVs) for long-duration and energy efficient hovering applications, such as in monitoring or surveillance. The tether provides mooring and can be used to power the rotor and to transmit wind power to the ground when suitable. This is a novel application of autorotation. It requires a generalized formulation and modeling of autorotation, beyond what is reported in the literature. We adopt a model-based approach where the blade element momentum (BEM) method and catenary mechanics are used to model the aerodynamics and the tether, respectively. The resulting model is highly nonlinear and numerical methods are proposed to solve for the equilibria. The model is validated against existing simulation and experimental results in the literature. It is extended to incorporate new features that are pertinent to our application, such as low rotor speeds, regenerative torque for power generation, combining catenary mechanics with aerodynamics, and varying atmospheric conditions with altitude. We characterize the autorotational equilibria over a range of operating conditions involving multiple independent variables. The analysis reveals an optimal operating range of the tip speed ratio of the autogyro under equilibrium. It also indicates the possibility of power generation in large autogyros stationed at high altitudes.
more »
« less
- Award ID(s):
- 1762986
- PAR ID:
- 10355086
- Date Published:
- Journal Name:
- Journal of Applied Mechanics
- Volume:
- 89
- Issue:
- 9
- ISSN:
- 0021-8936
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The superior accuracy isogeometric analysis (IGA) brought to computations in fluid and solid mechanics has been yielding higher fidelity in computational aerodynamics. The increased accuracy we achieve with the IGA is in the flow solution, in representing the problem geometry, and, when we use the IGA basis functions also in time in a space–time (ST) framework, in representing the motion of solid surfaces. It is of course as part of a set of methods that the IGA has been very effective in computational aerodynamics, including complex-geometry aerodynamics. The set of methods we have been using can be categorized into those that serve as a core method, those that increase the accuracy, and those that widen the application range. The core methods are the residual-based variational multiscale (VMS), ST-VMS and arbitrary Lagrangian–Eulerian VMS methods. The IGA and ST-IGA are examples of the methods that increase the accuracy. The complex-geometry IGA mesh generation method is an example of the methods that widen the application range. The ST Topology Change method is another example of that. We provide an overview of these methods for IGA-based computational aerodynamics and present examples of the computations performed. In computational flow analysis with moving solid surfaces and contact between the solid surfaces, it is a challenge to represent the boundary layers with an accuracy attributed to moving-mesh methods and represent the contact without leaving a mesh protection gap.more » « less
-
Abstract Flow modifications induced by wind turbine rotors on the incoming atmospheric boundary layer (ABL), such as blockage and speedups, can be important factors affecting the power performance and annual energy production (AEP) of a wind farm. Further, these rotor‐induced effects on the incoming ABL can vary significantly with the characteristics of the incoming wind, such as wind shear, veer, and turbulence intensity, and turbine operative conditions. To better characterize the complex flow physics underpinning the interaction between turbine rotors and the ABL, a field campaign was performed by deploying profiling wind LiDARs both before and after the construction of an onshore wind turbine array. Considering that the magnitude of these rotor‐induced flow modifications represents a small percentage of the incoming wind speed ( ), high accuracy needs to be achieved for the analysis of the experimental data and generation of flow predictions. Further, flow distortions induced by the site topography and effects of the local climatology need to be quantified and differentiated from those induced by wind turbine rotors. To this aim, a suite of statistical and machine learning models, such as k‐means cluster analysis coupled with random forest predictions, are used to quantify and predict flow modifications for different wind and atmospheric conditions. The experimental results show that wind velocity reductions of up to 3% can be observed at an upstream distance of 1.5 rotor diameter from the leading wind turbine rotor, with more significant effects occurring for larger positive wind shear. For more complex wind conditions, such as negative shear and low‐level jet, the rotor induction becomes highly complex entailing either velocity reductions (down to 9%) below hub height and velocity increases (up to 3%) above hub height. The effects of the rotor induction on the incoming wind velocity field seem to be already roughly negligible at an upstream distance of three rotor diameters. The results from this field experiment will inform models to simulate wind‐turbine and wind‐farm operations with improved accuracy for flow predictions in the proximity of the rotor area, which will be instrumental for more accurate quantification of wind farm blockage and relative effects on AEP.more » « less
-
Improved integration of wind farms into frequency regulation services is vital for increasing renewable energy production while ensuring power system stability. This work generalizes a recently proposed model-based receding horizon wind farm controller for secondary frequency regulation to arbitrary wind farm layouts and augments the controller to enable power modulation through storage of kinetic energy in the rotor. The new design explicitly includes actuation of blade pitch and generator torque, which facilitates implementation in existing farms as it takes advantage of current wind turbine control loops. This generalized control design improves control authority by individually controlling each turbine and using kinetic energy stored in the rotor in a coordinated manner to achieve farm level control goals. Numerical results demonstrate the effectiveness of this approach; in particular, the controller achieves accurate power tracking and reduces loss of revenue in the bulk power market by requiring less setpoint reduction (derate) than the power level control range.more » « less
-
To maximize the profitability of wind power plants, wind farms are often characterized by high wind turbine density leading to operations with reduced turbine spacing. As a consequence, the overall wind farm power capture is hindered by complex flow features associated with flow modifications induced by the various wind turbine rotors. In addition to the generation of wakes, the velocity of the incoming wind field can reduce due to the increased pressure in the proximity of a single turbine rotor (named induction); a similar effect occurs at the wind-farm level (global blockage), which can have a noticeable impact on power production. On the other hand, intra-wind-farm regions featuring increased velocity compared to the freestream (speedups) have also been observed, which can be a source for a potential power boost. To quantify these rotor-induced effects on the incoming wind velocity field, three profiling LiDARs and one scanning wind LiDAR were deployed both before and after the construction of an onshore wind turbine array. The different wind conditions are classified according to the ambient turbulence intensity and streamwise/spanwise spacing among wind turbines. The analysis of the mean velocity field reveals enhanced induction and speedup under stably stratified atmospheric conditions. Furthermore, a reduced horizontal area between adjacent turbines has a small impact on the induction zone but increases significantly the speedup between adjacent rotors.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1115/1.4054927
