skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Gain Enhancement of a 94GHz LTCC Integrated Horn Antenna Using High Impedance Periphery
There is a growing interest to implement antennain-package (AiP) systems for a variety of applications such as imaging, beamforming, integrated transceivers, and radars. Substrate integrated pyramidal antennas are valuable AiP candidates owing to their small form factor, integration ease, and high gain. However, height reduction, dielectric losses and integration of the latter can drastically degrade their gain pattern and limit their applications. This degradation is mainly due to undesired excitations on the surface of the dielectric. For the first time in this paper, we present a Grounded Co-Planar Waveguide-fed (GCPW) 94GHz low temperature cofired ceramic (LTCC) pyramidal horn antenna. To prevent parasitic TE excitations, a mushroom type High Impedance Surface (HIS) periphery is implemented. The combined antenna with HIS surrounding leads to approximately 2.3dB improvement in gain. Concurrently, the 3dB beamwidth is reduced by 26 in both E-Plane and H-Plane  more » « less
Award ID(s):
1809728
PAR ID:
10271612
Author(s) / Creator(s):
Date Published:
Journal Name:
Applied Computational Electromagnetics Society journal
ISSN:
1054-4887
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, 2019 International Workshop on Antenna Technology (iWAT))
    null (Ed.)
    There is a strong interest to implement antennain-package (AiP) systems for a cohort of applications such as imaging, beamforming, integrated transceivers, and radars. Substrate integrated pyramidal antennas (SIPA) are valuable AiP candidates owing to their small form factor, integration ease, and high gain. However, height reduction and substrate integration can drastically reduce the overall directivity of such antennas and hence limit their potential applications. This degradation is mainly due to surface waves propagating and radiating on the dielectric. For the first time in this paper, we present a 94GHz low temperature cofired ceramic (LTCC) integrated pyramidal horn antenna. To prevent transverse magnetic (TM) surface waves, a mushroom type electromagnetic bandgap (EBG) structure is implemented in the surrounding of the horn. The LTCC fabrication is particularly suitable for this kind of structure. Since only a single well is needed to fabricate the horn and the EBG structure, complexity and cost are minimized. The combined antenna with EBG surrounding leads to approximately 1.8dB improvement in maximum directivity. Concurrently, the 3dB beamwidth is reduced by 10 for the E-Plane and 20 for the H-Plane 
    more » « less
  2. ; (, IEEE)
    A millimeter (mm)-wave beam steering antenna consisting of subarrays of parallel plate lenses is presented for the first time. As compared to a previously reported antenna that utilized subarrays of dielectric slab waveguide lenses, the presented antenna allows to design and control the beamwidth of the radiation pattern in the plane orthogonal to the beam steering plane by stacking the parallel plate lens subarrays. Additionally, full wave simulations of the presented antenna show performance improvements in gain, side lobe level, and field of view in comparison to the previously reported dielectric slab waveguide-based realization. 
    more » « less
  3. ; (, Scientific Reports)
    A circular polarized (CP) pentaband antenna based on the aperture-in-aperture (AIA) concept is presented for CubeSat applications. This AIA consists of five different bands ranging from L-band to Ka-band. Four different antennas, each operating at a specific frequency band, namely 12 GHz, 18.5 GHz, 26 GHz, and 32 GHz, were incorporated into an L-band (viz. 1.5 GHz) antenna. Notably, the five antennas can operate simultaneously for a CubeSat downlink operation with a frequency ratio of 21.3:1. The antenna structure shows a realized gain of 5–10 dBi with good CP bandwidth (< 3 dB) across the overall operational frequency range. That is, the realized gain of L-band (1.5 GHz), X-band (12.5 GHz), K-band1 (18.5 GHz), K-band2 (26 GHz), and Ka-bands (32 GHz) are 5.05 dBi, 8.21 dBi, 7.33 dBi, 7.97 dBi, and 8.56 dBi. A high impedance surface (HIS) is incorporated with the Ka-band antenna to mitigate the ripples in the radiation pattern created by the interference of surface waves. A prototype was fabricated and tested. The measurement data agrees well with the simulation. 
    more » « less
  4. ; ; (, 2022 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (AP-S/URSI))
    This paper presents a compact phased-array antenna for efficient and high-gain millimeter-wave-based 3D beam steering applications. The proposed antenna array consists of 2 × 2 unit cells and each unit cell is a sub-array comprising of 2 × 2 patch elements connected to microstrip lines that are co-fed by a single coaxial cable. Two 45° phase shifting lines are incorporated in each sub-array to facilitate the wide beamsteering range. The dimensions of the proposed phased array antenna are 24 × 24 × 0.324 mm 3 . Simulation results show that the proposed phased-array antenna has a resonating frequency at 58.4 GHz with an operational bandwidth from 50.1 GHz to 77.5 GHz along with a high gain of 26.8 dBi. The array exhibits a maximum beam steering range of 105° in the elevation plane and 195° in the azimuth plane with a gain variation less than 0.9 dBi. 
    more » « less
  5. ; (, 2019 IEEE Texas Symposium on Wireless and Microwave Circuits and Systems (WMCS))
    In this paper, a 4 ×4-element waveguide-aperture array antenna is designed for applications in the 60 GHz band. To simplify the design process of the feed network, instead of using a conventional waveguide power divider, an efficient approach is proposed where the antenna is fed with two layers of back cavities to distribute power uniformly among the array aperture. The connection between cavities is obtained by a set of coupling slots. A standard WR-15 rectangular waveguide is designed to excite the antenna at the input port over the operating frequency. Furthermore, to improve the antenna gain characteristics and reduce size, array aperture is loaded with a dielectric plate. The most significant advantage of using this design is its efficient radiation patterns and the ability to decrease complexity of feeding network. Simulated results demonstrate that the antenna gain is larger than 25 dB over the frequency range from 58 to 64 GHz. This high gain antenna combined with the simplicity of feeding network is greatly advantageous to millimeter wave applications. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email