- NSF-PAR ID:
- 10319502
- Date Published:
- Journal Name:
- Polymer Chemistry
- Volume:
- 13
- Issue:
- 7
- ISSN:
- 1759-9954
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Photoinduced atom transfer radical polymerization (photo-ATRP) has risen to the forefront of modern polymer chemistry as a powerful tool giving access to well-defined materials with complex architecture. However, most photo-ATRP systems can only generate radicals under biocidal UV light and are oxygen-sensitive, hindering their practical use in the synthesis of polymer biohybrids. Herein, inspired by the photoinduced electron transfer-reversible addition–fragmentation chain transfer (PET-RAFT) polymerization, we demonstrate a dual photoredox/copper catalysis that allows open-air ATRP under green light irradiation. Eosin Y was used as an organic photoredox catalyst (PC) in combination with a copper complex (X–Cu II /L). The role of PC was to trigger and drive the polymerization, while X–Cu II /L acted as a deactivator, providing a well-controlled polymerization. The excited PC was oxidatively quenched by X–Cu II /L, generating Cu I /L activator and PC˙ + . The ATRP ligand (L) used in excess then reduced the PC˙ + , closing the photocatalytic cycle. The continuous reduction of X–Cu II /L back to Cu I /L by excited PC provided high oxygen tolerance. As a result, a well-controlled and rapid ATRP could proceed even in an open vessel despite continuous oxygen diffusion. This method allowed the synthesis of polymers with narrow molecular weight distributions and controlled molecular weights using Cu catalyst and PC at ppm levels in both aqueous and organic media. A detailed comparison of photo-ATRP with PET-RAFT polymerization revealed the superiority of dual photoredox/copper catalysis under biologically relevant conditions. The kinetic studies and fluorescence measurements indicated that in the absence of the X–Cu II /L complex, green light irradiation caused faster photobleaching of eosin Y, leading to inhibition of PET-RAFT polymerization. Importantly, PET-RAFT polymerizations showed significantly higher dispersity values (1.14 ≤ Đ ≤ 4.01) in contrast to photo-ATRP (1.15 ≤ Đ ≤ 1.22) under identical conditions.more » « less
-
null (Ed.)The stringent control over the polymerization of less activated monomers remains one major challenge for Reversible Deactivation Radical Polymerizations (RDRP), including Atom Transfer Radical Polymerization (ATRP). Electrochemically mediated ATRP ( e ATRP) of a gaseous monomer, vinyl chloride (VC), was successfully achieved for the first time using a stainless-steel 304 (SS304) electrochemical reactor equipped with a simplified electrochemical setup. Controlled polymerizations were confirmed by the good agreement between theoretical and measured molecular weights, as well as the relatively narrow molecular weight distributions. Preservation of chain-end fidelity was verified by chain extension experiments, yielding poly(vinyl chloride) (PVC) homopolymers, block and statistical copolymers. The possibility of synthesizing PVC by e ATRP is a promising alternative to afford cleaner (co)polymers, with low catalyst concentration. The metal body of the reactor was also successfully used as a cathode. The setup proposed in this contribution opens an avenue for the polymerization of other gaseous monomers.more » « less
-
Molecular weight distributions (MWD) have a substantial impact on a diverse set of polymer physical and rheological properties, from processability and stiffness to many aspects of block copolymer microphase behavior. The precise MWD compositions of these polymers can be modularly controlled through temporal initiation in anionic polymerizations by metered addition of a discrete initiating species. With the technique described in this work, we identify initiator addition profiles through theoretical modeling which can be used to prepare any desired arbitrary MWD. This kinetic model reproduces experimental MWDs with high fidelity. Our modeling strategy incorporates a detailed kinetic description of polymer initiation and propagation, including the association and dissociation equilibria of the living polymer chain ends. We simplify the kinetic model by incorporating the aggregation phenomena into an effective propagation rate constant k p , allowing it to vary with the polymer chain length ( i ). Importantly, this model also yields the ability to predict MWDs at any arbitrary value of monomer conversion during the polymerization. Lastly, we simulate MWDs for a variety of new, yet unmeasured, initiator addition profiles, demonstrating the predictability of this approach.more » « less
-
Abstract Mechanical initiation of polymerization offers the chance to generate polymers in new environments using an energy source with unique capabilities. Recently, a renewed interest in mechanically controlled polymerization has yielded many techniques for controlled radical polymerization by ultrasound. However, other types of polymerizations induced by mechanical activation are rare, especially for generating high‐molecular‐weight polymers. Herein is an example of using piezoelectric ZnO nanoparticles to generate free‐radical species that initiate chain‐growth polymerization and polymer crosslinking. The fast generation of high amounts of reactive radicals enable the formation of polymer/gel by ultrasound activation. This chemistry can be used to harness mechanical energy for constructive purposes in polymeric materials and for controlled polymerizations for bulk‐scale reactions.
-
Abstract Mechanical initiation of polymerization offers the chance to generate polymers in new environments using an energy source with unique capabilities. Recently, a renewed interest in mechanically controlled polymerization has yielded many techniques for controlled radical polymerization by ultrasound. However, other types of polymerizations induced by mechanical activation are rare, especially for generating high‐molecular‐weight polymers. Herein is an example of using piezoelectric ZnO nanoparticles to generate free‐radical species that initiate chain‐growth polymerization and polymer crosslinking. The fast generation of high amounts of reactive radicals enable the formation of polymer/gel by ultrasound activation. This chemistry can be used to harness mechanical energy for constructive purposes in polymeric materials and for controlled polymerizations for bulk‐scale reactions.