skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Mesoporous Silica Supported Perovskite Oxides for Low Temperature Thermochemical CO 2 Conversion
Abstract In this study, high yields of CO are reported from CO2using the silica (SiO2) supported perovskite oxide, La0.75Sr0.25FeO3(LSF), composites in the reverse water gas shift chemical looping (RWGS‐CL) process. XRD patterns of materials formed upon adding SBA‐15 to the perovskite sol‐gel precursor solution indicated successful formation of an orthorhombic perovskite oxide structure in the composites. The total surface area increased by ∼300 % with the addition of 50 % LSF to SBA‐15 by mass and surface accessibility of perovskite oxide crystallites was verified by CO2chemisorption and XPS measurements. Composite materials achieved up to a factor of 10 increases in CO yields (∼3.5 vs 0.35 mmol CO/gLSF) compared to pure LSF through six consecutive RWGS‐CL cycles at 700 °C. Following these RWGS‐CL cycles, XRD Scherrer analyses showed that the perovskite oxide in the composite material decreased in crystallite size. This approach to synthesis of supported perovskite oxides is expected to be valuable for large‐scale CO2conversion by RWGS‐CL.  more » « less
Award ID(s):
1560303
PAR ID:
10236423
Author(s) / Creator(s):
 ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
ChemCatChem
Volume:
12
Issue:
24
ISSN:
1867-3880
Format(s):
Medium: X Size: p. 6317-6328
Size(s):
p. 6317-6328
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Energy & Environmental Science)
    Conversion of CO 2 in a scalable technology has the potential for enormous energy and environmental impact but remains a challenge. We present several stable, earth abundant perovskite oxide materials for the reverse water gas shift chemical looping (RWGS-CL) process as a potential solution for this CO 2 mitigation problem. This material and process combination circumvents issues plaguing other emerging technologies, viz. poor rates of CO 2 conversion, high operation temperatures, use of precious metal catalysts, or combinations thereof. Using DFT-calculated oxygen vacancy formation energy, a key descriptor for the RWGS-CL process, we have successfully predicted several earth abundant perovskite oxides with high CO 2 conversion capability. We simultaneously achieved 100% selective CO generation from CO 2 at the highest known rates (∼160 μmoles per min per gram perovskite oxide) at record low process temperatures of 450–500 °C using lanthanum and calcium based perovskite oxides. These materials are stable over several RWGS-CL cycles, enabling industrial implementation. 
    more » « less
  2. ; ; ; ; (, System)
    Synthesis of amine incorporated hierarchical metal organic framework (MOF) MIL-101(Cr)/SBA-15, meso/ micro-porous composites, with tailored properties for CO 2 capture is reported. The synthesized composites were characterized in terms of their crystallinity, morphology, functional groups, and textural properties. Isothermal adsorption of CO 2 from concentrated sites as well as ambient conditions were evaluated by gravimetric and volumetric measurements. The optimized composite i.e., MIL-101(Cr)/SBA-15/PEI-25 showed improved pseudo- equilibrium adsorption capacity of 3.2 mmol/g at 303 K and 1 bar, compared to nascent SBA-15 (0.8 mmol/g) and the MOF, i.e., MIL-101(Cr) (1.3 mmol/g). Such adsorption performance can be attributed to the basic sites of the impregnated polyethyleneimine (PEI), unsaturated Cr(III) metal sites, and the hierarchical pore structure of the composite which imparts chemical as well physical adsorption forces towards CO 2 lower amine loading of 25 wt% in the composite resulted in facile CO 2 uptake. Interestingly, desorption at much lower temperature of 
    more » « less
  3. ; ; ; (, Fuel Cells)
    Abstract High surface area graphitic mesoporous carbons (M‐mGMC; M=Ni, Fe, Co or Ni‐Fe) were synthesizedviacatalytic graphitization using a hard template based synthesis method. In house prepared SBA‐15 silica material was impregnated with metal precursors to obtain M/SBA‐15, template for M‐mGMC synthesis. These materials were studied using different material characterization techniques, such as nitrogen adsorption desorption (BET), X‐ray diffraction (XRD) analysis, Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Specific surface area ranging from 1,227.9 m2g−1to 1,320.7 m2g−1was observed for four M‐mGMCs. Raman spectroscopy, XPS and wide angle XRD suggested presence of graphitic structure in these materials along with disorders. Electrocatalytic performance of these materials along with conventional carbon black (Vulcan XC‐72) were evaluated in a single‐stack proton exchange membrane fuel cell (PEMFC). Pt/NiFe‐mGMC exhibited enhanced electrocatalytic activity compared to Pt/Ni‐mGMC, Pt/Fe‐mGMC and Pt/Co‐mGMC electrocatalysts. However, Pt/NiFe‐mGMC lacked adequate proton transport in membrane electrode assembly (MEA) compared to Pt/Vulcan XC‐72. This exploratory study showed that NiFe‐mGMC may find application as electrocatalyst support material in PEMFC. 
    more » « less
  4. ; ; ; ; ; ; ; ; (, Advanced Functional Materials)
    Abstract All‐inorganic lead halide perovskite nanocrystals (NCs) have great optoelectronic properties with promising applications in light‐emitting diodes (LEDs), lasers, photodetectors, solar cells, and photocatalysis. However, the intrinsic toxicity of Pb and instability of the NCs impede their broad applications. Shell‐coating is an effective method for enhanced environmental stability while reducing toxicity by choosing non‐toxic shell materials such as metal oxides, polymers, silica, etc. However, multiple perovskite NCs can be encapsulated within the shell material and a uniform epitaxial‐type shell growth of well‐isolated NCs is still challenging. In this work, lead‐free vacancy‐ordered double perovskite Cs2SnX6(X = Cl, Br, and I) shells are epitaxially grown on the surface of CsPbX3NCs by a hot‐injection method. The effectiveness of the non‐toxic double perovskite shell protection is demonstrated by the enhanced environmental and phase stability against UV illumination and water. In addition, the photoluminescence quantum yields (PL QYs) increase for the CsPbCl3and CsPbBr3NCs after shelling because of the type I band alignment of the core/shell materials, while enhanced charge transport properties obtained from CsPbI3/Cs2SnI6core/shell NCs are due to the efficient charge separation in the type II core/shell band alignment. 
    more » « less
  5. ; ; ; ; ; ; (, Advanced Functional Materials)
    Abstract All‐solid‐state flexible asymmetric supercapacitors (ASCs) are developed by utilization of graphene nanoribbon (GNR)/Co0.85Se composites as the positive electrode, GNR/Bi2Se3composites as the negative electrode, and polymer‐grafted‐graphene oxide membranes as solid‐state electrolytes. Both GNR/Co0.85Se and GNR/Bi2Se3composite electrodes are developed by a facile one‐step hydrothermal growth method from graphene oxide nanoribbons as the nucleation framework. The GNR/Co0.85Se composite electrode exhibits a specific capacity of 76.4 mAh g−1at a current density of 1 A g−1and the GNR/Bi2Se3composite electrode exhibits a specific capacity of 100.2 mAh g−1at a current density of 0.5 A g−1. Moreover, the stretchable membrane solid‐state electrolytes exhibit superior ionic conductivity of 108.7 mS cm−1. As a result, the flexible ASCs demonstrate an operating voltage of 1.6 V, an energy density of 30.9 Wh kg−1at the power density of 559 W kg−1, and excellent cycling stability with 89% capacitance retention after 5000 cycles. All these results demonstrate that this study provides a simple, scalable, and efficient approach to fabricate high performance flexible all‐solid‐state ASCs for energy storage. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email