skip to main content


Title: C7. (2021). “Performance of prefabricated thermal drains in soft clay.” Geosynthetics 2021. Kansas City. Feb. 21-23. IFAI, Roseville, MI. 1-12.
This paper focuses on the behavior of prefabricated thermal drains used to improve saturated clay layers using heating. A prefabricated thermal drain can be formed by integrating a closed-loop geothermal heat exchanger within a conventional prefabricated vertical drain (PVD). Prefabricated thermal drains can be installed in a similar way to a PVD but operate by circulating a heated fluid through the heat exchanger tubing to induce an increase in temperature of the soft clay. This increase in temperature will lead to thermal consolidation, which can be accelerated by drainage through the PVD. Although thermal drains have been tested in proof of concept field experiments, there are still several variables that need to be better understood. This paper presents numerical simulations of the coupled heat transfer, water flow, and volume change in layers of kaolinite, illite and smectite clays within a large-scale oedometer with a prefabricated thermal drain embedded at the center. Thermally induced excess pore water pressures and a slight initial expansion was observed for clay layers with lower hydraulic conductivity. However, the overall volume change resulted in contraction where the rate as well as the magnitude of settlement was greater for a thermal PVD compared to a conventional PVD. A further analysis of kaolinite layers with different initial porosities indicated that the increase in the magnitude of settlement observed when using a thermal PVD was independent of the hydraulic conductivity of the clay whereas the increase in the rate of settlement was more pronounced for clays with lower hydraulic conductivity.  more » « less
Award ID(s):
1941571
NSF-PAR ID:
10251004
Author(s) / Creator(s):
;
Editor(s):
Nicks, J. and
Date Published:
Journal Name:
Proceedings of Geosynthetics 2021
Page Range / eLocation ID:
1-12
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. null (Ed.)
    This paper focuses on the thermo-hydro-mechanical behavior of soft clay surrounding a prefabricated thermal drain. A prefabricated thermal drain combines features of a conventional prefabricated vertical drain (PVD) and a closed-loop geothermal heat exchanger by placing plastic tubing within the core of the PVD through which heated fluid can be circulated. The prefabricated thermal drain can be used to increase the temperature of the surrounding soft clay, which will generate excess pore water pressures due to differential thermal expansion of the pore fluid and clay particles. As these excess pore water pressures drain, the soft clay will experience volumetric contraction. The elevated temperature leads to an increase in the hydraulic conductivity and the volumetric contraction leads to an increase in thermal conductivity, making this a highly coupled process. Although thermal drains have been tested in proof of concept field experiments, there are still several variables that need to be better understood. This paper presents numerical simulations of the coupled heat transfer, water flow, and volume change in the soft soil surrounding a prefabricated thermal drain that were validated using the results from large-scale laboratory experiments. Numerical simulations were found to agree well with the experimental data. A further analysis on the performance of the thermal PVD indicates an increase in surface settlement with an increase in drain temperature and a significant reduction in the surcharge required when using a thermal PVD. 
    more » « less
  2. Cement substitution with calcined kaolinite–montmorillonite clay blends as an effective way to suppress alkali-silica reaction in cement composites containing reactive aggregates is investigated. Expansion, cracking behavior, mechanical properties and microstructure of the cement composites were investigated. Hydration of the ternary cement blends was also characterized. The results indicate that cement modification with a combination of calcined kaolinite–montmorillonite clays can effectively mitigate alkali-silica reaction-induced deteriorations. By incorporating 30% clays, the volume expansion of the cement composites was decreased from deleterious to innocuous level. Amount of cracks was decreased with increasing clay incorporations. In the presence of combined calcined clays, the strength gain of the cement composites is more significant the strength loss caused by alkali-silica reaction indicating the effective mitigation of this virulent reaction in concrete. 
    more » « less
  3. The thermo-mechanical behavior of saturated clays during a heating/cooling cycle is relevant from the perspective of understanding different types of energy geostructures as well as understanding the use of heat for soil improvement. This paper involves a study of the effect of a heating/cooling cycle on the preconsolidation stress of saturated normally consolidated clays. Although many studies have observed a decrease in preconsolidation stress (thermal softening) after heating of overconsolidated soils, fewer studies have investigated changes in preconsolidation stress of normally consolidated soils. Available thermo-elasto-plastic models indicate that a heating-cooling cycle will lead to thermal contraction and an apparent overconsolidation effect for normally consolidated soils (thermal hardening), but inconsistencies in the literature have been observed. This study involves the use of a thermal triaxial cell to first consolidate kaolinite clay to normally consolidated conditions, apply a drained heating or a heating/cooling cycle, followed by mechanical loading to higher mean effective stresses. The tests presented in this study confirm that cooling also induces an apparent overconsolidation effect on the initially normally consolidated clay, but with a preconsolidation stress greater than that expected from the initial virgin consolidation line before heating. The results are a positive finding regarding the possible use of heat to improve the mechanical response of soft clays. 
    more » « less
  4. McCartney, J.S. ; Tomac, I. (Ed.)
    This paper focuses on the results from thermal triaxial tests on normally consolidated Georgia Kaolinite. The hypothesis evaluated in this study is whether the initial mean effective stress has an impact on the thermal volume change encountered during drained heating. To that effect, specimens at three different initial mean effective stresses were considered in this study. The clay specimens were first isotropically consolidated to a normally consolidated state, then subjected to a drained heating cooling cycle followed by further mechanical loading to higher effective stresses. The results indicate contractive volumetric strain during drained heating where the volumetric strain was found to increase with increasing initial mean effective stress. A rebound in volume was observed during subsequent cooling where the net change in volume transitioned from zero volume change of the specimen to net contraction of the specimen after a heating cooling cycle as the initial mean effective stress increased. The results indicate the need for considering the effect of initial mean effective stress when assessing in-situ heating as a method of soil improvement. 
    more » « less
  5. Amziane, S. ; Merta, I. ; Page, J. (Ed.)
    Sustainable earthen building materials provide a pathway to mitigating the environmental impacts of the modern construction sector. While the application of these materials has been limited due to the inherent heterogeneity, erosivity, and weak mechanical properties of soil, the physical and thermal properties can be improved through the addition of ubiquitous, non-toxic, sustainable biopolymers. Yet, the fundamental understanding of the physiochemical bonding mechanisms between clays and biopolymers in this system is limited. In this work, a ‘micro to macro’ methodological approach was applied to investigate the bonding characteristics of common clays and clay-stabilizing biopolymers. At the micro-scale, fundamental interactions of clays (i.e., kaolinite, bentonite) with biopolymer additives (i.e., xanthan gum, guar gum, sodium alginate, microcrystalline cellulose) were assessed through mineral binding characterization techniques, including Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The findings were used to interpret unconfined compressive strength (UCS) tests results for macro-scale soil-biopolymer composites samples (1% biopolymer by soil mass). The results from this study illustrate the utility of understanding the mechanisms of clay-biopolymer interactions for improving the design of strong and durable earthen materials and structures. 
    more » « less