skip to main content

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Hierarchical Multi-Timescale Energy Management for Hybrid-Electric Aircraft
Hybrid-electric aircraft represent an important step in the transition from conventional fuel-based propulsion to fully-electric aircraft. For hybrid power systems, overall aircraft performance and efficiency highly depend on the coordination of the fuel and electrical systems and the ability to effectively control state and input trajectories at the limits of safe operation. In such a safety-critical application, the chosen control strategy must ensure the closed-loop system adheres to these operational limits. While hierarchical Model Predictive Control (MPC) has proven to be a computationally efficient approach to coordinated control of complex systems across multiple timescales, most formulations are not supported by theoretical guarantees of actuator and state constraint satisfaction. To provide guaranteed constraint satisfaction, this paper presents set-based hierarchical MPC of a 16 state hybrid-electric aircraft power system. Within the proposed two-level vertical hierarchy, the long-term control decisions of the upper-level controller and the short-term control decisions of the lower-level controller are coordinated through the use of waysets. Simulation results show the benefits of this coordination in the context of hybrid-electric aircraft performance and demonstrate the practicality of applying set-based hierarchical MPC to complex multi-timescale systems.  more » « less
Award ID(s):
1849500
PAR ID:
10250494
Author(s) / Creator(s):
;
Date Published:
Journal Name:
Dynamic Systems and Control Conference
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ( , Dynamic Systems and Control Conference)
    null (Ed.)
    In modern high-performance aircraft, the Fuel Thermal Management System (FTMS) plays a critical role in the overall thermal energy management of the aircraft. Actuator and state constraints in the FTMS limit the thermal endurance and capabilities of the aircraft. Thus, an effective control strategy must plan and execute optimized transient fuel mass and temperature trajectories subject to these constraints over the entire course of operation. For the control of linear systems, hierarchical Model Predictive Control (MPC) has shown to be an effective approach to coordinating both short- and long-term system operation with reduced computational complexity. However, for controlling nonlinear systems, common approaches to system linearization may no longer be effective due to the long prediction horizons of upper-level controllers. This paper explores the limitations of using linear models for hierarchical MPC of the nonlinear FTMS found in aircraft. Numerical simulation results show that linearized models work well for lower-level controllers with short prediction horizons but lead to significant reductions in aircraft thermal endurance when used for upper-level controllers with long prediction horizons. Therefore, a mixed-linearity hierarchical MPC formulation is presented with a nonlinear upper-level controller and a linear lower-level controller to achieve both high performance and high computational efficiency. 
    more » « less
  2. ; ; ; ( , American Control Conference)
    null (Ed.)
    The performance of hierarchical Model Predictive Control (MPC) is highly dependent on the mechanisms used to coordinate the decisions made by controllers at different levels of the hierarchy. Conventionally, reference tracking serves as the primary coordination mechanism, where optimal state and input trajectories determined by upper-level controllers are communicated down the hierarchy to be tracked by lower-level controllers. As such, significant tuning is required for each controller in the hierarchy to achieve the desired closed-loop system performance. This paper presents a novel terminal cost coordination mechanism using constrained zonotopes, designed to improve system performance under hierarchical control. These terminal costs allow lower-level controllers to balance both short- and long-term control performance without the need for controller tuning. Unlike terminal costs widely used to guarantee MPC stability, the proposed terminal costs are time-varying and computed on-line based on the optimal state trajectory of the upper-level controllers. A numerical example demonstrates the provable performance benefits achieved using the proposed terminal cost coordination mechanism. 
    more » « less
  3. ; ; ; ( , ASME Journal of Engineering for Sustainable Buildings and Cities)
    null (Ed.)
    Abstract This paper presents a novel architecture for model predictive control (MPC)-based indoor climate control of multi-zone buildings to provide energy efficiency. Unlike prior works, we do not assume the availability of a high-resolution multi-zone building model, which is challenging to obtain. Instead, the architecture uses a low-resolution model of the building that is divided into a small number of “meta-zones” that can be easily identified using existing data-driven modeling techniques. The proposed architecture is hierarchical. At the higher level, an MPC controller uses the low-resolution model to make decisions for the air handling unit (AHU) and the meta-zones. Since the meta-zones are fictitious, a lower level controller converts the high-level MPC decisions into commands for the individual zones by solving a projection problem that strikes a trade-off between two potentially conflicting goals: the AHU-level decisions made by the MPC are respected while the climate of the individual zones is maintained within the comfort bounds. The performance of the proposed controller is assessed via simulations in a high-fidelity simulation testbed and compared to that of a rule-based controller that is used in practice. Simulations in multiple weather conditions show the effectiveness of the proposed controller in terms of energy savings, climate control, and computational tractability. 
    more » « less
  4. ; ; ; ; ( , Journal of Propulsion and Power)
    Distributed hybrid and electric propulsion systems are one of the most promising technologies to reduce aircraft emissions, resulting in research efforts to investigate new architectures and the design of optimal energy management strategies. This work defines the optimal requirements in terms of battery pack sizing and cell technology for a hybrid-electric regional wing-mounted distributed propulsion aircraft through the application of a design space exploration method. The propulsion system considered in this study is a series-parallel hybrid turboelectric power train with distributed electric fans. A set of six lithium-ion battery cell technologies was identified and experimentally characterized, including both commercially available and prototype cells at different combinations of specific energy and power. A model of the aircraft was developed and used to define the optimal energy management strategy for the hybrid turboelectric propulsion system, which was solved using dynamic programming. The design space exploration was conducted by varying the cell technology and battery storage system size; and the effects on fuel consumption, energy management strategy, and thermal management were compared. 
    more » « less
  5. ; ; ( , SICE International Symposium on Control Systems)
    Here we present a hybrid hierarchical statistical control approach for the control of robotic manipulators. The bimodal dynamic imaging system considered in this paper utilizes two robotic manipulators to move the source and detector imaging modules. As this system contains both continuous and discrete dynamics, hybrid system control techniques are applied. The robotic arms used in this research are comprised of compliant joints, which have been shown to introduce process noise into the system. To address this, a full-state feedback statistical controller is developed to minimize joint angle variations for the system. The statistical controllers for the two robot arms are then coordinated using a hierarchical controller. Finally, the feasibility of the hybrid hierarchical statistical controller is demonstrated with numerical simulations. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email