skip to main content

Explore Research Products in the NSF-PAR

Title: Exploring shear-induced segregation in controlled-velocity granular flows
Particle segregation in geophysical and industrial granular flows is typically driven by gravity and shear. While gravity-induced segregation is relatively well understood, shear-induced segregation is not. In particular, what controls segregation in the absence of gravity and the interplay between shearand gravity-driven segregation remain unclear. Here, we explore the shear-induced segregation force on an intruder particle in controlled-velocity granular flows where the shear profile is systematically varied. The shear-induced segregation force is found to be proportional to the shear rate gradient, which effectively pushes the large intruder from lower to higher shear rate regions. A scaling law is developed for the segregation force that is accurate over a wide range of overburden pressures and shear rates, and hence inertial numbers.  more » « less
Award ID(s):
1929265
NSF-PAR ID:
10289666
Author(s) / Creator(s):
; ; ;
Editor(s):
Aguirre, M.A.; Luding, S.; Pugnaloni, L.A.; Soto, R.
Date Published:
Journal Name:
EPJ Web of Conferences
Volume:
249
ISSN:
2100-014X
Page Range / eLocation ID:
03012
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ( , Journal of Fluid Mechanics)
    null (Ed.)
    Particle segregation is common in natural and industrial processes involving flowing granular materials. Complex, and seemingly contradictory, segregation phenomena have been observed for different boundary conditions and forcing. Using discrete element method simulations, we show that segregation of a single particle intruder can be described in a unified manner across different flow configurations. A scaling relation for the net segregation force is obtained by measuring forces on an intruder particle in controlled-velocity flows where gravity and flow kinematics are varied independently. The scaling law consists of two additive terms: a buoyancy-like gravity-induced pressure gradient term and a shear rate gradient term, both of which depend on the particle size ratio. The shear rate gradient term reflects a kinematics-driven mechanism whereby larger (smaller) intruders are pushed toward higher (lower) shear rate regions. The scaling is validated, without refitting, in wall-driven flows, inclined wall-driven flows, vertical silo flows, and free-surface flows down inclines. Comparing the segregation force with the intruder weight results in predictions of the segregation direction that match experimental and computational results for various flow configurations. 
    more » « less
  2. ; ; ; ( , Journal of Fluid Mechanics)
    The drag force on a spherical intruder in dense granular shear flows is studied using discrete element method simulations. Three regimes of the intruder dynamics are observed depending on the magnitude of the drag force (or the corresponding intruder velocity) and the flow inertial number: a fluctuation-dominated regime for small drag forces; a viscous regime for intermediate drag forces; and an inertial (cavity formation) regime for large drag forces. The transition from the viscous regime (linear force-velocity relation) to the inertial regime (quadratic force-velocity relation) depends further on the inertial number. Despite these distinct intruder dynamics, we find a quantitative similarity between the intruder drag in granular shear flows and the Stokesian drag on a sphere in a viscous fluid for intruder Reynolds numbers spanning five orders of magnitude. Beyond this first-order description, a modified Stokes drag model is developed that accounts for the secondary dependence of the drag coefficient on the inertial number and the intruder size and density ratios. When the drag model is coupled with a segregation force model for intruders in dense granular flows, it is possible to predict the velocity of gravity-driven segregation of an intruder particle in shear flow simulations. 
    more » « less
  3. ; ; ; ( , Journal of Fluid Mechanics)
    null (Ed.)
    Flowing granular materials segregate due to differences in particle size (driven by percolation) and density (driven by buoyancy). Modelling the segregation of mixtures of large/heavy particles and small/light particles is challenging due to the opposing effects of the two segregation mechanisms. Using discrete element method (DEM) simulations of combined size and density segregation we show that the segregation velocity is well described by a model that depends linearly on the local shear rate and quadratically on the species concentration for free surface flows. Concentration profiles predicted by incorporating this segregation velocity model into a continuum advection–diffusion–segregation transport model match DEM simulation results well for a wide range of particle size and density ratios. Most surprisingly, the DEM simulations and the segregation velocity model both show that the segregation direction for a range of size and density ratios depends on the local species concentration. This leads to a methodology to determine the combination of particle size ratio, density ratio and particle concentration for which a bidisperse mixture will not segregate. 
    more » « less
  4. ; ; ; ; ( , Journal of Fluid Mechanics)
    Using simulations and a virtual-spring-based approach, we measure the segregation force, $F_{seg},$ in size-bidisperse sphere mixtures over a range of concentrations, particle-size ratios and shear rates to develop a semiempirical model for $F_{seg}$ that extends its applicability from the well-studied non-interacting intruders regime to finite-concentration mixtures where cooperative phenomena occur. The model predicts the concentration below which the single-intruder assumption applies and provides an accurate description of the pressure partitioning between species. 
    more » « less
  5. ; ; ; ( , Journal of Fluid Mechanics)

    We study how channel width variations influence the dynamics of free-surface granular flows. For this purpose, we extend a continuum model framework to granular flows passing through channels that narrow or widen. Our theory uses a linearized approximation to an established dense granular flow rheology and a Coulomb friction law to model interaction between flow and sidewalls. We test the theoretical predictions using two novel 40 cm-diameter drums (convex and concave) filled halfway with 2 mm diameter particles rotated at rates in which the shear layer remains shallow and dense. We apply particle tracking velocimetry to enable quantitative comparisons between experimental data and theoretical predictions. We find that our experimental kinematics and energy profiles largely agree with the theoretical predictions. In general, flows through narrowing channels are faster and deeper than flows through widening channels. The influence of width variations grows with increasing flow speed, and the form of the rate dependence changes fundamentally as the regime changes from one in which kinetic energy is dissipated locally to one in which it is advected downstream. For both regimes, theoretical scaling analysis leads us to experimentally validated power laws, in which the exponent depends on the flow regime, and the multiplicative coefficient depends on channel geometry alone. Finally, we discuss how the differences between theoretical predictions and experimental data may be useful for improving our understanding of flows through non-uniform channels.

     
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email