An official website of the United States government
The presence of heavy metals in our water supply poses an immense global public health burden. Heavy metal consumption is tied to increased mortality and a wide range of insidious health outcomes. In recent years, great strides have been made toward nanotechnological approaches for environmental problems, specifically the design of adsorbents to detoxify water, as well as for a related challenge of recovering valuable metals at low concentrations. However, applying nanomaterials at scale and differentiating which nanomaterials are best suited for particular applications can be challenging. Here, we report a methodology for loading nanomaterial coatings onto adsorbent membranes, testing different coatings against one another, and leveraging these materials under a variety of conditions. Our tailored coating for lead remediation, made from manganese-doped goethite nanoparticles, can filter lead from contaminated water to below detectable levels when coated onto a cellulose membrane, and the coated membrane can be recovered and reused for multiple cycles through mild tuning of pH. The Nano-SCHeMe methodology demonstrates a platform approach for effectively deploying nanomaterials for environmental applications and for direct and fair comparisons among these nanomaterials. Moreover, this approach is flexible and expansive in that our coatings have the potential to be applied to a range of sorbents.
more »
« less
Phosphate Elimination and Recovery Lightweight (PEARL) membrane: A sustainable environmental remediation approach
Aqueous phosphate pollution can dramatically impact ecosystems, introducing a variety of environmental, economic, and public health problems. While novel remediation tactics based on nanoparticle binding have shown considerable promise in nutrient recovery from water, they are challenging to deploy at scale. To bridge the gap between the laboratory-scale nature of these nanostructure solutions and the practical benchmarks for deploying an environmental remediation tool, we have developed a nanocomposite material. Here, an economical, readily available, porous substrate is dip coated using scalable, water-based processes with a slurry of nanostructures. These nanomaterials have tailored affinity for specific adsorption of pollutants. Our Phosphate Elimination and Recovery Lightweight (PEARL) membrane can selectively sequester up to 99% of phosphate ions from polluted waters at environmentally relevant concentrations. Moreover, mild tuning of pH promotes at will adsorption and desorption of nutrients. This timed release allows for phosphate recovery and reuse of the PEARL membrane repeatedly for numerous cycles. We combine correlative microscopy and spectroscopy techniques to characterize the complex microstructure of the PEARL membrane and to unravel the mechanism of phosphate sorption. More broadly, through the example of phosphate pollution, this work describes a platform membrane approach based on nanostructures with specific affinity coated on a porous structure. Such a strategy can be tuned to address other environmental remediation challenges through the incorporation of other nanomaterials.
more »
« less
- Award ID(s):
- 1929356
- PAR ID:
- 10237469
- Publisher / Repository:
- Proceedings of the National Academy of Sciences
- Date Published:
- Journal Name:
- Proceedings of the National Academy of Sciences
- Volume:
- 118
- Issue:
- 23
- ISSN:
- 0027-8424
- Page Range / eLocation ID:
- Article No. e2102583118
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Ensuring clean water sources is pivotal for sustainable development and the well-being of communities worldwide. This study represents a pioneering effort in water purification, exploring an innovative approach utilizing modified reduced graphene oxide (rGO) aerogels. These advanced materials promise to revolutionize environmental remediation efforts, specifically removing organic contaminants from aqueous solutions. The study investigates the exceptional adsorption properties of rGO-aerogel, enhanced with cysteamine, to understand its efficacy in addressing water pollution challenges. The characterization methods utilized encompass various analytical techniques, including FE-SEM, BET, FTIR, TGA, DSC, XPS, NMR, and elemental analysis. These analyses provide valuable insights into the material’s structural modifications and surface chemistry. The research comprehensively explores the intricacies of adsorption kinetics, equilibrium, and isothermal study to unravel the underlying mechanisms governing contaminant removal. MO and Ni2+ exhibited adsorption of 542.6 and 150.6 mg g−1, respectively, at 25 °C. Ni2+ has unveiled the highest removal at pH 5, and MO has shown high removal in a wide pH range (pH 4–7). Both contaminants have shown fast adsorption kinetic performance on an rGO-aerogel surface. This study aims to identify the synergistic effect of cysteamine and rGO in aerogel formation to remove heavy metals and organic contaminants. These findings mark a significant stride in advancing sustainable water-treatment methods and pioneering in synthesizing innovative materials with versatile applications in environmental contexts, offering a potential solution to the global water pollution crisis.more » « less
-
Modern industrial waste waters often contain high concentrations of phosphate, and many methods have been explored to aid in its removal. This study investigates the use of magnetic nanoparticles as an adsorbent for phosphate removal. Aluminum-doped magnetic nanoparticles were synthesized using a co-precipitation method. Structure and composition analysis of the prepared magnetic nanoparticles indicated an inverse spinal structure with a composition of FeAl0.75Fe1.25O4. These nanoparticles were tested for their phosphate removal properties, including adsorption capacity, selectivity, and kinetic models. They showed great affinity to phosphate with a maximum adsorption capacity of 102 mg/g. Additionally, the adsorption was selective, and the presence of other common anions and organic matters did not interfere with the phosphate adsorption efficacy. The kinetic analysis of phosphate adsorption suggested a pseudo-second-order adsorption behavior, and the adsorption isotherm studies indicated a Langmuir type adsorption. The phosphate removal capabilities of the nanoparticles were also tested in poultry rinsing water, tap water, and municipal wastewaters, all with high phosphate removal efficiency. The overall results from these experiments showed promising results for the phosphate removal efficacy of these nanoparticles.more » « less
-
null (Ed.)Heavy metal ions are highly toxic and widely spread as environmental pollutants. This work reports the development of two novel chelating adsorbents, based on the chemical modifications of graphene oxide and zirconium phosphate by functionalization with melamine-based chelating ligands for the effective and selective extraction of Hg( ii ) and Pb( ii ) from contaminated water sources. The first adsorbent melamine, thiourea-partially reduced graphene oxide (MT-PRGO) combines the heavier donor atom sulfur with the amine and triazine nitrogen's functional groups attached to the partially reduced GO nanosheets to effectively capture Hg( ii ) ions from water. The MT-PRGO adsorbent shows high efficiency for the extraction of Hg( ii ) with a capacity of 651 mg g −1 and very fast kinetics resulting in a 100% removal of Hg( ii ) from 500 ppb and 50 ppm concentrations in 15 second and 30 min, respectively. The second adsorbent, melamine zirconium phosphate (M-ZrP), is designed to combine the amine and triazine nitrogen's functional groups of melamine with the hydroxyl active sites of zirconium phosphate to effectively capture Pb( ii ) ions from water. The M-ZrP adsorbent shows exceptionally high adsorption affinity for Pb( ii ) with a capacity of 681 mg g −1 and 1000 mg g −1 using an adsorbent dose of 1 g L −1 and 2 g L −1 , respectively. The high adsorption capacity is also coupled with fast kinetics where the equilibrium time required for the 100% removal of Pb( ii ) from 1 ppm, 100 ppm and 1000 ppm concentrations is 40 seconds, 5 min and 30 min, respectively using an adsorbent dose of 1 g L −1 . In a mixture of six heavy metal ions at a concentration of 10 ppm, the removal efficiency is 100% for Pb( ii ), 99% for Hg( ii ), Cd( ii ) and Zn( ii ), 94% for Cu( ii ), and 90% for Ni( ii ) while at a higher concentration of 250 ppm the removal efficiency for Pb( ii ) is 95% compared to 23% for Hg( ii ) and less than 10% for the other ions. Because of the fast adsorption kinetics, high removal capacity, excellent regeneration, stability and reusability, the MT-PRGO and M-ZrP are proposed as top performing remediation adsorbents for the solid phase extraction of Hg( ii ) and Pb( ii ), respectively from contaminated water.more » « less
-
Abstract Membrane‐based technologies are attractive for remediating oily wastewater because they are relatively energy‐efficient and are applicable to a wide range of industrial effluents. For complete treatment of oily wastewater, removing dissolved contaminants from the water phase is typically followed by adsorption onto an adsorbent, which complicates the process. Here, an in‐air superhydrophilic and underwater superoleophobic membrane‐based continuous separation of surfactant‐stabilized oil‐in‐water emulsions and in situ decontamination of water by visible‐light‐driven photocatalytic degradation of dissolved organic contaminants is reported. The membrane is fabricated by utilizing a thermally sensitized stainless steel mesh coated with visible light absorbing iron‐doped titania nanoparticles. Post annealing of the membrane can enhance the adhesion of nanoparticles to the membrane surface by formation of a bridge between them. An apparatus that enables continuous separation of surfactant‐stabilized oil‐in‐water emulsion and in situ photocatalytic degradation of dissolved organic matter in the water‐rich permeate upon irradiation of visible light on the membrane surface with greater than 99% photocatalytic degradation is developed. The membrane demonstrates the recovery of its intrinsic water‐rich permeate flux upon continuous irradiation of light after being contaminated with oil. Finally, continuous oil−water separation and in situ water decontamination is demonstrated by photocatalytically degrading model toxins in water‐rich permeate.more » « less
