This study used radar observations and a high‐resolution numerical simulation to explore the interactions between an mesoscale convective system (MCS), cold pool outflows, and atmospheric bores in a non‐uniform baroclinic environment. The bores were generated by a nocturnal MCS that occurred on 2–3 June 2017 over the southern North China Plain. The goal of this investigation is to determine how the structure of bores varied within this non‐uniform environment and whether and how the bores would maintain the MCS and alter its structure. To the southwest of the MCS, where there was large CAPE and a well‐mixed boundary layer, discrete convection initiation occurred behind a single radar fine line (RFL) maintaining the propagation of the MCS. To the southeast of the MCS, multiple RFLs were found suggesting the generation of an undular bore in an environment containing an intense nocturnal stable boundary layer with dry upper layers and little CAPE. Hydraulic and nonlinear theory were applied to the simulation of the MCS revealing that the differences in the bore evolution depended on both the characteristics of the cold pool and the variations in the ambient environment. Thus, the characteristics of the ambient environment and the associated differences in bore structure impacted the maintenance and organization of the MCS. This study implies the importance of an accurate representation of the low‐level ambient environment and the microphysics and kinematics within the MCS to accurately simulate and forecast cold pools, the generation and evolution of bores, and their impact on nocturnal MCSs.
Bores have been shown to play a role in the initiation and maintenance of mesoscale convective systems (MCSs), particularly during the night after the boundary layer stabilizes. To date, the generation, evolution, and structure of bores over China has received little attention. This study utilizes observations and simulations with the WRF‐ARW model to investigate the generation and evolution of an atmospheric bore observed over Yangtze‐Huai Plains of China. The bore was associated with a nocturnal MCS that first formed over elevated terrain. The bore was observed ahead of the MCS with a maximum lateral extension of ~100 km. The feature lasted for over 90 mins and propagated at a speed of ~13 m/s, slightly faster than the MCS. In the simulation, the bore evolved from the separating “head” of the convectively generated gravity current. The bore then continued to propagate ahead of the MCS, even after the dissipation of the feeder current, and took on the appearance of an undular bore. The bore lifted a layer of convectively unstable air above the nocturnal surface inversion, initiating new convection ahead of the MCS to help maintain the MCS. The Scorer parameter ahead of the bore revealed a low‐level wind profile with curvature of the vertical profile of horizontal wind, favoring the trapping of wave energy and the persistence of the bore. These results are generally consistent with the role of bores in the maintenance of nocturnal MCSs and emphasize the need for future studies into the relationship between bores and nocturnal MCSs over China.
more » « less- Award ID(s):
- 1921587
- NSF-PAR ID:
- 10455642
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Journal of Geophysical Research: Atmospheres
- Volume:
- 125
- Issue:
- 18
- ISSN:
- 2169-897X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
Abstract This study investigates a nocturnal mesoscale convective system (MCS) observed during the Plains Elevated Convection At Night (PECAN) field campaign. A series of wavelike features were observed ahead of this MCS with extensive convective initiation (CI) taking place in the wake of one of these disturbances. Simulations with the WRF-ARW Model were utilized to understand the dynamics of these disturbances and their impact on the MCS. In these simulations, an “elevated bore” formed within an inversion layer aloft in response to the layer being lifted by air flowing up and over the cold pool. As the bore propagated ahead of the MCS, the lifting created an environment more conducive to deep convection allowing the MCS to discretely propagate due to CI in the bore’s wake. The Scorer parameter was somewhat favorable for trapping of this wave energy, although aspects of the environment evolved to be consistent with the expectations for an n = 2 mode deep tropospheric gravity wave. A bore within an inversion layer aloft is reminiscent of disturbances predicted by two-layer hydraulic theory, contrasting with recent studies that suggest bores are frequently initiated by the interaction between the flow within stable nocturnal boundary layer and convectively generated cold pools. Idealized simulations that expand upon this two-layer approach with orography and a well-mixed layer below the inversion suggest that elevated bores provide a possible mechanism for daytime squall lines to remove the capping inversion often found over the Great Plains, particularly in synoptically disturbed environments where vertical shear could create a favorable trapping of wave energy.more » « less
-
more » « less
Abstract Small-scale variations within the low-level outflow and inflow of an MCS can either support or deter the upscale growth and maintenance of the MCS. However, these small-scale variations, in particular in the thermodynamics (temperature and humidity), remain poorly understood, due to a lack of detailed measurements. The compact Raman lidar (CRL) deployed on the University of Wyoming King Air aircraft directly sampled temperature and water vapor profiles at unprecedented vertical and along-track resolutions along the southern margin of a series of mature nocturnal MCSs traveling along a frontal boundary on 1 July 2015 during the Plains Elevated Convection at Night (PECAN) campaign. Here, the capability of the airborne CRL to document interactions between the MCS inflow and outflow currents is illustrated. The CRL reveals the well-defined boundary of a cooler current. This is interpreted as the frontal boundary sharpened by convectively induced cold pools, in particular by the outflow boundary of the downstream MCS. In one CRL transect, the frontal/outflow boundary appeared as a distinct two-layer structure of moisture and aerosols formed by moist stable boundary layer air advected above the boundary. The second transect, one hour later, reveals a single sloping boundary. In both cases, the lofting of the moist stably stratified air over the boundary favors MCS maintenance, through enhanced elevated CAPE and reduced CIN. The CRL data are sufficiently resolved to reveal Kelvin–Helmholtz (KH) billows and the vertical structure of the outflow boundary, which in this case behaved as a density current rather than an undular bore.
-
null (Ed.)Abstract In a mesoscale convective system (MCS), convection that redevelops over (i.e., back-builds), and/or repeatedly passes over (i.e., trains) a region for an extended period of time can contribute to extreme rainfall and flash flooding. Past studies have indicated that both mesoscale ascent and lifting of the inflow layer by a cold pool or bore are important when this back-building/training convection is displaced from the leading line [sometimes called rearward off-boundary development (ROD)]. However, Plains Elevated Convection At Night (PECAN) field campaign observations suggest that the stability of the nocturnal boundary layer is highly variable and some MCSs with ROD have only a weak surface cold pool. Numerical simulations presented in this study suggest that in an environment with strong boundary layer stability, ROD can be supported by mechanisms other than those mentioned above. Simulations were initialized using a sounding from ahead of a PECAN MCS with a strong stable layer and ROD, and the three-dimensional simulation produced an MCS similar to that observed despite the homogeneous initial conditions. Some of the findings presented herein challenge existing understanding of nocturnal MCSs, and especially how downdrafts interact with a stable boundary layer. Notably, downdrafts can reach the surface, and different regions of the MCS may have different propagation mechanisms and different relevant inflow layers. Unlike previous studies of ROD, parcel lifting may be supported by an intrusion (an elevated layer of downdraft air) modified by the three-dimensional vertical wind shear.more » « less
-
Abstract This study investigates the sensitivities of mesoscale convective system (MCS) low-frequency gravity waves to changes in the vertical wind and thermodynamic profile through idealized cloud model simulations, highlighting how internal MCS processes impact low-frequency gravity wave generation, propagation, and environmental influence. Spectral analysis is performed on the rates of latent heat release, updraft velocity, and deep-tropospheric descent ahead of the convection as a signal for vertical wavenumber wave passage. Results show that perturbations in midlevel descent up to 100 km ahead of the MCS occur at the same frequency as gravity wave generation prompted by fluctuations in latent heat release due to the cellular variations of the MCS updrafts. Within a nocturnal environment, the frequency of the cellularity of the updrafts increases, subsequently increasing the frequency of wave generation. In an environment with low-level unidirectional shear, results indicate that wave generation mechanisms and environmental influence are similar among the simulated daytime and nocturnal MCSs. When deep vertical wind shear is incorporated, many of the low-frequency waves are strong enough to support cloud development ahead of the MCS as well as sustain and support convection.more » « less
