Tucker decomposition is one of the SOTA CNN model compression techniques. However, unlike the FLOPs reduction, we observe very limited inference time reduction with Tucker-compressed models using existing GPU software such as cuDNN. To this end, we propose an efficient end-to-end framework that can generate highly accurate and compact CNN models via Tucker decomposition and optimized inference code on GPUs. Specifically, we propose an ADMM-based training algorithm that can achieve highly accurate Tucker-format models. We also develop a high-performance kernel for Tucker-format convolutions and analytical performance models to guide the selection of execution parameters. We further propose a co-design framework to determine the proper Tucker ranks driven by practical inference time (rather than FLOPs). Our evaluation on five modern CNNs with A100 demonstrates that our compressed models with our optimized code achieve up to 2.21× speedup over cuDNN, 1.12× speedup over TVM, and 3.27× over the original models using cuDNN with at most 0.05% accuracy loss.
more »
« less
ClickTrain: Efficient and Accurate End-to-End Deep Learning Training via Fine-Grained Architecture-Preserving Pruning
Convolutional neural networks (CNNs) are becoming increasingly deeper, wider, and non-linear because of the growing demand on prediction accuracy and analysis quality. The wide and deep CNNs, however, require a large amount of computing resources and processing time. Many previous works have studied model pruning to improve inference performance, but little work has been done for effectively reducing training cost. In this paper, we propose ClickTrain: an efficient and accurate end-to-end training and pruning framework for CNNs. Different from the existing pruning-during-training work, ClickTrain provides higher model accuracy and compression ratio via fine-grained architecture-preserving pruning. By leveraging pattern-based pruning with our proposed novel accurate weight importance estimation, dynamic pattern generation and selection, and compiler-assisted computation optimizations, ClickTrain generates highly accurate and fast pruned CNN models for direct deployment without any extra time overhead, compared with the baseline training. ClickTrain also reduces the end-to-end time cost of the pruning-after-training method by up to 2.3X with comparable accuracy and compression ratio. Moreover, compared with the state-of-the-art pruning-during-training approach, ClickTrain provides significant improvements both accuracy and compression ratio on the tested CNN models and datasets, under similar limited training time.
more »
« less
- NSF-PAR ID:
- 10219840
- Date Published:
- Journal Name:
- The 35th ACM International Conference on Supercomputing (ICS 2021)
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Recurrent Neural Networks (RNNs) are becoming increasingly important for time series-related applications which require efficient and real-time implementations. The two major types are Long Short-Term Memory (LSTM) and Gated Recurrent Unit (GRU) networks. It is a challenging task to have real-time, efficient, and accurate hardware RNN implementations because of the high sensitivity to imprecision accumulation and the requirement of special activation function implementations. Recently two works have focused on FPGA implementation of inference phase of LSTM RNNs with model compression. First, ESE uses a weight pruning based compressed RNN model but suffers from irregular network structure after pruning. The second work C-LSTM mitigates the irregular network limitation by incorporating block-circulant matrices for weight matrix representation in RNNs, thereby achieving simultaneous model compression and acceleration. A key limitation of the prior works is the lack of a systematic design optimization framework of RNN model and hardware implementations, especially when the block size (or compression ratio) should be jointly optimized with RNN type, layer size, etc. In this paper, we adopt the block-circulant matrixbased framework, and present the Efficient RNN (E-RNN) framework for FPGA implementations of the Automatic Speech Recognition (ASR) application. The overall goal is to improve performance/energy efficiency under accuracy requirement. We use the alternating direction method of multipliers (ADMM) technique for more accurate block-circulant training, and present two design explorations providing guidance on block size and reducing RNN training trials. Based on the two observations, we decompose E-RNN in two phases: Phase I on determining RNN model to reduce computation and storage subject to accuracy requirement, and Phase II on hardware implementations given RNN model, including processing element design/optimization, quantization, activation implementation, etc. 1 Experimental results on actual FPGA deployments show that E-RNN achieves a maximum energy efficiency improvement of 37.4× compared with ESE, and more than 2× compared with C-LSTM, under the same accuracy.more » « less
-
more » « less
Network pruning is a widely used technique to reduce computation cost and model size for deep neural networks. However, the typical three-stage pipeline (i.e., training, pruning, and retraining (fine-tuning)) significantly increases the overall training time. In this article, we develop a systematic weight-pruning optimization approach based on surrogate Lagrangian relaxation (SLR), which is tailored to overcome difficulties caused by the discrete nature of the weight-pruning problem. We further prove that our method ensures fast convergence of the model compression problem, and the convergence of the SLR is accelerated by using quadratic penalties. Model parameters obtained by SLR during the training phase are much closer to their optimal values as compared to those obtained by other state-of-the-art methods. We evaluate our method on image classification tasks using CIFAR-10 and ImageNet with state-of-the-art multi-layer perceptron based networks such as MLP-Mixer; attention-based networks such as Swin Transformer; and convolutional neural network based models such as VGG-16, ResNet-18, ResNet-50, ResNet-110, and MobileNetV2. We also evaluate object detection and segmentation tasks on COCO, the KITTI benchmark, and the TuSimple lane detection dataset using a variety of models. Experimental results demonstrate that our SLR-based weight-pruning optimization approach achieves a higher compression rate than state-of-the-art methods under the same accuracy requirement and also can achieve higher accuracy under the same compression rate requirement. Under classification tasks, our SLR approach converges to the desired accuracy × faster on both of the datasets. Under object detection and segmentation tasks, SLR also converges 2× faster to the desired accuracy. Further, our SLR achieves high model accuracy even at the hardpruning stage without retraining, which reduces the traditional three-stage pruning into a two-stage process. Given a limited budget of retraining epochs, our approach quickly recovers the model’s accuracy.
-
End-to-end data-driven image compressive sensing reconstruction (EDCSR) frameworks achieve state-of-the-art reconstruction performance in terms of reconstruction speed and accuracy. However, due to their end-to-end nature, existing EDCSR frameworks can not adapt to a variable compression ratio (CR). For applications that desire a variable CR, existing EDCSR frameworks must be trained from scratch at each CR, which is computationally costly and time-consuming. This paper presents a generic compression ratio adapter (CRA) framework that addresses the variable compression ratio (CR) problem for existing EDCSR frameworks with no modification to given reconstruction models nor enormous rounds of training needed. CRA exploits an initial reconstruction network to generate an initial estimate of reconstruction results based on a small portion of the acquired measurements. Subsequently, CRA approximates full measurements for the main reconstruction network by complementing the sensed measurements with resensed initial estimate. Our experiments based on two public image datasets (CIFAR10 and Set5) show that CRA provides an average of 13.02 dB and 5.38 dB PSNR improvement across the CRs from 5 to 30 over a naive zero-padding approach and the AdaptiveNN approach(a prior work), respectively. CRA addresses the fixed-CR limitation of existing EDCSR frameworks and makes them suitable for resource-constrained compressive sensing applications.more » « less
-
null (Ed.)The ever-growing parameter size and computation cost of Convolutional Neural Network (CNN) models hinder their deployment onto resource-constrained platforms. Network pruning techniques are proposed to remove the redundancy in CNN parameters and produce a sparse model. Sparse-aware accelerators are also proposed to reduce the computation cost and memory bandwidth requirements of inference by leveraging the model sparsity. The irregularity of sparse patterns, however, limits the efficiency of those designs. Researchers proposed to address this issue by creating a regular sparsity pattern through hardware-aware pruning algorithms. However, the pruning rate of these solutions is largely limited by the enforced sparsity patterns. This limitation motivates us to explore other compression methods beyond pruning. With two decoupled computation stages, we found that kernel decomposition could potentially take the processing of the sparse pattern off from the critical path of inference and achieve a high compression ratio without enforcing the sparse patterns. To exploit these advantages, we propose ESCALATE, an algorithm-hardware co-design approach based on kernel decomposition. At algorithm level, ESCALATE reorganizes the two computation stages of the decomposed convolution to enable a stream processing of the intermediate feature map. We proposed a hybrid quantization to exploit the different reuse frequency of each part of the decomposed weight. At architecture level, ESCALATE proposes a novel ‘Basis-First’ dataflow and its corresponding microarchitecture design to maximize the benefits brought by the decomposed convolution.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1145/3447818.3459988
