BACKGROUND Electromagnetic (EM) waves underpin modern society in profound ways. They are used to carry information, enabling broadcast radio and television, mobile telecommunications, and ubiquitous access to data networks through Wi-Fi and form the backbone of our modern broadband internet through optical fibers. In fundamental physics, EM waves serve as an invaluable tool to probe objects from cosmic to atomic scales. For example, the Laser Interferometer Gravitational-Wave Observatory and atomic clocks, which are some of the most precise human-made instruments in the world, rely on EM waves to reach unprecedented accuracies. This has motivated decades of research to develop coherent EM sources over broad spectral ranges with impressive results: Frequencies in the range of tens of gigahertz (radio and microwave regimes) can readily be generated by electronic oscillators. Resonant tunneling diodes enable the generation of millimeter (mm) and terahertz (THz) waves, which span from tens of gigahertz to a few terahertz. At even higher frequencies, up to the petahertz level, which are usually defined as optical frequencies, coherent waves can be generated by solid-state and gas lasers. However, these approaches often suffer from narrow spectral bandwidths, because they usually rely on well-defined energy states of specific materials, which results in a rather limited spectral coverage. To overcome this limitation, nonlinear frequency-mixing strategies have been developed. These approaches shift the complexity from the EM source to nonresonant-based material effects. Particularly in the optical regime, a wealth of materials exist that support effects that are suitable for frequency mixing. Over the past two decades, the idea of manipulating these materials to form guiding structures (waveguides) has provided improvements in efficiency, miniaturization, and production scale and cost and has been widely implemented for diverse applications. ADVANCES Lithium niobate, a crystal that was first grown in 1949, is a particularly attractive photonic material for frequency mixing because of its favorable material properties. Bulk lithium niobate crystals and weakly confining waveguides have been used for decades for accessing different parts of the EM spectrum, from gigahertz to petahertz frequencies. Now, this material is experiencing renewed interest owing to the commercial availability of thin-film lithium niobate (TFLN). This integrated photonic material platform enables tight mode confinement, which results in frequency-mixing efficiency improvements by orders of magnitude while at the same time offering additional degrees of freedom for engineering the optical properties by using approaches such as dispersion engineering. Importantly, the large refractive index contrast of TFLN enables, for the first time, the realization of lithium niobate–based photonic integrated circuits on a wafer scale. OUTLOOK The broad spectral coverage, ultralow power requirements, and flexibilities of lithium niobate photonics in EM wave generation provides a large toolset to explore new device functionalities. Furthermore, the adoption of lithium niobate–integrated photonics in foundries is a promising approach to miniaturize essential bench-top optical systems using wafer scale production. Heterogeneous integration of active materials with lithium niobate has the potential to create integrated photonic circuits with rich functionalities. Applications such as high-speed communications, scalable quantum computing, artificial intelligence and neuromorphic computing, and compact optical clocks for satellites and precision sensing are expected to particularly benefit from these advances and provide a wealth of opportunities for commercial exploration. Also, bulk crystals and weakly confining waveguides in lithium niobate are expected to keep playing a crucial role in the near future because of their advantages in high-power and loss-sensitive quantum optics applications. As such, lithium niobate photonics holds great promise for unlocking the EM spectrum and reshaping information technologies for our society in the future. Lithium niobate spectral coverage. The EM spectral range and processes for generating EM frequencies when using lithium niobate (LN) for frequency mixing. AO, acousto-optic; AOM, acousto-optic modulation; χ (2) , second-order nonlinearity; χ (3) , third-order nonlinearity; EO, electro-optic; EOM, electro-optic modulation; HHG, high-harmonic generation; IR, infrared; OFC, optical frequency comb; OPO, optical paramedic oscillator; OR, optical rectification; SCG, supercontinuum generation; SHG, second-harmonic generation; UV, ultraviolet.
more »
« less
X-Band Aom on Chip
ilicon Nitride integrated photonic circuits have drawn much attention owing to its ultra-low loss and large Kerr nonlinearity. However, the lack of Pockels effect makes it difficult to be modulated electro-optically, which posts a major challenge for the further development of Si3N4 circuits with advanced functions. The widely adopted thermo-optical tuning suffers from large power consumption and restricted speed (~1 kHz). In this study, microwave frequency modulation (up to 9 GHz) of Si3N4 ring resonator is achieved by exciting bulk acoustic waves piezoelectrically, which modulates the microring via stress-optical effect. The acoustic waves are confined tightly in a released SiO2 thin film which enhances the acoustic energy density and thus modulation efficiency.
more »
« less
- Award ID(s):
- 1839164
- NSF-PAR ID:
- 10292064
- Date Published:
- Journal Name:
- 34th IEEE International Conference on Micro Electro Mechanical Systems (IEEE MEMS 2021)
- Page Range / eLocation ID:
- 210 - 213
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Integrated acousto-optic (AO) devices utilize the strong overlap of acoustic and optical fields in a waveguide to facilitate efficient photon–phonon (Brillouin) interactions. For example, acoustic waves offer a lossless modulation mechanism for light. “Brillouin active” photonic platforms are currently being developed that may see optical, acoustic, and AO waveguide circuits on the same chip, where guided light and sound come together in active interaction regions. A key missing component for such a platform is a device that can multiplex modes across these two physical domains. We propose and describe a new class of optical and acoustic components, the “acoustic–optical mode multiplexer” (AOMM), a device that takes respective optical and acoustic waveguides as input ports and couples their excited guided modes into a single, joint output waveguide. We show an example suspended silicon–silicon dioxide design that combines two optical modes and a spatially separate acoustic mode into a single, co-guided output port with low insertion loss down to 0.3 dB for both optical and acoustic modes, and reflection below
and , respectively. The AOMM may enable new, efficient integrated AO devices, such as isolators and circulators, where the acoustic wave generation and opto-acoustic interaction are separated. -
more » « less
Abstract Excitons are elementary optical excitation in semiconductors. The ability to manipulate and transport these quasiparticles would enable excitonic circuits and devices for quantum photonic technologies. Recently, interlayer excitons in 2D semiconductors have emerged as a promising candidate for engineering excitonic devices due to their long lifetime, large exciton binding energy, and gate tunability. However, the charge-neutral nature of the excitons leads to weak response to the in-plane electric field and thus inhibits transport beyond the diffusion length. Here, we demonstrate the directional transport of interlayer excitons in bilayer WSe2driven by the propagating potential traps induced by surface acoustic waves (SAW). We show that at 100 K, the SAW-driven excitonic transport is activated above a threshold acoustic power and reaches 20 μm, a distance at least ten times longer than the diffusion length and only limited by the device size. Temperature-dependent measurement reveals the transition from the diffusion-limited regime at low temperature to the acoustic field-driven regime at elevated temperature. Our work shows that acoustic waves are an effective, contact-free means to control exciton dynamics and transport, promising for realizing 2D materials-based excitonic devices such as exciton transistors, switches, and transducers up to room temperature.
-
more » « less
Abstract We report on scalable heterointegration of superconducting electrodes and epitaxial semiconductor quantum dots (QDs) on strong piezoelectric and optically nonlinear lithium niobate. The implemented processes combine the sputter-deposited thin film superconductor niobium nitride and III–V compound semiconductor membranes onto the host substrate. The superconducting thin film is employed as a zero-resistivity electrode material for a surface acoustic wave resonator with internal quality factors
-
Refracto-vibrometry is a technique that uses a laser Doppler vibrometer to measure acoustic pressure fields. The vibrometer laser is directed through a medium towards a stationary retroreflective surface. Acoustic waves (density variations) for which the wavefronts pass through the laser, as the beam travels from the vibrometer to the retroreflector and back, cause variations in the integrated optical path length. This results in a time-varying modulation of the laser signal returning to the vibrometer, enabling optical detection of the acoustic wavefronts. In the current experiment, a Polytec PSV-400 scanning laser Doppler vibrometer, sampled at 100 MHz, monitored the waves emitted by a 1 MHz Panametrics V303 ultrasound transducer immersed in a water tank. The time-varying signal detected by the vibrometer at numerous scan points was used to generate videos of the time evolution of acoustic wavefronts; these videos will be presented. Refracto-vibrometry was also used for optical measurements of the time of flight of ultrasonic waves through different materials, including samples of lead and fabricated bone. This enabled determination of wave propagation speeds. The wave speeds obtained with optical detection using refracto-vibrometry were in agreement with measurements using a conventional ultrasonic transducer to detect the wavefronts.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1109/MEMS51782.2021.9375395
