The requirements of augmented signal contrast provided by nanoparticle tags in biosensor microscopy-based point-of-care technologies for cancer and infectious disease diagnostics can be addressed through metallo-dielectric nanoarchitectures that enhance optical scattering and absorption to provide digital resolution detection of single tags with simple instrumentation. Photonic Resonator Interferometric Scattering Microscopy (PRISM) enables label-free visualization of nanometer-scale analytes such as extracellular vesicles and virions, and its applicability can be extended to biomolecular analyte counting through nanoparticle tags. Here, we present template-free, linker-less cryosoret nano-assemblies fabricated via adiabatic cooling (−196 °C) as plasmonic nano-antennas that provide high scattering contrast in PRISM. Plasmonic Ag and Au nanomaterials and their cryosorets are evaluated through imaging experiments and simulations based on the finite element method to understand the photo-plasmonic coupling effect at the surface of a photonic crystal (PC) interface. The Ag and Au cryosorets provide at most 8.29-fold and 6.77-fold higher signal contrast compared to their singlet counterpart. Through the simulations, the averaged field magnitude enhancements of 2.77-fold and 3.68-fold are observed for Ag and Au cryosorets when interfacing with PCs compared to bare glass substrates. The hybrid coupling between the localized Mie and delocalized Bragg plasmons of cryosorets and the underlying PC's guided mode resonance provides insights for developing nano-assembly-based nano-tags for biosensing applications.
Interferometric scattering microscopy is increasingly employed in biomedical research owing to its extraordinary capability of detecting nano-objects individually through their intrinsic elastic scattering. To significantly improve the signal-to-noise ratio without increasing illumination intensity, we developed photonic resonator interferometric scattering microscopy (PRISM) in which a dielectric photonic crystal (PC) resonator is utilized as the sample substrate. The scattered light is amplified by the PC through resonant near-field enhancement, which then interferes with the <1% transmitted light to create a large intensity contrast. Importantly, the scattered photons assume the wavevectors delineated by PC’s photonic band structure, resulting in the ability to utilize a non-immersion objective without significant loss at illumination density as low as 25 W cm−2. An analytical model of the scattering process is discussed, followed by demonstration of virus and protein detection. The results showcase the promise of nanophotonic surfaces in the development of resonance-enhanced interferometric microscopies.
more » « less- Award ID(s):
- 2027778
- PAR ID:
- 10218027
- Publisher / Repository:
- Nature Publishing Group
- Date Published:
- Journal Name:
- Nature Communications
- Volume:
- 12
- Issue:
- 1
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
more » « less
Abstract Since its first demonstration over 100 years ago, scattering‐based light‐sheet microscopy has recently re‐emerged as a key modality in label‐free tissue imaging and cellular morphometry; however, scattering‐based light‐sheet imaging with subcellular resolution remains an unmet target. This is because related approaches inevitably superimpose speckle or granular intensity modulation on to the native subcellular features. Here, we addressed this challenge by deploying a time‐averaged pseudo‐thermalized light‐sheet illumination. While this approach increased the lateral dimensions of the illumination sheet, we achieved subcellular resolving power after image deconvolution. We validated this approach by imaging cytosolic carbon depots in yeast and bacteria with increased specificity, no staining, and ultralow irradiance levels. Overall, we expect this scattering‐based light‐sheet microscopy approach will advance single, live cell imaging by conferring low‐irradiance and label‐free operation towards eradicating phototoxicity.
-
more » « less
Reflection phase imaging provides label-free, high-resolution characterization of biological samples, typically using interferometric-based techniques. Here, we investigate reflection phase microscopy from
intensity -only measurements under diverse illumination. We evaluate the forward and inverse scattering model based on the first Born approximation for imaging scattering objects above a glass slide. Under this design, the measured field combineslinear forward-scattering and height-dependentnonlinear back-scattering from the object that complicates object phase recovery. Using only the forward-scattering, we derive a linear inverse scattering model and evaluate this model’s validity range in simulation and experiment using a standard reflection microscope modified with a programmable light source. Our method provides enhanced contrast of thin, weakly scattering samples that complement transmission techniques. This model provides a promising development for creating simplified intensity-based reflection quantitative phase imaging systems easily adoptable for biological research. -
more » « less
We report the design, development, and characterization of a miniaturized version of the photonic resonator absorption microscope (PRAM Mini), whose cost, size, and functionality are compatible with point-of-care (POC) diagnostic assay applications. Compared to previously reported versions of the PRAM instrument, the PRAM Mini components are integrated within an optical framework comprised of an acrylic breadboard and plastic alignment fixtures. The instrument incorporates a Raspberry Pi microprocessor and Bluetooth communication circuit board for wireless control and data connection to a linked smartphone. PRAM takes advantage of enhanced optical absorption of ∼80 nm diameter gold nanoparticles (AuNP) whose localized surface plasmon resonance overlaps with the ∼625 nm resonant reflection wavelength of a photonic crystal (PC) surface. When illuminated with wide-field low-intensity collimated light from a ∼617 nm wavelength red LED, each AuNP linked to the PC surface results in locally reduced reflection intensity, which is visualized by observing dark spots in the PC-reflected image with an inexpensive CMOS image sensor. Each AuNP in the image field of view can be easily counted with digital resolution. We report upon the selection of optical/electronic components, image processing algorithm, and contrast achieved for single AuNP detection. The instrument is operated via a wireless connection to a linked mobile device using a custom-developed software application that runs on an Android smartphone. As a representative POC application, we used the PRAM Mini as the detection instrument for an assay that measures the presence of antibodies against SARS-CoV-2 infection in cat serum samples, where each dark spot in the image represents a complex between one immobilized viral antigen, one antibody molecule, and one AuNP tag. With dimensions of 23 × 21 × 10 cm3, the PRAM Mini offers a compact detection instrument for POC diagnostics.
-
García-Blanco, Sonia M. ; Cheben, Pavel (Ed.)Diverse chip-based sensors utilizing integrated silicon photonics have been demonstrated in resonator and phase shifter/interferometer configurations. Till date, interferometric techniques with the Mach-Zehnder Interferometer (MZI) and Young’s interferometer have shown the lowest mass detection limits (in pg/mm2). Slow light in photonic crystal waveguides integrated with MZIs enables compact geometries due to enhanced optical path lengths as light propagates with high group index. In a typical MZI, light propagating in the signal arm overlaps with analytes and undergo a relative phase change with respect to the light in the reference arm which leads to measured output intensity changes. In this paper, using integrated photonic methods, we demonstrate a slow light enhanced Michelson interferometer (MI) biosensor, wherein the reference and signal arms are traversed twice by the propagating optical mode. As a result, the analyte interaction length is effectively doubled since the propagating optical mode undergoes twice the phase shift as would be observed in a MZI. In an asymmetric MI configuration, the resultant doubling of the phase shift is observed as a doubling of the resonance wavelength shift for a fixed change in the analyte concentration. The device sensitivity is thus doubled with respect to a conventional MZI while also effectively halving the geometric length compared to the MZI sensormore » « less
