skip to main content

Explore Research Products in the NSF-PAR

Title: Dynamically Reconfigurable Discrete Distributed Stiffness for Inflated Beam Robots
Inflated continuum robots are promising for a variety of navigation tasks, but controlling their motion with a small number of actuators is challenging. These inflated beam robots tend to buckle under compressive loads, producing extremely tight local curvature at difficult-to-control buckle point locations. In this paper, we present an inflated beam robot that uses distributed stiffness changing sections enabled by positive pressure layer jamming to control or prevent buckling. Passive valves are actuated by an electromagnet carried by an electromechanical device that travels inside the main inflated beam robot body. The valves themselves require no external connections or wiring, allowing the distributed stiffness control to be scaled to long beam lengths. Multiple layer jamming elements are stiffened simultaneously to achieve global stiffening, allowing the robot to support greater cantilevered loads and longer unsupported lengths. Local stiffening, achieved by leaving certain layer jamming elements unstiffened, allows the robot to produce "virtual joints" that dynamically change the robot kinematics. Implementing these stiffening strategies is compatible with growth through tip eversion and tendon steering, and enables a number of new capabilities for inflated beam robots and tip-everting robots.  more » « less
Award ID(s):
1637446
NSF-PAR ID:
10221274
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
IEEE International Conference on Robotics and Automation (ICRA)
Page Range / eLocation ID:
9050 to 9056
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ( , 2020 3rd IEEE International Conference on Soft Robotics (RoboSoft))
    null (Ed.)
    Jamming is a phenomenon in which a collectionof compliant elements is encased in an airtight envelope, anda vacuum-induced pressure enhances frictional and kinematiccoupling, resulting in dramatic changes in stiffness. This paperintroduces the jamming of square cross-sectioned fibers, whichallow for tunable and programmable anisotropic stiffness. Atheoretical model captures the effect of major geometric designparameters on the direction-variant bending stiffness of theselong and slender jamming elements. The model is experimen-tally validated, and a 13-fold stiffening in one direction anda 22-fold stiffening in the orthogonal direction is achievedwith a single jamming element. The performance of a square-fiber-jamming continuum robot structure is demonstrated in asteering task, with an average reduction of 74% in the measuredinsertion force when unjammed, and a direction-variant 53%or 100% increase in the measured tip stiffness when jammed. 
    more » « less
  2. ; ; ( , Journal of Mechanisms and Robotics)
    Abstract Continuous layer jamming is an effective tunable stiffness mechanism that utilizes vacuum to vary friction between laminates enclosed in a membrane. In this paper, we present a discrete layer jamming mechanism that is composed of a multilayered beam and multiple variable pressure clamps placed discretely along the beam; system stiffness can be varied by changing the pressure applied by the clamps. In comparison to continuous layer jamming, discrete layer jamming is simpler as it can be implemented with dynamic variable pressure actuators for faster control, better portability, and no sealing issues due to no need for an air supply. Design and experiments show that discrete layer jamming can be used for a variable stiffness co-robot arm. The concept is validated by quasi-static cantilever bending experiments. The measurements show that clamping 10% of the beam area with two clamps increases the bending stiffness by around 17 times when increasing the clamping pressure from 0 to 3 MPa. Computational case studies using finite element analysis for the five key parameters are presented, including clamp location, clamp width, number of laminates, friction coefficient, and number of clamps. Clamp location, number of clamps, and number of laminates are found to be most useful for optimizing a discrete layer jamming design. Actuation requirements for a variable pressure clamp are presented based on results from laminate beam compression tests. 
    more » « less
  3. ; ( , International Journal of Damage Mechanics)

    The inclusion-based boundary element method (iBEM) is developed to calculate the elastic fields of a bi-layered composite with inhomogeneities in one layer. The bi-material Green’s function has been applied to obtain the elastic field caused by the domain integral of the source fields on inclusions and the boundary integral of the applied loads on the surface. Using Eshelby’s equivalent inclusion method (EIM), the material mismatch between the particle and matrix phases is simulated with a continuously distributed source field, namely eigenstrain, on inhomogeneities so that the iBEM can calculate the local field. The stress singularity along the interface leads to the delamination of the bimaterials under a certain load. The crack’s energy release rate (  J) is obtained through the J-integral, which predicts the stability of the delamination. When the stiffness of one layer increases, the J-integral increases with a higher gradient, leading to lower stability. Particularly, the effect of the boundary and inhomogeneity on the J-integral is illustrated by changing the crack length and inhomogeneity configuration, which shows the crack is stable at the beginning stage and becomes unstable when the crack tip approaches the boundary; a stiffer inhomogeneity in the neighborhood of a crack tip decreases J and improves the fracture resistance. For the stable cracking phase, the J-integral increases with the volume fraction of inhomogeneity are evaluated. The model is applied to a dual-glass solar module with air bubbles in the encapsulant layer. The stress distribution is evaluated with the iBEM, and the J-integral is evaluated to predict the delamination process with the energy release rate, which shows that the bubbles significantly increase the J-integral. The effect of the bubble size, location, and number on the J-integral is also investigated. The present method provides a powerful tool for the design and analysis of layered materials and structures.

     
    more » « less
  4. ; ; ; ; ( , Journal of Mechanisms and Robotics)
    Abstract Soft robots can undergo large elastic deformations and adapt to complex shapes. However, they lack the structural strength to withstand external loads due to the intrinsic compliance of fabrication materials (silicone or rubber). In this paper, we present a novel stiffness modulation approach that controls the robot’s stiffness on-demand without permanently affecting the intrinsic compliance of the elastomeric body. Inspired by concentric tube robots, this approach uses a Nitinol tube as the backbone, which can be slid in and out of the soft robot body to achieve robot pose or stiffness modulation. To validate the proposed idea, we fabricated a tendon-driven concentric tube (TDCT) soft robot and developed the model based on Cosserat rod theory. The model is validated in different scenarios by varying the joint-space tendon input and task-space external contact force. Experimental results indicate that the model is capable of estimating the shape of the TDCT soft robot with an average root-mean-square error (RMSE) of 0.90 (0.56% of total length) mm and average tip error of 1.49 (0.93% of total length) mm. Simulation studies demonstrate that the Nitinol backbone insertion can enhance the kinematic workspace and reduce the compliance of the TDCT soft robot by 57.7%. Two case studies (object manipulation and soft laparoscopic photodynamic therapy) are presented to demonstrate the potential application of the proposed design. 
    more » « less
  5. ; ; ; ; ( , Biomimetics)
    Soft-bodied animals, such as earthworms, are capable of contorting their body to squeeze through narrow spaces, create or enlarge burrows, and move on uneven ground. In many applications such as search and rescue, inspection of pipes and medical procedures, it may be useful to have a hollow-bodied robot with skin separating inside and outside. Textiles can be key to such skins. Inspired by earthworms, we developed two new robots: FabricWorm and MiniFabricWorm. We explored the application of fabric in soft robotics and how textile can be integrated along with other structural elements, such as three-dimensional (3D) printed parts, linear springs, and flexible nylon tubes. The structure of FabricWorm consists of one third the number of rigid pieces as compared to its predecessor Compliant Modular Mesh Worm-Steering (CMMWorm-S), while the structure of MiniFabricWorm consists of no rigid components. This article presents the design of such a mesh and its limitations in terms of structural softness. We experimentally measured the stiffness properties of these robots and compared them directly to its predecessors. FabricWorm and MiniFabricWorm are capable of peristaltic locomotion with a maximum speed of 33 cm/min (0.49 body-lengths/min) and 13.8 cm/min (0.25 body-lengths/min), respectively. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email