- Award ID(s):
- 1726332
- NSF-PAR ID:
- 10210497
- Date Published:
- Journal Name:
- Nanomaterials
- Volume:
- 9
- Issue:
- 12
- ISSN:
- 2079-4991
- Page Range / eLocation ID:
- 1670
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Zinc oxide nanoparticles (ZnO-NPs) have piqued the curiosity of researchers all over the world due to their extensive biological activity. They are less toxic and biodegradable with the capacity to greatly boost pharmacophore bioactivity. ZnO-NPs are the most extensively used metal oxide nanoparticles in electronic and optoelectronics because of their distinctive optical and chemical properties which can be readily modified by altering the morphology and the wide bandgap. The biosynthesis of nanoparticles using extracts of therapeutic plants, fungi, bacteria, algae, etc., improves their stability and biocompatibility in many biological settings, and its biofabrication alters its physiochemical behavior, contributing to biological potency. As such, ZnO-NPs can be used as an effective nanocarrier for conventional drugs due to their cost-effectiveness and benefits of being biodegradable and biocompatible. This article covers a comprehensive review of different synthesis approaches of ZnO-NPs including physical, chemical, biochemical, and green synthesis techniques, and also emphasizes their biopotency through antibacterial, antifungal, anticancer, anti-inflammatory, antidiabetic, antioxidant, antiviral, wound healing, and cardioprotective activity. Green synthesis from plants, bacteria, and fungus is given special attention, with a particular emphasis on extraction techniques, precursors used for the synthesis and reaction conditions, characterization techniques, and surface morphology of the particles.more » « less
-
Abstract Bacterial infection of implanted biomaterials is a serious problem that increases health care costs and negatively affects a considerable fraction of orthopedic procedures. In this field, magnesium oxide nanoparticles (MgO NPs) have emerged as a promising material to combat bacterial infection while maintaining or improving bone cell functions. Here, MgO NPs were electrophoretically deposited onto poly‐L‐lactic acid (PLLA) sheets to achieve a coating of highly exposed MgO NPs that directly influenced cell‐substrate interactions at short time scales. Samples were characterized for their surface chemistry, crystal structure, roughness, wettability, degradation characteristics, and their ability to support the growth of human fibroblasts and osteoblasts, as well as their resistance to colonization by
Staphylococcus aureus ,Staphylococcus epidermidis , andPseudomonas aeruginosa . In general, increasing the applied voltage during deposition increased the surface coverage of the coating and significantly decreased the colonization of all three bacterial strains (up to a 90% reduction). Furthermore,S. aureus cells that did attach onto substrates prepared at high voltages exhibited trademark signs of membrane damage and cell death. Importantly, MTS cell viability assays indicated that osteoblast adhesion increased with increasing deposition voltage, while fibroblast adhesion exhibited the opposite trend. Thus, although requiring more studies, this research provides the first evidence that MgO NP coatings prepared at relatively high voltages (120–150 V) may have the ability to resist bacterial colonization, promote bone cell attachment, and curb fibrous capsule formation. Therefore, it is recommended that this technology be further investigated and developed for numerous orthopedic applications. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 3136–3147, 2017. -
Fusobacterium nucleatum is implicated in accelerating colorectal cancer (CRC) and is found within metastatic CRC cells in patient biopsies. Here, we found that bacterial invasion of CRC cells and cocultured immune cells induced a differential cytokine secretion that may contribute to CRC metastasis. We used a modified galactose kinase markerless gene deletion approach and found thatF. nucleatum invaded cultured HCT116 CRC cells through the bacterial surface adhesin Fap2. In turn, Fap2-dependent invasion induced the secretion of the proinflammatory cytokines IL-8 and CXCL1, which are associated with CRC progression and promoted HCT116 cell migration. Conditioned medium fromF. nucleatum –infected HCT116 cells caused naïve cells to migrate, which was blocked by depleting CXCL1 and IL-8 from the conditioned medium. Cytokine secretion from HCT116 cells and cellular migration were attenuated by inhibitingF. nucleatum host-cell binding and entry using galactose sugars,l -arginine, neutralizing membrane protein antibodies, orfap2 deletion.F. nucleatum also induces the mobilization of immune cells in the tumor microenvironment. However, in neutrophils and macrophages, the bacterial-induced secretion of cytokines was Fap2 independent. Thus, our findings show thatF. nucleatum both directly and indirectly modulates immune and cancer cell signaling and migration. Because increased IL-8 and CXCL1 production in tumors is associated with increased metastatic potential and cell seeding, poor prognosis, and enhanced recruitment of tumor-associated macrophages and fibroblasts, we propose that inhibition of host-cell binding and invasion, potentially through vaccination or novel galactoside compounds, could be an effective strategy for reducingF. nucleatum –associated CRC metastasis. -
Abstract Molecular dynamics simulations of particle impact have been conducted for a ceramic with mixed ionic-covalent bonding. For these simulations, individual zinc oxide (ZnO) nanoparticles (NPs) were impacted onto a ZnO substrate to observe the effects of impact velocity (1500–3500 m s−1) and particle diameter (10, 20, and 30 nm) on particle deformation and film formation mechanisms that arise during the micro-cold spray process for producing films. The study shows that a critical impact velocity range exists, generally between 1500 and 3000 m s−1, for sticking of the NP to the substrate. Results suggest that solid-state amorphization-induced viscous flow is the primary deformation mechanism present during impact. Decreasing particle diameter and increasing impact velocity results in an increased degree of amorphization and higher local temperatures within the particle. The impact behavior of mixed ionic-covalent bonded ZnO is compared to the behavior of previously studied ionic and covalent materials.
-
Abstract Zinc oxide (ZnO) nanowires are widely studied for use in ultraviolet optoelectronic devices, such as nanolasers and sensors. Nanowires (NWs) with an MgO shell exhibit enhanced band‐edge photoluminescence (PL), a result previously attributed to passivation of ZnO defects. However, we find that processing the ZnO NWs under low oxygen partial pressure leads to an MgO‐thickness‐dependent PL enhancement owing to the formation of optical cavity modes. Conversely, processing under higher oxygen partial pressure leads to NWs that support neither mode formation nor band‐edge PL enhancement. High‐resolution electron microscopy and density‐functional calculations implicate the ZnO
m‐ plane surface morphology as the key determinant of core‐shell structure and cavity‐mode optics. A ZnO surface with atomic steps along them‐ plane in thec‐ axis direction stimulates the growth of a smooth MgO shell that supports guided‐wave optical modes and enhanced UV PL. On the other hand, a smoother ZnO surface leads to nucleation of a rough cladding layer which supports neither enhanced UV PL nor optical cavity modes. Finite‐element analysis shows a clear correlation between allowed Fabry‐Perot and whispering gallery modes and enhanced UV‐PL. These results point the way to fabricating ZnO/MgO core‐shell nanowires for more efficient UV nanolasers, scintillators, and sensors.