An official website of the United States government
Configured with a rapid evaporation rate and a high photothermal conversion efficiency, solar-driven interfacial evaporation displays considerable promise for seawater desalination. Inspired by the versatility and deployability of origami-based structures, we demonstrate a portable waterbomb origami pattern-based tower-like structure, named an “origami tower”, as a convertible photothermal evaporator floating on water for efficient solar-driven interfacial desalination. The origami tower has predictable deformability, featuring reversible radial expansion and contraction radially accompanied by small changes in the axial direction. The reversible adjustability of the origami tower offers convenience for transportation and storage, while the quick expansion into its tower shape provides rapid deployment capabilities. Benefiting from an enlarged evaporation surface, excellent light trapping ability, and heat localization, the origami-tower photothermal evaporator yields an evaporation rate of 2.67 kg m −2 h −1 under one sun illumination. This reversible 3D origami-based photothermal evaporator opens a new avenue for building a portable and efficient solar thermal desalination system.
more »
« less
Seawater desalination derived entirely from ocean biomass
Solar-driven interfacial evaporation shows great prospects for seawater desalination with its rapid fast evaporation rate and high photothermal conversion efficiency. Here, a sustainable, biodegradable, non-toxic, and highly efficient full ocean biomass-based solar-driven evaporator is reported, which is composed of chitosan (CS) hydrogel as the hydratable skeleton and cuttlefish ink (CI) as the photothermal material. Under solar irradiation, the cuttlefish ink powder harvests solar energy and heats the surrounding water. Simultaneously, the water in the three-dimensional network of chitosan hydrogel is rapidly replenished by the interconnected porous structure and the hydrophilic functional groups attached to the polymer chains. With its enlarged evaporation surface, high solar absorptance, adequate water transportation, good salt drainage, and heat localization, the CI/CS-based evaporator achieves a remarkable evaporation rate of 4.1 kg m −2 h −1 under one sun irradiance (1 kW m −2 ) with high-quality freshwater yields. This full ocean biomass-based evaporator with abundant raw material availability provides new possibilities for an efficient, stable, sustainable, and environmentally friendly solar evaporator with guaranteed water quality.
more »
« less
- PAR ID:
- 10323743
- Date Published:
- Journal Name:
- Journal of Materials Chemistry A
- Volume:
- 9
- Issue:
- 39
- ISSN:
- 2050-7488
- Page Range / eLocation ID:
- 22313 to 22324
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Solar steam generation technologies have gained increasing attention due to their great potential for clean water generation with low energy consumption. The rational design of a light absorber that can maximize solar energy utilization is therefore of great importance. Here, the synthesis of Ni@C@SiO2core–shell nanoparticles as promising light absorbers for steam generation by taking advantage of the plasmonic excitation of Ni nanoparticles, the broadband absorption of carbon, and the protective function and hydrophilic property of silica is reported. The nanoparticle‐based evaporator shows an excellent photothermal efficiency of 91.2%, with an evaporation rate of 1.67 kg m−2 h−1. The performance can be further enhanced by incorporating the nanoparticles into a polyvinyl alcohol hydrogel to make a composite film. In addition, utilizing the magnetic property of the core–shell particles allows the creation of surface texture in the film by applying an external magnetic field, which helps increase surface roughness and further boost the evaporation rate to as high as 2.25 kg m−2 h−1.more » « less
-
Solar-thermal evaporation is a promising technology for energy-efficient desalination, but salt accumulation on solar absorbers and system longevity are the major challenges that hinder its widespread application. In this study, we present a sustainable Janus wood evaporator that overcomes these challenges and achieves a record-high evaporation efficiencies in hypersaline water, one of the most difficult water sources to treat via desalination. The Janus wood evaporator has asymmetric surface wettability, where the top layer acts as a hydrophobic solar absorber with water blockage and salt resistance, while the bottom hydrophilic wood layer allows for rapid water replenishment and superior thermal insulation. An evaporation efficiency of 82.0% is achieved for 20% NaCl solution under 1 sun, and persistent salt-resistance is observed during a 10-cycle long-term test. To ensure the environmental impact of the Janus wood evaporator, for the first time, a life cycle assessment (LCA) is conducted to compare this Janus wood evaporator with the emerging Janus evaporators, indicating a functional and more sustainable opportunity for off-grid desalination and humanitarian efforts.more » « less
-
Abstract Solar‐driven steam generation, whereby solar energy is harvested to purify water directly, is emerging as a promising approach to mitigate the worldwide water crisis. The scalable application of conventional 3D evaporators is hindered by their complex spatial geometries. A 2.5D structure is a spatial extension of a 2D structure with an addition of a third vertical dimension, achieving both the feasibility of 2D structure and the performance of 3D structure simultaneously. Here, an interconnected open‐pore 2.5D Cu/CuO foam‐based photothermal evaporator capable of achieving a high evaporation rate of 4.1 kg m−2h−1under one sun illumination by exposing one end of the planar structure to air is demonstrated. The micro‐sized open‐pore structure of Cu/CuO foam allows it to trap incident sunlight, and the densely distributed blade‐like CuO nanostructures effectively scatter sunlight inside pores simultaneously. The inherent hydrophilicity of CuO and capillarity forces from the porous structure of Cu foam continuously supply sufficient water. Moreover, the doubled working sides of Cu/CuO foam enlarge the exposure area enabling efficient vapor diffusion. The feasible fabrication process and the combined structural features of Cu/CuO foam offer new insight into the future development of solar‐driven evaporators in large‐scale applications with practical durability.more » « less
-
We introduce the facile one-step biosynthesis of a bilayer structured hydrogel composite of reduced-graphene oxide (rGO) and bacterial nanocellulose (BNC) for multiple photothermal water treatment applications. One-step in situ biosynthesis of a bilayered hydrogel was achieved via modification of BNC growth medium supplemented with an optimized concentration of corn steep liquor as a growth enhancer. A two-stage, growth rate-controlled formation mechanism for the bilayer structure was revealed. The final cleaned and freeze-dried reduced-GO embedded BNC bilayer membrane enables versatile applications such as filtration (tested using gold nanoparticles, Escherichia coli cells, and plasmid DNA), photothermal disinfection of entrapped E. coli , and solar water evaporation. Comparable particle rejection (up to ≈4 nm) and water flux (146 L h −1 m −2 ) to ultrafiltration were observed. Entrapment and photothermal inactivation of E. coli cells were accomplished within 10 min of solar exposure (one sun). Such treatment can potentially suppress membrane biofouling. The steam generation capacity was 1.96 kg m −2 h −1 . Our simple and scalable approach opens a new path for biosynthesis of nanostructured materials for environmental and biomedical applications.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D1TA05068K
