skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Synthesis and optoelectronic properties of ultrathin Ga 2 O 3 nanowires
Gallium oxide (Ga 2 O 3 ) and its most stable modification, monoclinic β-Ga 2 O 3 , is emerging as a primary material for power electronic devices, gas sensors and optical devices due to a high breakdown voltage, large bandgap, and optical transparency combined with electrical conductivity. Growth of β-Ga 2 O 3 is challenging and most methods require very high temperatures. Nanowires of β-Ga 2 O 3 have been investigated extensively as they might be advantageous for devices such as nanowire field effect transistors, and gas sensors benefiting from a large surface to volume ratio, among others. Here, we report a synthesis approach using a sulfide precursor (Ga 2 S 3 ), which requires relatively low substrate temperatures and short growth times to produce high-quality single crystalline β-Ga 2 O 3 nanowires in high yields. Even though Au- or Ag-rich nanoparticles are invariably observed at the nanowire tips, they merely serve as nucleation seeds while the nanowire growth proceeds via supply and local oxidation of gallium at the substrate interface. Absorption and cathodoluminescence spectroscopy on individual nanowires confirms a wide bandgap of 4.63 eV and strong luminescence with a maximum ∼2.7 eV. Determining the growth process, morphology, composition and optoelectronic properties on the single nanowire level is key to further application of the β-Ga 2 O 3 nanowires in electronic devices.  more » « less
Award ID(s):
1904843
PAR ID:
10231056
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Journal of Materials Chemistry C
Volume:
8
Issue:
33
ISSN:
2050-7526
Page Range / eLocation ID:
11555 to 11562
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Advanced Materials Technologies)
    Abstract Beta gallium oxide (β‐Ga2O3) has emerged as a highly promising semiconductor material with an ultrawide bandgap ranging from 4.5 to 4.9 eV for future applications in power electronics, optoelectronics, as well as gas and ultraviolet (UV) radiation sensors. Here, surface adsorption and air damping behavior of doubly clamped β‐Ga2O3nanomechanical resonators are probed and systemically studied by measuring the resonance characteristics under different gas and pressure conditions. High responsivities of resonance to pressure are obtained by heating the devices up to 300 °C to induce an accelerated adsorption–desorption process. The initial surface conditions of the β‐Ga2O3thin film play important roles in affecting the resonant behavior. UV ozone treatment proves effective in altering the initial surface conditions of β‐Ga2O3nanosheets by eliminating physisorbed contaminants and filling oxygen vacancy defects residing on the surface, resulting in a consequential and discernible modification of the resonance behavior of β‐Ga2O3nanomechanical resonators. The surface adsorption and desorption processes in β‐Ga2O3demonstrate clear reversibility by exposing the UV treated β‐Ga2O3to air. This study attains first‐hand information on how the surface conditions of β‐Ga2O3affect its mechanical properties, and helps guide future development of transducers via β‐Ga2O3nanoelectromechanical systems (NEMS) for pressure sensing applications, especially in harsh environments. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, AIP Advances)
    The hot-wall metalorganic chemical vapor deposition (MOCVD) concept, previously shown to enable superior material quality and high performance devices based on wide bandgap semiconductors, such as Ga(Al)N and SiC, has been applied to the epitaxial growth of β-Ga 2 O 3 . Epitaxial β-Ga 2 O 3 layers at high growth rates (above 1 μm/h), at low reagent flows, and at reduced growth temperatures (740 °C) are demonstrated. A high crystalline quality epitaxial material on a c-plane sapphire substrate is attained as corroborated by a combination of x-ray diffraction, high-resolution scanning transmission electron microscopy, and spectroscopic ellipsometry measurements. The hot-wall MOCVD process is transferred to homoepitaxy, and single-crystalline homoepitaxial β-Ga 2 O 3 layers are demonstrated with a [Formula: see text]01 rocking curve width of 118 arc sec, which is comparable to those of the edge-defined film-fed grown ([Formula: see text]01) β-Ga 2 O 3 substrates, indicative of similar dislocation densities for epilayers and substrates. Hence, hot-wall MOCVD is proposed as a prospective growth method to be further explored for the fabrication of β-Ga 2 O 3 . 
    more » « less
  3. ; ; ; ; ; (, physica status solidi (a))
    Gallium oxide (Ga2O3) is a highly promising ultrawide‐bandgap semiconductor for power electronics that emerged about a decade ago. Epitaxial growth Ga2O3at the small scale is demonstrated. In order to develop scalable manufacturing of high‐performance epitaxial structures, in‐depth understanding of the fundamental growth processes, control parameters, and mechanism is imperative. This review discusses the recent progress in epitaxial growth of β‐Ga2O3films and highlights challenges in obtaining high growth rate, low defects, and high carrier mobilities. Compared with the other epitaxy methods, metal–organic chemical vapor deposition (MOCVD) offers a wider growth window and precursor selection option, to minimize the tradeoff between crystal quality and growth rate. Growth rate is inversely proportional to temperature, within a certain temperature window, because of the unavoidable premature gas‐phase reactions and desorption of the highly volatile gallium suboxide (Ga2O) at elevated temperatures. Growth defects, background impurity incorporation, and carrier mobilities can be affected by the choice of MOCVD precursors, nucleation, and adsorption/desorption/diffusion of adatoms on substrate surfaces of different orientations, including the effect of growing on cleavage and noncleavage planes. This review summarizes the current status of the epitaxial growth of β‐Ga2O3and analyzes the major factors that enhance mobility and reduce background doping concentration. The insights gained help advance the manufacturability of device‐grade epitaxial thin films. 
    more » « less
  4. ; ; ; ; (, Journal of Vacuum Science & Technology A)
    Gallium oxide (β-Ga 2 O 3 ) is becoming a popular material for high power electronic devices due to its wide bandgap and ease of processing. In this work, β-Ga 2 O 3 substrates received various annealing treatments before atomic layer deposition of HfO 2 and subsequent fabrication of metal–oxide–semiconductor (MOS) capacitors. Annealing of β-Ga 2 O 3 with forming gas or nitrogen produced degraded capacitance–voltage (C–V) behavior compared to a β-Ga 2 O 3 control sample with no annealing. A sample annealed with pure oxygen had improved C–V characteristics relative to the control sample, with a higher maximum capacitance and smaller flat-band voltage shift, indicating that oxygen annealing improved the C–V behavior. X-ray photoelectron spectroscopy also suggested a reduction in the oxygen vacancy concentration after O 2 annealing at 450 °C, which supports the improved C–V characteristics and indicates that O 2 annealing of β-Ga 2 O 3 may lead to better MOS device performance. 
    more » « less
  5. ; ; ; ; (, Scientific Reports)
    null (Ed.)
    Abstract Monoclinic gallium oxide (β-Ga 2 O 3 ) is attracting intense focus as a material for power electronics, thanks to its ultra-wide bandgap (4.5–4.8 eV) and ability to be easily doped n -type. Because the holes self-trap, the band-edge luminescence is weak; hence, β-Ga 2 O 3 has not been regarded as a promising material for light emission. In this work, optical and structural imaging methods revealed the presence of localized surface defects that emit in the near-UV (3.27 eV, 380 nm) when excited by sub-bandgap light. The PL emission of these centers is extremely bright—50 times brighter than that of single-crystal ZnO, a direct-gap semiconductor that has been touted as an active material for UV devices. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email