skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: 4x4 Hybrid Electric Vehicle vs. Fully Electric Vehicle Mobility in Drastically Changing Terrain Conditions
Active driveline technologies allow vehicles to dynamically control power distribution among driving wheels to improve vehicle operational parameters that impact terrain mobility. Two 4x4 electrified drivelines are compared which provide a variable power split: a hybrid electric vehicle with a controllable power transmitting unit and a fully electric vehicle (FEV) with individual electric wheel drives. The individual e-drives have the potential to improve mobility when the left and right wheel terrain conditions are drastically different.  more » « less
Award ID(s):
1849264
PAR ID:
10214004
Author(s) / Creator(s):
Date Published:
Journal Name:
Proceedings of the 3rd International Conference of IFToMM Italy
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, 27th IAVSD Symposium on Dynamics of Vehicles on Roads and Tracks)
    Electric vehicles with the wheels individually driven by e-motors have promising potential for improving performance through finer control over the power distribution among the wheels. Due to the absence of a mechanical driveline to connect the wheels to the transmission and engine, the virtual driveline system (VDS) is proposed as a conceptual framework to connect virtu-ally the individual electric motors and, thus, to optimize and analyze the dynam-ics and performance of vehicles. Conceptually, the VDS is based on vehicle-gen-eralized parameters (VGP), which are used in the VDS principle to establish re-lationships between VGPs and, thus, to manage the wheel power split and set up interactive/coordinated controls of the e-motors to optimize and improve energy efficiency, terrain mobility performance, maneuver, etc. Keywords: Vehicle Dynamics Theory, Modeling 
    more » « less
  2. ; (, Proceedings of the 2020 USCToMM Symposium on Mechanical Systems and Robotics)
    null (Ed.)
    Bringing vehicle autonomy to the level of its driveline system means that the autonomous vehicle has the capability to autonomously control the distribution of power between its driving wheels. A vehicle can therefore improve mobility by autonomously redistributing wheel power. For this implementation, vehicle mobility must first be quantified by suitable mobility indices, derived from vehicle dynamics, to numerically show a wheel or vehicle is close to immobilization as well as evaluate the effect of mobility improvements on the vehicle velocity. A velocity-based mobility index combines wheel traction with velocity to maximize effectiveness of movement. Computer simulations demonstrate the potential to improve velocity by optimizing vehicle mobility of a 4x4 vehicle with a hybrid electric power transmitting unit. 
    more » « less
  3. ; ; (, Proceedings of the ISTVS 20th International and 9th Americas Conference)
    This paper presents mobility modes and control methods for the SnoWorm, a passively-articulated multi-segment autonomous wheeled vehicle concept for use in Earth’s polar regions. SnoWorm is based on FrostyBoy, a four-wheeled GPS guided rover built for autonomous surveys across ice sheets. Data collected from FrostyBoy were used to ground-truth a ROS/Gazebo model of vehicle-terrain interaction for simulations on snow surfaces. The first mobility mode, inchworm movement, uses active prismatic joints that link the SnoWorm’s segments, and allow them to push and pull one another. This pushing and pulling of individual segments can be coordinated to allow forward motion through terrain that would immobilize a single-segment vehicle. The second mobility mode utilizes fixed links between SnoWorm’s segments and uses the tension or compression measured in these links as a variable to control wheel speeds and achieve a targeted force distributions within the multi-segment vehicle. This ability to control force distribution can be used to distribute a towed load evenly across the entire SnoWorm. Alternatively, the proportion of the load carried by individual segments can be increased or decreased as needed based on each segment’s available drawbar pull or wheel slip. 
    more » « less
  4. ; ; ; (, IEEE Systems Journal)
    The ongoing electrification of the transportation fleet will increase the load on the electric power grid. Since both the transportation network and the power grid already experience periods of significant stress, joint analyses of both infrastructures will most likely be necessary to ensure acceptable operation in the future. To enable such analyses, this article presents an open-source testbed that jointly simulates high-fidelity models of both the electric distribution system and the transportation network. The testbed utilizes two open-source simulators, OpenDSS to simulate the electric distribution system and the microscopic traffic simulator SUMO to simulate the traffic dynamics. Electric vehicle charging links the electric distribution system and the transportation network models at vehicle locations determined using publicly available parcel data. Leveraging high-fidelity synthetic electric distribution system data from the SMART-DS project and transportation system data from OpenStreetMap, this testbed models the city of Greensboro, NC down to the household level. Moreover, the methodology and the supporting scripts released with the testbed allow adaption to other areas where high-fidelity geolocated OpenDSS datasets are available. After describing the components and usage of the testbed, we exemplify applications enabled by the testbed via two scenarios modeling the extreme stresses encountered during evacuations. 
    more » « less
  5. ; ; ; (, IEEE systems journal)
    The ongoing electrification of the transportation fleet will increase the load on the electric power grid. Since both the transportation network and the power grid already experience periods of significant stress, joint analyses of both infrastructures will most likely be necessary to ensure acceptable operation in the future. To enable such analyses, this paper presents an open- source testbed that jointly simulates high-fidelity models of both the electric distribution system and the transportation network. The testbed utilizes two open-source simulators, OpenDSS to simulate the electric distribution system and the microscopic traffic simulator SUMO to simulate the traffic dynamics. Electric vehicle charging links the electric distribution system and the transportation network models at vehicle locations determined using publicly available parcel data. Leveraging high-fidelity synthetic electric distribution system data from the SMART-DS project and transportation system data from OpenStreetMap, this testbed models the city of Greensboro, NC down to the household level. Moreover, the methodology and the supporting scripts released with the testbed allow adaption to other areas where high-fidelity geolocated OpenDSS datasets are available. After describing the components and usage of the testbed, we exemplify applications enabled by the testbed via two scenarios modeling the extreme stresses encountered during evacuations. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email