skip to main content

Explore Research Products in the NSF-PAR

Title: Systems Architecture and Conceptual Design of a CubeSat Formation Serving as a Distributed Telescope
The Virtual Super-Resolution Optics with Reconfigurable Swarms (VISORS) mission is a multi-CubeSat distributed telescope which will image the solar corona to investigate the existence of underlying energy release mechanisms. Such a task requires angular resolutions of less than 0.2 arc-seconds in extreme ultraviolet, which cannot be economically done with a conventional space telescope. Performing such a mission requires unprecedented relative navigation tolerances, a need for active collision avoidance, a development of inter-satellite communication, and a propulsion system that enables the relative navigation maneuvers. The mission was initially conceived as a three 3U satellite formation in the NSF CubeSat Innovations Ideas Lab to address NSF science goals with innovative technologies. Once beginning conceptual subsystem design, it was evident that significant constraints linked to the three 3U satellite formation configuration limit the likelihood of mission success and increase mission risk. A trade study was conducted to determine potential resolutions to the problems associated with the initial three 3U satellite formation configuration. The completion of the trade study resulted in a major design change to a two 6U satellite configuration that resolved the issues associated with the initial configuration, improved mission success while reducing risk, and intends to incorporate novel CubeSat technologies, all of which enable the mission to move forward. This paper discusses the path that led the team to conduct the trade study, the design alternatives considered, and the innovative subsystem technologies that were conceived as a result of updating the satellite formation configuration.  more » « less
Award ID(s):
1936576
NSF-PAR ID:
10233976
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
ASCEND 2020
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ( , AIAA Scitech 2021 Forum)
    null (Ed.)
    This paper presents the preliminary system design of the Virtual Super-resolution Optics with Reconfigurable Swarms (VISORS) mission, a multi-CubeSat distributed telescope which will image the solar corona to investigate the existence of underlying energy release mechanisms. VISORS was conceived in the National Science Foundation (NSF) CubeSat Innovations Ideas Lab Workshop held in 2019 to address NSF science goals with innovative technologies. This mission will gather imagery that directly pertains to theories of coronal heating. In the paper, novel technologies are described that enable the VISORS mission to meet its challenging requirements and achieve the mission and science goals. The VISORS formation is composed of two 6U CubeSats that fly 40 meters apart during science imaging as a distributed space telescope, with the lead spacecraft containing the optics and the trailing spacecraft containing the detector. An orbit maneuver planner utilizes GNSS carrier-phase measurements to provide a high-precision navigation solution, and a series of ceramic antenna arrays employ a novel 5.8 GHz inter-satellite crosslink. A 3 degrees-of-freedom (3DOF) propulsion system provides the capability for formation adjustments and active collision avoidance. The remaining spacecraft functions are handled by a spacecraft bus supplied by a commercial vendor, and the system integration is conducted by the VISORS mission team. Careful analysis of the system design and concept of operations led to the development of a safety plan which significantly reduces the risk of collision in a large subset of off-nominal scenarios. With a completed preliminary design review in Q4 2020 and a projected launch date in late 2023, this collaboration among 10 different universities, NASA, and a commercial partner is an upcoming mission that will demonstrate a new assembly of highly equipped CubeSats and their ability to conduct a state-of-the-art science mission in a cost and time effective manner. 
    more » « less
  2. ( , AIAA SCITECH 2022 Forum)
    With space more accessible than ever, academic institutions like the University of Colorado (CU) Boulder have exhibited that CubeSats (compact, homogeneous, rectangular satellites with masses below 14 [kg]) can be leveraged for remarkable space missions capable of making significant advances to both scientific and technological fields. One such CubeSat project is the NSF-funded Space Weather Atmospheric Reconfigurable Multiscale Experiment (SWARM-EX), which will launch three 3U CubeSats into a “swarm” that will demonstrate autonomous formation flying capabilities while simultaneously studying the spatial and temporal variability of ion-neutral interactions in the equatorial Ionosphere-Thermosphere region. Although the small stature of CubeSats and their standardized deployer options help to lower unit development cost and facilitate launch opportunities, the physical size limits of CubeSats prove to be a double-edged sword vis-à-vis sustaining a stable power state while hosting instruments with high power demands and often strict pointing requirements. For SWARM-EX, this issue is magnified by the mission’s ambitious goals; to comply with mission requirements, a SWARM-EX spacecraft is required to concurrently (1) point the science instruments no more than 30° off ram when they are operational, (2) point the GNSS patch antenna no more than 30° off zenith when the spacecraft are separated by ≤ 10 [km], (3) point the X-Band patch antenna no more than 18° off boresight from the ground station during downlink, (4) maximize the differential ballistic coefficient during differential drag maneuvers, and (5) maximize solar array power generation at all times. Consequently, advanced CubeSat Missions like SWARM-EX require innovative systems engineering solutions to remain power-positive during on-orbit operations. Through a combination of intricate pointing profiles, orbital simulations, a comprehensive and coordinated ConOps, battery state of charge simulation tools, and expertise from previous CubeSat missions, the SWARM-EX team has conceived a plan to successfully meet all these mission requirements; it is the aim of the authors to illuminate these strategies as a case study. 
    more » « less
  3. ; ; ; ( , Water Resources Research)
    Abstract

    Conventional satellite platforms are limited in their ability to monitor rivers at fine spatial and temporal scales: suffering from unavoidable trade‐offs between spatial and temporal resolutions. CubeSat constellations, however, can provide global data at high spatial and temporal resolutions, albeit with reduced spectral information. This study provides a first assessment of using CubeSat data for river discharge estimation in both gauged and ungauged settings. Discharge was estimated for 11 Arctic rivers with sizes ranging from 16 to >1,000 m wide using the Bayesian at‐many‐stations hydraulic geometry‐Manning algorithm (BAM). BAM‐at‐many‐stations hydraulic geometry solves for hydraulic geometry parameters to estimate flow and requires only river widths as input. Widths were retrieved from Landsat 8 and Sentinel‐2 data sets and a CubeSat (the Planet company) data set, as well as their fusions. Results show satellite data fusion improves discharge estimation for both large (>100 m wide) and medium (40–100 m wide) rivers by increasing the number of days with a discharge estimation by a factor of 2–6 without reducing accuracy. Narrow rivers (<40 m wide) are too small for Landsat and Sentinel‐2 data sets, and their discharge is also not well estimated using CubeSat data alone, likely because the four‐band sensor cannot resolve water surfaces accurately enough. BAM technique outperforms space‐based rating curves when gauge data are available, and its accuracy is acceptable when no gauge data are present (instead relying on global reanalysis for discharge priors). Ultimately, we conclude that the data fusion presented here is a viable approach toward improving discharge estimates in the Arctic, even in ungauged basins.

     
    more » « less
  4. ( , 35th Annual Small Satellite Conference)
    The Space Weather Atmospheric Reconfigurable Multiscale Experiment (SWARM-EX) is a National Science Foundation (NSF) sponsored CubeSat mission distributed across six colleges and universities in the United States. The project has three primary goals: (1) contributing to aeronomy and space weather knowledge, (2) demonstrating novel engineering technology, and (3) advancing higher education. The scientific focus of SWARM-EX is to study the spatial and temporal variability of ion-neutral interactions in the equatorial Ionosphere-Thermosphere (I-T) region. Since the mission consists of three spacecraft operating in a swarm, SWARM-EX will take in-situ measurements of the neutral and ion composition on timescales of less than an orbital period to study the persistence and correlation between different phenomena in the I-T region. The engineering objectives of SWARM-EX are focused on advancing the state of the art in spacecraft formation flying. In addition to being the first passively safe, autonomous formation of more than two spacecraft, SWARM-EX will demonstrate several other key innovations. These include a novel hybrid propulsive/differential drag control scheme and the realization of a distributed aeronomy sensor. As a project selected by the NSF for its broader impacts as well as its intellectual merit, SWARM-EX aims to use CubeSat development as a vehicle for education. The six collaborating institutions have varying levels of CubeSat experience and involve students who range from first-year undergraduates to Ph.D. candidates. These differences in knowledge, as well as the distributed nature of the program, present a tremendous educational opportunity, but also raise challenges such as cross-institutional communication and coordination, document sharing and file management, and hardware development. By detailing its procedures for overcoming these challenges, the SWARM-EX team believes that it may serve as a case study for the coordination of a successful CubeSat program distributed across multiple institutions. 
    more » « less
  5. ; ; ( , AIAA Scitech 2021 Forum)
    null (Ed.)
    The VIrtual Super Optics Reconfigurable Swarm (VISORS) mission is a distributed telescope consisting of two 6U CubeSats separated by forty meters that will obtain high-resolution images of active solar regions in the extreme ultraviolet spectrum. This mission is challenging because the CubeSats must autonomously control their relative motion with unprecedented accuracy while operating in close proximity. This paper presents three contributions that enable the VISORS mission to meet its challenging requirements. First, passively safe absolute and relative orbit designs for distributed telescopes that provide regular periods of alignment with inertial targets are developed using relative eccentricity/inclination vector separation. Second, a guidance, navigation, and control system design is proposed to meet the demanding relative motion control requirements. Third, a concept of operations is proposed that minimizes mission operations load when the formation is not actively performing observations. This concept of operations includes a safety plan to address on-orbit anomalies. The performance of the guidance, navigation, and control system is validated through Monte Carlo simulations including all significant error sources and operational constraints. These simulations show that the mission requirements are met with margin, providing a preliminary demonstration of the feasibility of accurate autonomous formation control with CubeSats. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email