An official website of the United States government
Abstract Tin monochalcogenides SnS and SnSe, belonging to a family of Van der Waals crystals isoelectronic to black phosphorus, are known as environmentally friendly materials promising for thermoelectric conversion applications. However, they exhibit other desired functionalities, such as intrinsic linear dichroism of the optical and electronic properties originating from strongly anisotropic orthorhombic crystal structures. This property makes them perfect candidates for polarization‐sensitive photodetectors working in near‐infrared spectral range. A comprehensive study of the SnS and SnSe crystals is presented, performed by means of optical spectroscopy and photoemission spectroscopy, supported by ab initio calculations. The studies reveal the high sensitivity of the optical response of both materials to the incident light polarization, which is interpreted in terms of the electronic band dispersion and orbital composition of the electronic bands, dictating the selection rules. From the photoemission investigation the ionization potential, electron affinity and work function are determined, which are parameters crucial for the design of devices based on semiconductor heterostructures.
more »
« less
Organic-based photodetectors for multiband spectral imaging
Using organic photodetectors for multispectral sensing is attractive due to their unique capabilities to tune spectral response, transmittance, and polarization sensitivity. Existing methods lack tandem multicolor detection and exhibit high spectral cross talk. We exploit the polarization sensitivity of organic photodetectors, together with birefringent optical filters to design single-pixel multispectral detectors that achieve high spectral selectivity and good radiometric performance. Two different architectures are explored and optimized, including the Solc-based and multitwist-retarder-based organic photodetectors. Although the former demonstrated a higher spectral resolution, the latter enables a more compact sensor as well as greater flexibility in device fabrication.
more »
« less
- Award ID(s):
- 1809753
- PAR ID:
- 10216689
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Applied Optics
- Volume:
- 60
- Issue:
- 8
- ISSN:
- 1559-128X; APOPAI
- Format(s):
- Medium: X Size: Article No. 2314
- Size(s):
- Article No. 2314
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Simultaneous spectral and polarimetric imaging enables versatile detection and multimodal characterization of targets of interest. Current architectures incorporate a 2×2 pixel arrangement to acquire the full linear polarimetric information causing spatial sampling artifacts. Additionally, they suffer from limited spectral selectivity and high color crosstalk. Here, we demonstrate a bio-inspired spectral and polarization sensor structure based on integrating semitransparent polarization-sensitive organic photovoltaics (P-OPVs) and liquid crystal polymer (LCP) retarders in a tandem configuration. Color tuning is realized by leveraging the dynamic chromatic retardation control of LCP films, while polarization sensitivity is realized by exploiting the flexible anisotropic properties of P-OPVs. The structure is marked by its ultra-thin design and its ability to detect spectral and polarimetric contents along the same optical axis, thereby overcoming the inherent limitations associated with conventional division-of-focal plane sensors.more » « less
-
Abstract Despite recent rapid advances in metal halide perovskites for use in optoelectronics, the fundamental understanding of the electrical‐poling‐induced ion migration, accounting for many unusual attributes and thus performance in perovskite‐based devices, remain comparatively elusive. Herein, the electrical‐poling‐promoted polarization potential is reported for rendering hybrid organic–inorganic perovskite photodetectors with high photocurrent and fast response time, displaying a tenfold enhancement in the photocurrent and a twofold decrease in the response time after an external electric field poling. First, a robust meniscus‐assisted solution‐printing strategy is employed to facilitate the oriented perovskite crystals over a large area. Subsequently, the electrical poling invokes the ion migration within perovskite crystals, thus inducing a polarization potential, as substantiated by the surface potential change assessed by Kelvin probe force microscopy. Such electrical‐poling‐induced polarization potential is responsible for the markedly enhanced photocurrent and largely shortened response time. This work presents new insights into the electrical‐poling‐triggered ion migration and, in turn, polarization potential as well as into the implication of the latter for optoelectronic devices with greater performance. As such, the utilization of ion‐migration‐produced polarization potential may represent an important endeavor toward a wide range of high‐performance perovskite‐based photodetectors, solar cells, transistors, scintillators, etc.more » « less
-
Abstract In this report, a high‐performance all‐polymer organic photodetector that is sensitive to linearly polarized light throughout the visible spectrum is demonstrated. The active layer is a bulk heterojunction composed of an electron donor polymer PBnDT‐FTAZ and acceptor polymer P(NDI2OD‐T2) that have complementary spectral absorption resulting in efficient detection from 350 to 800 nm. The blend film exhibits good ductility with the ability to accommodate large strains of over 60% without fracture. This allows the film to undergo large uniaxial strain resulting in in‐plane alignment of both polymers making the film optically anisotropic and intrinsically polarization sensitive. The films are characterized by UV–vis spectroscopy and grazing incidence wide‐angle X‐ray scattering showing that both polymers have similar in‐plane backbone alignment and maintain packing order after being strained. The films are integrated into devices and characterized under linear polarized light. The strain‐oriented detectors have maximum photocurrent anisotropies of 1.4 under transverse polarized light while maintaining peak responsivities of 0.21 A W−1and a 3 dB cutoff frequency of ≈1 kHz. The demonstrated performance is comparable to the current state of the art all‐polymer photodetectors with the added capability of polarization sensitivity enabling new application opportunities.more » « less
-
Abstract Photodetectors that can sense not only light intensity but also light's polarization state add valuable information that is beneficial in a wide array of applications. Polymer semiconductors are an attractive material system to achieve intrinsic polarization sensitivity due to their anisotropic optoelectronic properties. In this report, the thermomechanical properties of the polymer semiconductors PBnDT‐FTAZ and P(NDI2OD‐T2) are leveraged to realize bulk heterojunction (BHJ) films with record in‐plane alignment. Two polymer blends with distinct weight average molar masses (Mw) are considered and either a strain‐ or rub‐alignment process is applied to align the polymer blend films. Optimized processing yields films with dichroic ratios (DR) of over 11 for the highMwsystem and nearly 17 for the lowMwsystem. Incorporating the aligned films into photodetectors results in a polarized photocurrent ratio of 15.25 with corresponding anisotropy ratio of 0.88 at a wavelength of 530 nm, representing the highest reported photocurrent ratio for photodiodes that can operate in a self‐powered regime. The demonstrated performance showcases the ability of polymer semiconductors to achieve BHJ films with exceptional in‐plane polymer alignment, enabling high performance polarization sensitive photodetectors for incorporation into novel device architectures.more » « less
