More Like this

1. EE-ACML: Energy-Efficient Adiabatic CMOS/MTJ Logic for CPA-Resistant IoT Devices

   https://doi.org/10.3390/s21227651  

   Kahleifeh, Zachary ; Thapliyal, Himanshu ( November 2021 , Sensors)

   Internet of Things (IoT) devices have strict energy constraints as they often operate on a battery supply. The cryptographic operations within IoT devices consume substantial energy and are vulnerable to a class of hardware attacks known as side-channel attacks. To reduce the energy consumption and defend against side-channel attacks, we propose combining adiabatic logic and Magnetic Tunnel Junctions to form our novel Energy Efficient-Adiabatic CMOS/MTJ Logic (EE-ACML). EE-ACML is shown to be both low energy and secure when compared to existing CMOS/MTJ architectures. EE-ACML reduces dynamic energy consumption with adiabatic logic, while MTJs reduce the leakage power of a circuit. To show practical functionality and energy savings, we designed one round of PRESENT-80 with the proposed EE-ACML integrated with an adiabatic clock generator. The proposed EE-ACML-based PRESENT-80 showed energy savings of 67.24% at 25 MHz and 86.5% at 100 MHz when compared with a previously proposed CMOS/MTJ circuit. Furthermore, we performed a CPA attack on our proposed design, and the key was kept secret. 

   more » « less
2. 2-Phase Energy-Efficient Secure Positive Feedback Adiabatic Logic for CPA-Resistant IoT Devices

   https://doi.org/10.1109/WF-IoT48130.2020.9221065  

   Kahleifeh, Zachary ; Thapliyal, Himanshu ( June 2020 , 2020 IEEE 6th World Forum on Internet of Things (WF-IoT))

   null (Ed.)

   Internet of Things (IoT) devices are mostly areas constrained and operate on a limited battery supply and therefore have tight energy budgets. Lightweight cryptography (LWC) such as PRESENT-80 allows for minimal area usage and low energy for secure operations. However, CMOS implemented LWCs are vulnerable to side-channel attacks such as Correlation Power Analysis (CPA). Adiabatic Logic is an emerging circuit design technique that can reduce energy consumption and be CPA resistant. Many existing adiabatic logic families use a 4-phase clocking scheme which pays a large area penalty. Thus, in this paper, we propose 2-EE-SPFAL, a 2-phase clocking scheme implementation of an existing adiabatic family known as EE-SPFAL. We explore 2-phase sinusoidal waves in terms of energy efficiency and security. To demonstrate energy savings and security against CPA attacks we construct one round of PRESENT-80 in both CMOS and 2-EE-SPFAL. Simulations were conducted using 45nm technology in Cadence Spectre. At 12.5MHz, our results show an average energy saving of 50% between CMOS and 2-EE-SPFAL. Furthermore, we performed a CPA attack on both the CMOS and 2-EE-SPFAL implementation and determined that the CMOS key could be retrieved while the adiabatic key was kept hidden. 

   more » « less
3. 2-SPGAL: 2-Phase Symmetric Pass Gate Adiabatic Logic for Energy-Efficient Secure Consumer IoT

   https://doi.org/10.1109/ICCE50685.2021.9427720  

   Degada, Amit ; Thapliyal, Himanshu ( January 2021 , 2021 IEEE International Conference on Consumer Electronics (ICCE))

   null (Ed.)

   The adaptation of the Internet-of-Things (IoT) for consumer electronics has enabled us to uplift everyday life. Low-power smart and secure computing devices are needed to sustain the expected growth of consumer IoT. Adiabatic switching is a modern approach that recycles the energy stored in load capacitance to save energy. Further, the cryptographic circuit designed using adiabatic switching is secure against the Correlation Power Analysis (CPA) attack in contrast to the same circuit designed using standard CMOS. In this paper, we propose 2-SPGAL, a 2-phase sinusoidal signal based clocking implementation of Symmetric Pass Gate Adiabatic Logic (SPGAL). As a case study, we simulated the design of PRESENT-80 (a lightweight cryptographic scheme) one round with an in-built Power Clock Generator (PCG) with 45nm technology. The 2-SPGAL shows on an average 82.76% and 67.35% better energy saving compared to standard CMOS, and 2-EE-SPFAL (another 2-phase adiabatic logic), respectively at a frequency range from 100 kHz to 25 MHz with a load of 1 fF. The 2-SPGAL has 16.78% savings of the number of transistors compared to 2-EE-SPFAL for implementation of one round PRESENT-80. Further, the CPA attacks reveal the key in standard CMOS, however, 2-SPGAL PRESENT-80 adiabatic logic design was successful to protect the key. 

   more » « less
4. Approximate Adiabatic Logic for Low-Power and Secure Edge Computing

   https://doi.org/10.1109/MCE.2021.3053908  

   Yang, Wu ; Thapliyal, Himanshu ( January 2021 , IEEE Consumer Electronics Magazine)

   null (Ed.)

   Approximate computing is a promising approach for error-tolerant applications running on the Internet of Things (IoT) edge devices to reduce power consumption. However, approximate computation is susceptible to side-channel attacks, such as attacks based on differential power analysis (DPA). Energy efficiency could be further enhanced by applying adiabatic logic in approximate edge computing while increasing its protection against the side-channel attacks. As a case study, we are presenting two approximate adders based on adiabatic logic to illustrate the benefits of approximate computation combined with adiabatic logic. The proposed approximate adders leverage the dual-rail property of adiabatic logic to minimize the overall size and further decrease energy consumption. In this article, the first design is True Sum Approximate Adder (TSAA), while the second design is True Carry-out Approximate Adder (TCAA). There are fewer transistors in adiabatic logic-based TSAA and TCAA compared to CMOS based accurate mirror adder (AMA). At 12.5 MHz operating frequency and 45 nm technology node, the adiabatic TSAA and TCAA achieved power savings of 95.4% and 95.48%, energy savings of 90.80%, and 90.96% in comparison with the standard CMOS AMA. We also show that both designs proposed are more secure against DPA attacks. 

   more » « less
5. 2-Phase Adiabatic Logic For Low-Energy and CPA-Resistant Implantable Medical Devices

   https://doi.org/10.1109/TCE.2022.3141342  

   Degada, Amit ; Thapliyal, Himanshu ( January 2022 , IEEE Transactions on Consumer Electronics)

   Designing a low-energy and secure lightweight cryptographic coprocessor is the primary design constraint for modern wireless Implantable Medical Devices (IMDs). The lightweight cryptographic ciphers are the preferred cryptographic solution for low-energy encryption. This article proposes 2-SPGAL, the 2-phase sinusoidal clocking implementation of Symmetric Pass Gate Adiabatic Logic (SPGAL) for IMDs. The proposed 2-SPGAL is energy-efficient and secure against the Correlation Power Analysis (CPA) attack. The proposed 2-SPGAL was evaluated with the integration of synchronous resonant Power Clock Generators (PCGs): (i) 2N2P-PCG, and (ii) 2N-PCG. The case study implementation of one round of PRESENT-80 encryption using 2-SPGAL, with 2N2P-PCG integrated into the design, shows an average of 47.50% of energy saving compared to its CMOS counterpart, over the frequency range of 50 kHz to 250 kHz. The same 2-SPGAL based case study, with 2N-PCG integrated into the design, shows 51.18% of an average energy saving compared to its CMOS counterpart, over 50 kHz to 250 kHz. Further, the 2-SPGAL based PRESENT- 80 one round shows an average energy saving of 16.62% and 28.90% respectively for 2N2P-PCG and 2N-PCG integrated into the design compared to existing 2-phase adiabatic logic called 2- EE-SPFAL. We also subjected PRESENT-80 design of 2-SPGAL and CMOS against CPA attack. The 2-SPGAL, with 2N2P-PCG and 2N-PCG, integrated into one round of PRESENT-80 design protects the encryption key. However, the encryption key was successfully revealed in one round of PRESENT-80 design using CMOS logic. Therefore, the proposed 2-SPGAL logic can be useful to design energy-efficient and CPA resilient Implantable Medical Devices (IMDs). 

   more » « less