More Like this

1. Blackbody-cavity ideal absorbers for solar energy harvesting

   https://doi.org/10.1038/s41598-020-77372-9  

   Tian, Yanpei; Liu, Xiaojie; Ghanekar, Alok; Chen, Fangqi; Caratenuto, Andrew; Zheng, Yi (December 2020, Scientific Reports)

   null (Ed.)

   Abstract Spectrally selective solar absorbers (SSAs), which harvest heat from sunlight, are the key to concentrated solar thermal systems. An ideal SSA must have an absorptivity of unity in the solar irradiance wavelength region (0.3–2.5  $$\upmu $$ μ m), and its infrared thermal emissivity must be zero to depress spontaneous blackbody irradiation (2.5–25  $$\upmu $$ μ m). Current SSA designs which utilize photonic crystals, metamaterials, or cermets are either cost-inefficient due to the complexity of the required nanofabrication methods, or have limited applicability due to poor thermal stability at high temperatures. We conceptually present blackbody-cavity solar absorber designs with nearly ideal spectrally selective properties, capable of being manufactured at scale. The theoretical analyses show that the unity solar absorptivity of the blackbody cavity and nearly zero infrared emissivity of the SSA’s outer surface allow for a stagnation temperature of 880  $$^\circ $$ ∘ C under 10 suns. The performance surpasses state-of-the-art SSAs manufactured using nanofabrication methods. This design relies only on traditional fabrication methods, such as machining, casting, and polishing. This makes it suitable for large-scale industrial applications, and the “blackbody cavity” feature enables easy integration with existing concentrated solar thermal systems using the parabolic reflector and Fresnel lens as optical concentrators. 

   more » « less
2. Designing Metasurfaces for Efficient Solar Energy Conversion

   https://doi.org/10.1021/acsphotonics.3c01013  

   Mascaretti, Luca; Chen, Yuheng; Henrotte, Olivier; Yesilyurt, Omer; Shalaev, Vladimir M; Naldoni, Alberto; Boltasseva, Alexandra (December 2023, ACS Photonics)

   Metasurfaces have recently emerged as a promising technological platform, offering unprecedented control over light by structuring materials at the nanoscale using two-dimensional arrays of subwavelength nanoresonators. These metasurfaces possess exceptional optical properties, enabling a wide variety of applications in imaging, sensing, telecommunication, and energy-related fields. One significant advantage of metasurfaces lies in their ability to manipulate the optical spectrum by precisely engineering the geometry and material composition of the nanoresonators’ array. Consequently, they hold tremendous potential for efficient solar light harvesting and conversion. In this Review, we delve into the current state-of-the-art in solar energy conversion devices based on metasurfaces. First, we provide an overview of the fundamental processes involved in solar energy conversion, alongside an introduction to the primary classes of metasurfaces, namely, plasmonic and dielectric metasurfaces. Subsequently, we explore the numerical tools used that guide the design of metasurfaces, focusing particularly on inverse design methods that facilitate an optimized optical response. To showcase the practical applications of metasurfaces, we present selected examples across various domains such as photovoltaics, photoelectrochemistry, photocatalysis, solar-thermal and photothermal routes, and radiative cooling. These examples highlight the ways in which metasurfaces can be leveraged to harness solar energy effectively. By tailoring the optical properties of metasurfaces, significant advancements can be expected in solar energy harvesting technologies, offering new practical solutions to support an emerging sustainable society. 

   more » « less
3. Electrospun Cadmium Selenide Nanoparticles-Loaded Cellulose Acetate Fibers for Solar Thermal Application

   https://doi.org/10.3390/nano10071329  

   Angel, Nicole; Vijayaraghavan, S. N.; Yan, Feng; Kong, Lingyan (July 2020, Nanomaterials)

   null (Ed.)

   Solar thermal techniques provide a promising method for the direct conversion of solar energy to thermal energy for applications, such as water desalination. To effectively realize the optimal potential of solar thermal conversion, it is desirable to construct an assembly with localized heating. Specifically, photoactive semiconducting nanoparticles, when utilized as independent light absorbers, have successfully demonstrated the ability to increase solar vapor efficiency. Additionally, bio-based fibers have shown low thermal conductive photocorrosion. In this work, cellulose acetate (CA) fibers were loaded with cadmium selenide (CdSe) nanoparticles to be employed for solar thermal conversion and then subsequently evaluated for both their resulting morphology and conversion potential and efficiency. Electrospinning was employed to fabricate the CdSe-loaded CA fibers by adjusting the CA/CdSe ratio for increased solar conversion efficiency. The microstructural and chemical composition of the CdSe-loaded CA fibers were characterized. Additionally, the optical sunlight absorption performance was evaluated, and it was demonstrated that the CdSe nanoparticles-loaded CA fibers have the potential to significantly improve solar energy absorption. The photothermal conversion under 1 sun (100 mW/cm2) demonstrated that the CdSe nanoparticles could increase the temperature up to 43 °C. The CdSe-loaded CA fibers were shown as a feasible and promising hybrid material for achieving efficient solar thermal conversion. 

   more » « less
4. Piston-Type Optical Modulator for Dynamic Thermal Radiation Tuning Applications

   https://doi.org/10.3390/ma14164372  

   Caratenuto, Andrew; Zheng, Yi (August 2021, Materials)

   This study introduces a movable piston-like structure that provides a simple and cost-effective avenue for dynamically tuning thermal radiation. This structure leverages two materials with dissimilar optical responses—graphite and aluminum—to modulate from a state of high reflectance to a state of high absorptance. A cavity is created in the graphite to house an aluminum cylinder, which is displaced to actuate the device. In its raised state, the large aluminum surface area promotes a highly reflective response, while in its lowered state, the expanded graphite surface area and blackbody cavity-like interactions significantly enhance absorptance. By optimizing the area ratio, reflectance tunability of over 30% is achieved for nearly the entire ultraviolet, visible, and near-infrared wavelength regions. Furthermore, a theoretical analysis postulates wavelength-dependent effectivenesses as high as 0.70 for this method, indicating that tunabilities approaching 70% can be achieved by exploiting near-ideal absorbers and reflectors. The analog nature of this control method allows for an infinitely variable optical response between the upper and lower bounds of the device. These valuable characteristics would enable this material structure to serve practical applications, such as reducing cost and energy requirements for environmental temperature management operations. 

   more » « less
5. Thermal Management Systems and Waste Heat Recycling by Thermoelectric Generators—An Overview

   https://doi.org/10.3390/en14185646  

   Hooshmand Zaferani, Sadeq; Jafarian, Mehdi; Vashaee, Daryoosh; Ghomashchi, Reza (September 2021, Energies)

   null (Ed.)

   With the fast evolution in greenhouse gas (GHG) emissions (e.g., CO2, N2O) caused by fossil fuel combustion and global warming, climate change has been identified as a critical threat to the sustainable development of human society, public health, and the environment. To reduce GHG emissions, besides minimizing waste heat production at the source, an integrated approach should be adopted for waste heat management, namely, waste heat collection and recycling. One solution to enable waste heat capture and conversion into useful energy forms (e.g., electricity) is employing solid-state energy converters, such as thermoelectric generators (TEGs). The simplicity of thermoelectric generators enables them to be applied in various industries, specifically those that generate heat as the primary waste product at a temperature of several hundred degrees. Nevertheless, thermoelectric generators can be used over a broad range of temperatures for various applications; for example, at low temperatures for human body heat harvesting, at mid-temperature for automobile exhaust recovery systems, and at high temperatures for cement industries, concentrated solar heat exchangers, or NASA exploration rovers. We present the trends in the development of thermoelectric devices used for thermal management and waste heat recovery. In addition, a brief account is presented on the scientific development of TE materials with the various approaches implemented to improve the conversion efficiency of thermoelectric compounds through manipulation of Figure of Merit, a unitless factor indicative of TE conversion efficiency. Finally, as a case study, work on waste heat recovery from rotary cement kiln reactors is evaluated and discussed. 

   more » « less