skip to main content

Explore Research Products in the NSF-PAR

Title: Nonlinear Hierarchical MPC for Maximizing Aircraft Thermal Endurance
In modern high-performance aircraft, the Fuel Thermal Management System (FTMS) plays a critical role in the overall thermal energy management of the aircraft. Actuator and state constraints in the FTMS limit the thermal endurance and capabilities of the aircraft. Thus, an effective control strategy must plan and execute optimized transient fuel mass and temperature trajectories subject to these constraints over the entire course of operation. For the control of linear systems, hierarchical Model Predictive Control (MPC) has shown to be an effective approach to coordinating both short- and long-term system operation with reduced computational complexity. However, for controlling nonlinear systems, common approaches to system linearization may no longer be effective due to the long prediction horizons of upper-level controllers. This paper explores the limitations of using linear models for hierarchical MPC of the nonlinear FTMS found in aircraft. Numerical simulation results show that linearized models work well for lower-level controllers with short prediction horizons but lead to significant reductions in aircraft thermal endurance when used for upper-level controllers with long prediction horizons. Therefore, a mixed-linearity hierarchical MPC formulation is presented with a nonlinear upper-level controller and a linear lower-level controller to achieve both high performance and high computational efficiency.  more » « less
Award ID(s):
1849500
NSF-PAR ID:
10250490
Author(s) / Creator(s):
;
Date Published:
Journal Name:
Dynamic Systems and Control Conference
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ( , Dynamic Systems and Control Conference)
    null (Ed.)
    Hybrid-electric aircraft represent an important step in the transition from conventional fuel-based propulsion to fully-electric aircraft. For hybrid power systems, overall aircraft performance and efficiency highly depend on the coordination of the fuel and electrical systems and the ability to effectively control state and input trajectories at the limits of safe operation. In such a safety-critical application, the chosen control strategy must ensure the closed-loop system adheres to these operational limits. While hierarchical Model Predictive Control (MPC) has proven to be a computationally efficient approach to coordinated control of complex systems across multiple timescales, most formulations are not supported by theoretical guarantees of actuator and state constraint satisfaction. To provide guaranteed constraint satisfaction, this paper presents set-based hierarchical MPC of a 16 state hybrid-electric aircraft power system. Within the proposed two-level vertical hierarchy, the long-term control decisions of the upper-level controller and the short-term control decisions of the lower-level controller are coordinated through the use of waysets. Simulation results show the benefits of this coordination in the context of hybrid-electric aircraft performance and demonstrate the practicality of applying set-based hierarchical MPC to complex multi-timescale systems. 
    more » « less
  2. ; ; ; ( , American Control Conference)
    null (Ed.)
    The performance of hierarchical Model Predictive Control (MPC) is highly dependent on the mechanisms used to coordinate the decisions made by controllers at different levels of the hierarchy. Conventionally, reference tracking serves as the primary coordination mechanism, where optimal state and input trajectories determined by upper-level controllers are communicated down the hierarchy to be tracked by lower-level controllers. As such, significant tuning is required for each controller in the hierarchy to achieve the desired closed-loop system performance. This paper presents a novel terminal cost coordination mechanism using constrained zonotopes, designed to improve system performance under hierarchical control. These terminal costs allow lower-level controllers to balance both short- and long-term control performance without the need for controller tuning. Unlike terminal costs widely used to guarantee MPC stability, the proposed terminal costs are time-varying and computed on-line based on the optimal state trajectory of the upper-level controllers. A numerical example demonstrates the provable performance benefits achieved using the proposed terminal cost coordination mechanism. 
    more » « less
  3. ; ( , Journal of Dynamic Systems, Measurement, and Control)
    Abstract This paper presents a hierarchical nonlinear control algorithm for the real-time planning and control of cooperative locomotion of legged robots that collaboratively carry objects. An innovative network of reduced-order models subject to holonomic constraints, referred to as interconnected linear inverted pendulum (LIP) dynamics, is presented to study cooperative locomotion. The higher level of the proposed algorithm employs a supervisory controller, based on event-based model predictive control (MPC), to effectively compute the optimal reduced-order trajectories for the interconnected LIP dynamics. The lower level of the proposed algorithm employs distributed nonlinear controllers to reduce the gap between reduced- and full-order complex models of cooperative locomotion. In particular, the distributed controllers are developed based on quadratic programing (QP) and virtual constraints to impose the full-order dynamical models of each agent to asymptotically track the reduced-order trajectories while having feasible contact forces at the leg ends. The paper numerically investigates the effectiveness of the proposed control algorithm via full-order simulations of a team of collaborative quadrupedal robots, each with a total of 22 degrees-of-freedom. The paper finally investigates the robustness of the proposed control algorithm against uncertainties in the payload mass and changes in the ground height profile. Numerical studies show that the cooperative agents can transport unknown payloads whose masses are up to 57%, 97%, and 137% of a single agent's mass with a team of two, three, and four legged robots. 
    more » « less
  4. ; ; ; ( , Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering)
    null (Ed.)
    The Current practice of air-fuel ratio control relies on empirical models and traditional PID controllers, which require extensive calibration to maintain the post-catalyst air-fuel ratio close to stoichiometry. In contrast, this work utilizes a physics-based Three-Way Catalyst (TWC) model to develop a model predictive control (MPC) strategy for air-fuel ratio control based on internal TWC oxygen storage dynamics. In this paper, parameters of the physics-based temperature and oxygen storage models of the TWC are identified using vehicle test data for a catalyst aged to 150,000 miles. A linearized oxygen storage model is then developed from the identified nonlinear model, which is shown via simulation to follow the nonlinear model with minimal error during nominal operation. This motivates the development of a Linear MPC (LMPC) framework using the linearized TWC oxygen storage model, reducing the requisite computational effort relative to a nonlinear MPC strategy. In this work, the LMPC utilizing a linearized physics-based TWC model is proven suitable for tracking a desired oxygen storage level by controlling the commanded engine air-fuel ratio, which is also a novel contribution. The offline simulation results show successful tracking performance of the developed LMPC framework. 
    more » « less
  5. ; ; ; ; ( , Proceedings of the ... American Control Conference)
    Reactivity controlled compression ignition (RCCI) engines center on a combustion strategy with higher thermal efficiency, lower particulate matter (PM), and lower oxides of nitrogen (NOx) emissions compared to conventional diesel combustion (CDC) engines. However, real time optimal control of RCCI engines is challenging during transient operation due to the need for high fidelity combustion models. Development of a simple, yet accurate control-oriented RCCI model from physical laws is time consuming and often requires substantial calibrations. To overcome these challenges, data-driven models can be developed. In this paper, a data-driven linear parameter varying (LPV) model for an RCCI engine is developed. An LPV state space model is identified to predict RCCI combustion phasing as a function of multiple RCCI control variables. The results show that the proposed method provides a fast and reliable route to identify an RCCI engine model. The developed model is then used for the design of a model predictive controller (MPC) to control crank angle for 50% fuel burnt (CA50) for varying engine conditions. The experimental results show that the designed MPC with the data-driven LPV model can track desired CA50 with less than 1 crank angle degree (CAD) error against changes in engine load. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email