skip to main content


Title: CO2 and H2O in Plagioclase-Hosted Melt Inclusions from Ocean-Ridge Lavas: An Indicator of Crystallization in the Lower Oceanic Crust
Interpretation of erupted products we observe on the seafloor requires that we understand the petrogenesis of melts in the oceanic crust and where crystallization initially takes place. Our work focuses on estimating depth of crystallization of the plagioclase megacrysts using CO2 and H2O concentrations from plagioclase ultraphyric basalts (PUBs). Samples were analyzed from the Lucky Strike segment on the Mid-Atlantic Ridge and from three locations on the Juan de Fuca Ridge (West Valley, Endeavor Segment, and Axial Segment). Melt inclusions were re-homogenized to remove the effects of post-entrapment crystallization. The CO2 in the vapor bubbles present in the melt inclusions were analyzed at Virginia Tech using Raman spectroscopy, and associated glassy melt inclusions were analyzed at WHOI using the ion microprobe for CO2 and H2O. Vapor-saturation pressures calculated from these volatiles stored in melt inclusions and vapor bubbles range from 359-3994 bars, corresponding to depths of 1.0-11.4 km below the sea floor. The proportion of CO2 partitioned in the bubbles range from 11-98%. In summary, about 14% of the melt inclusions from Lucky Strike record crystallization depths of 3-4 km, consistent with the depth of the seismically imaged melt lens, whereas ~55% of melt inclusions crystallized at depths >4 km with a maximum at 9.8 km. These data are similar to depths of formation determined through olivine-hosted melt inclusions from the same segment (Wanless et al., 2015), although a greater portion of plagioclase-hosted melt inclusions record crystallization below the melt lens. At the Juan de Fuca ridge, ~24% of the melt inclusions record crystallization depths of 2-3 km, consistent with a seismically imaged mid-crustal magma chamber at the Endeavor Segment, while an additional ~62% crystallize at depths >3 km with a maximum at 11.4 km. This suggests that while crystallization can be focused within the melt lenses and magma chambers at these ridge localities, a significant and greater proportion of the megacrysts were sampled from the lower crust or upper mantle.  more » « less
Award ID(s):
1634206
NSF-PAR ID:
10191142
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
American Geophysical Union, Fall Meeting 2019, abstract #V13C-0172
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract The Bishop Tuff (BT), erupted from the Long Valley caldera in California, displays two types of geochemical gradients with temperature: one is related to magma mixing, whereas the other is found in the high-SiO2 rhyolite portion of the Bishop Tuff and is characterized by twofold or lower concentration variations in minor and trace elements that are strongly correlated with temperature. It is proposed that the latter zonation, which preceded phenocryst growth, developed as a result of mineral–melt partitioning between interstitial melt and surrounding crystals in a parental mush, from which variable melt fractions were segregated. To test this hypothesis, trends of increasing vs decreasing element concentrations with temperature (as a proxy for melt fraction), obtained from published data on single-clast pumice samples from the high-SiO2 rhyolite portion of the Bishop Tuff, were used to infer their relative degrees of incompatibility vs compatibility between crystals and melt in the parental mush. Relative compatibility values (RCVi) for all elements i, defined as the concentration slope with temperature divided by average concentration, are shown to be linearly correlated with their respective bulk partition coefficients (bulk Di). Mineral–melt partition coefficients from the literature were used to constrain the average stoichiometry of the crystallization/melting reaction in the parental mush: 32 % quartz + 34 % plagioclase + 31 % K-feldspar + 1·60 % biotite + 0·42 % titanomagnetite + 0·34 % ilmenite + 0·093 % allanite + 0·024 % zircon + 0·025 % apatite = 100 % liquid. The proportions of tectosilicates in the reaction (i.e. location of eutectic) are consistent with depths of melt segregation of ~400–550 MPa and an activity of H2O of ~0·4–0·6. Temperatures of <770–780 °C are constrained by allanite in the reaction. Evidence that a fluid phase was present in the parental mush is seen in the decreasing versus increasing H2O and CO2 contents with temperature in the segregated interstitial melt that formed the high-SiO2 rhyolite portion of the Bishop Tuff. The presence of an excess fluid phase, which strongly partitions CO2 relative to the melt, is required to explain the compatible behavior of CO2, whereas the fluid abundance must have been low to explain the incompatible behavior of H2O. Calculated degassing paths for interstitial melts, which segregated from the parental mush and ascended to shallower depths to grow phenocrysts, match published volatile analyses in quartz-hosted melt inclusions and constrain fluid abundances in the mush to be ≤1 wt%. The source of volatiles in the parental mush, irrespective of whether it formed by crystallization or partial melting, must have been primarily from associated basalts, as granitoid crust is too volatile poor. Approximately twice as much basalt as rhyolite is needed to provide the requisite volatiles. The determination of bulk Di for several elements gives the bulk composition of the parental leucogranitic mush and shows that it is distinct from Mesozoic Sierran arc granitoids, as expected. Collectively, the results from this study provide new constraints for models of the complex, multi-stage processes throughout the Plio-Quaternary, involving both mantle-derived basalt and pre-existing crust, that led to the origin of the parental body to the Bishop Tuff. 
    more » « less
  2. Abstract

    Magmas with matrix glass compositions ranging from basalt to dacite erupted from a series of 24 fissures in the first 2 weeks of the 2018 Lower East Rift Zone (LERZ) eruption of Kīlauea Volcano. Eruption styles ranged from low spattering and fountaining to strombolian activity. Major element trajectories in matrix glasses and melt inclusions hosted by olivine, pyroxene and plagioclase are consistent with variable amounts of fractional crystallization, with incompatible elements (e.g., Cl, F, and H2O) becoming enriched by 4–5 times as melt MgO contents evolve from 6 to 0.5 wt%. The high viscosity and high H2O contents (∼2 wt%) of the dacitic melts erupting at Fissure 17 account for the explosive Strombolian behavior exhibited by this fissure, in contrast to the low fountaining and spattering observed at fissures erupting basaltic to basaltic‐andesite melts. Saturation pressures calculated from melt inclusion CO2‐H2O contents indicate that the magma reservoir(s) supplying these fissures was located at ∼2–3 km depth, which is in agreement with the depth of a dacitic magma body intercepted during drilling in 2005 (∼2.5 km) and a seismically imaged lowVp/Vsanomaly (∼2 km depth). Nb/Y ratios in erupted products are similar to lavas erupted between 1955 and 1960, indicating that melts were stored and underwent variable amounts of crystallization in the LERZ for >60 years before being remobilized by a dike intrusion in 2018. We demonstrate that extensive fractional crystallization generates viscous and volatile‐rich magma with potential for hazardous explosive eruptions, which may be lurking undetected at many ocean island volcanoes.

     
    more » « less
  3. Abstract

    Recent multi‐channel seismic studies of fast spreading and hot‐spot influenced mid‐ocean ridges reveal magma bodies located beneath the mid‐crustal Axial Magma Lens (AML), embedded within the underlying crustal mush zone. We here present new seismic images from the Juan de Fuca Ridge that show reflections interpreted to be from vertically stacked magma lenses in a number of locations beneath this intermediate‐spreading ridge. The brightest reflections are beneath Northern Symmetric segment, from ∼46°42′‐52′N and Split Seamount, where a small magma body at local Moho depths is also detected, inferred to be a source reservoir for the stacked magma lenses in the crust above. The imaged magma bodies are sub‐horizontal, extend continuously for along‐axis lengths of ∼1–8 km, with the shallowest located at depths of ∼100–1,200 m below the AML, and are similar to sub‐AML bodies found at the East Pacific Rise. At both ridges, stacked sill‐like lenses are detected beneath only a small fraction of the ridge length examined and are inferred to mark local sites of higher melt flux and active replenishment from depth. The imaged magma lenses are focused in the upper part of the lower crust, which coincides with the most melt rich part of the crystal mush zone detected in other geophysical studies and where sub‐vertical fabrics are observed in geologic exposures of oceanic crust. We infer that the multi‐level magma accumulations are ephemeral and may result from porous flow and mush compaction, and that they can be tapped and drained during dike intrusion and eruption events.

     
    more » « less
  4. Abstract

    A collection of quaternary, high-MgO (≤13.4 wt%) basanite and minette cinder and lava cones, with an enhanced arc geochemical signature, are located along the northern margin of the N–S Colima rift in western Mexico. The Colima rift overlies the lithospheric suture between the Jalisco block and Guerrero terrane, as well as the tear between the Rivera and Cocos subducting oceanic plates. From the literature, volatile analyses of olivine-hosted melt inclusions in the Colima cone samples document notably high concentrations of dissolved H2O in the melt (≤ 7.0 wt%) as well as degassing-induced phenocryst growth over a range of depths ≤25 km. In this study, it is shown that the high-MgO character of the Colima suite reflects liquid compositions, consistent with evidence for their rapid transit to the surface, without stalling in a crustal magma chamber. The most Mg-rich olivine analyzed in each sample matches the equilibrium composition at the liquidus based on olivine-melt Mn–Mg and Fe2+–Mg exchange coefficients. Application of both a Mg- and Ni-based olivine-melt thermometer, calibrated on the same experimental data set, to the Colima cone suite provides the temperature and dissolved H2O content at the liquidus. Because the Ni thermometer is insensitive to dissolved H2O in the melt, it gives the actual temperature at the onset of olivine phenocryst growth. For the nine Colima samples that range from 13.4–9.2 wt% MgO, resulting temperatures range from 1221°C to 1056°C (± 6–11°C). In contrast, the Mg thermometer is sensitive to dissolved H2O in the melt, and its application (without a correction of H2O) gives the temperature of olivine crystallization under anhydrous conditions. When the Mg- and Ni-based temperatures are paired, the depression of the liquidus (∆T = TMg–TNi) due to dissolved H2O can be obtained. For the high-MgO (>9 wt%) Colima samples, ∆T values range from 188°C to 109°C. Corrections for the effect of pressure (i.e. evidence that phenocryst growth began at ~700 MPa), increase ∆T by ~21°C. An updated model calibration (on experiments from the literature) that relates ∆T with dissolved H2O in the melt shows that the best fit (R2 = 0.95) is linear, wt% H2O = 0.047*∆T, with a standard error of ±0.5 wt%. Although the experimental data set spans a wide range of melt composition (e.g. 47–58 wt% SiO2, 4.4–10.2 wt% MgO, 1.3–4.9 wt% Na2O, 0.1–5.0 wt% K2O, 0.3–5.3 wt% H2O), no dependence on anhydrous melt composition is resolved. Application of this updated model to the Colima suite gives H2O contents of 5.1–8.8 wt% H2O, consistent with those analyzed in olivine-hosted MIs from the literature. When the thermometry and hygrometry results for the Colima cone suite are compared to those for the adjacent calc–alkaline basalts from the Tancítaro Volcanic Field (TVF) in Michoacán, two distinct linear trends in a plot of wt% H2O vs. temperature are found, indicative of different mantle sources. It is proposed that the high-MgO (>11 wt%) Colima cone melts were derived from a phlogopite-bearing harzburgitic mantle at the base of the Jalisco block lithosphere, whereas both TVF and Colima melts with ≤10 wt% MgO were derived from the asthenosphere (i.e. arc mantle wedge). In both mantle sources, slab-derived fluids were an important source of H2O.

     
    more » « less
  5. Abstract

    Plagioclase ultraphyric basalts (PUBs) are a class of mid‐ocean ridge (MOR) lavas found in a variety of ocean floor environments, are characterized by abundant (15–40 volume %) plagioclase megacrysts and a diverse trace element and isotopic signature. Paradoxically, we never see lavas erupted on the seafloor that are in equilibrium with these PUB megacrysts. Based on petrographic evidence, melt inclusion composition, and new data on depth of entrapment calculated from CO2contents in plagioclase‐hosted inclusions, many of the megacrysts formed at upper mantle pressures (∼3–7 kbars). To constrain the composition of the parent magmas of the plagioclase megacrysts, we conducted a series of experiments at 5 and 10 kbars using mid‐ocean ridge basalts glasses as starting materials. The experimental results were consistent with the presence of a pseudoazeotrope in the anorthitic segment of the plagioclase + basalt pseudobinary. This has the effect of dropping the anorthitic end of the feldspar loop, lowering the solidus for upper mantle conditions, and driving evolving magmas toward higher Ca. As magmas rise and pressure drops, the pseudoazeotrope disappears, and the feldspar loop at the high‐An end rises, causing those magmas to undergo decompression crystallization of plagioclase and resorption of olivine. Therefore, the conditions which generated the magmas from which the megacrysts form disappear as the magmas rise and magmas evolve toward lower Ca, Mg (as we normally assume during plagioclase + olivine crystallization). In effect, the phase equilibria conditions that allow for the generation of such liquids also prevent them from being erupted as lavas.

     
    more » « less