skip to main content

Explore Research Products in the NSF-PAR

  • NSF Public Access
  • Search Results
  • Flow rate–pressure drop relation for shear-thinning fluids in narrow channels: approximate solutions and comparison with experiments
Title: Flow rate–pressure drop relation for shear-thinning fluids in narrow channels: approximate solutions and comparison with experiments
Non-Newtonian fluids are characterized by complex rheological behaviour that affects the hydrodynamic features, such as the flow rate–pressure drop relation. While flow rate–pressure drop measurements of such fluids are common in the literature, a comparison of experimental data with theory is rare, even for shear-thinning fluids at low Reynolds number, presumably due to the lack of analytical expressions for the flow rate–pressure drop relation covering the entire range of pressures and flow rates. Such a comparison, however, is of fundamental importance as it may provide insight into the adequacy of the constitutive model that was used and the values of the rheological parameters. In this work, we present a theoretical approach to calculating the flow rate–pressure drop relation of shear-thinning fluids in long, narrow channels that can be used for comparison with experimental measurements. We utilize the Carreau constitutive model and provide a semi-analytical expression for the flow rate–pressure drop relation. In particular, we derive three asymptotic solutions for small, intermediate and large values of the dimensionless pressures or flow rates, which agree with distinct limits previously known and allow us to approximate analytically the entire flow rate–pressure drop curve. We compare our semi-analytical and asymptotic results with the experimental measurements of Pipe et al. ( Rheol. Acta , vol. 47, 2008, pp. 621–642) and find excellent agreement. Our results rationalize the change in the slope of the flow rate–pressure drop data, when reported in log–log coordinates, at high flow rates, which cannot be explained using a simple power-law model.  more » « less
Award ID(s):
2011750
NSF-PAR ID:
10324981
Author(s) / Creator(s):
;
Date Published:
Journal Name:
Journal of Fluid Mechanics
Volume:
923
ISSN:
0022-1120
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ( , Journal of Non-Newtonian Fluid Mechanics)
    Poole, Robert J (Ed.)
    The FENE-P (Finitely-Extensible Nonlinear Elastic) dumbbell constitutive equation is widely used in simulations and stability analyses of free and wall-bounded viscoelastic shear flows due to its relative simplicity and accuracy in predicting macroscopic properties of dilute polymer solutions. The model contains three independent material parameters, which expressed in dimensionless form correspond to a Weissenberg number (Wi), i.e., the ratio of the dumbbell relaxation time scale to a characteristic flow time scale, a finite extensibility parameter (L), corresponding to the ratio of the fully extended dumbbell length to the root mean square end-to-end separation of the polymer chain under equilibrium conditions, and a solvent viscosity ratio. An exact solution for the rheological predictions of the FENE-P model in steady simple shear flow is available [Sureshkumar et al., Phys Fluids (1997)], but the resulting nonlinear and nested set of equations do not readily reveal the key shear-thinning physics that dominates at high Wi as a result of the finite extensibility of the polymer chain. In this note we review a simple way of evaluating the steady material functions characterizing the nonlinear evolution of the polymeric contributions to the shear stress and first normal stress difference as the shear rate increases, provide asymptotic expansions as a function of Wi , and show that it is in fact possible to construct universal master curves for these two material functions as well as the corresponding stress ratio. Steady shear flow experiments on three highly elastic dilute polymer solutions of different finite extensibilities also follow the identified master curves. The governing dimensionless parameter for these master curves is Wi/L and it is only in strong shear flows exceeding Wi/L > 1 that the effects of finite extensibility of the polymer chains dominate the evolution of polymeric stresses in the flow field. We suggest that reporting the magnitude of Wi/L when performing stability analyses or simulating shear-dominated flows with the FENE-P model will help clarify finite extensibility effects. 
    more » « less
  2. ; ( , Journal of Fluid Mechanics)
    We analyse the pressure-driven flow of the Oldroyd-B fluid in slowly varying arbitrarily shaped, narrow channels and present a theoretical framework for calculating the relationship between the flow rate $q$ and pressure drop $\Delta p$ . We first identify the characteristic scales and dimensionless parameters governing the flow in the lubrication limit. Employing a perturbation expansion in powers of the Deborah number ( $De$ ), we provide analytical expressions for the velocity, stress and the $q$ – $\Delta p$ relation in the weakly viscoelastic limit up to $O(De^2)$ . Furthermore, we exploit the reciprocal theorem derived by Boyko $\&$ Stone ( Phys. Rev. Fluids , vol. 6, 2021, L081301) to obtain the $q$ – $\Delta p$ relation at the next order, $O(De^3)$ , using only the velocity and stress fields at the previous orders. We validate our analytical results with two-dimensional numerical simulations in the case of a hyperbolic, symmetric contracting channel and find excellent agreement. While the velocity remains approximately Newtonian in the weakly viscoelastic limit (i.e. the theorem of Tanner and Pipkin), we reveal that the pressure drop strongly depends on the viscoelastic effects and decreases with $De$ . We elucidate the relative importance of different terms in the momentum equation contributing to the pressure drop along the symmetry line and identify that a pressure drop reduction for narrow contracting geometries is primarily due to gradients in the viscoelastic shear stresses. We further show that, although for narrow geometries the viscoelastic axial stresses are negligible along the symmetry line, they are comparable or larger than shear stresses in the rest of the domain. 
    more » « less
  3. ; ( , Journal of Rheology)
    We examine linear and nonlinear shear and extensional rheological properties using a “micelle-slip-spring model” [T. Sato et al., J. Rheol. 64, 1045–1061 (2020)] that incorporates breakage and rejoining events into the slip-spring model originally developed by Likhtman [Macromolecules 38, 6128–6139 (2005)] for unbreakable polymers. We here employ the Fraenkel potential for main chain springs and slip-springs to address the effect of finite extensibility. Moreover, to improve extensional properties under a strong extensional flow, stress-induced micelle breakage (SIMB) is incorporated into the micelle-slip-spring model. Thus, this model is the first model that includes the entanglement constraint, Rouse modes, finite extensibility, breakage and rejoining events, and stress-induced micelle breakage. Computational expense currently limits the model to micellar solutions with moderate numbers of entanglements ([Formula: see text]), but for such solutions, nearly quantitative agreement is attained for the start-up of the shearing flow. The model in the extensional flow cannot yet be tested owing to the lack of data for this entanglement level. The transient and steady shear properties predicted by the micelle-slip-spring model for a moderate shear rate region without significant chain stretch are fit well by the Giesekus model but not by the Phan–Thien/Tanner (PTT) model, which is consistent with the ability of the Giesekus model to match experimental shear data. The extensional viscosities obtained by the micelle-slip-spring model with SIMB show thickening followed by thinning, which is in qualitative agreement with experimental trends. Additionally, the extensional rheological properties of the micelle-slip-spring model with or without SIMB are poorly predicted by both the Giesekus and the PTT models using a single nonlinear parameter. Thus, future work should seek a constitutive model able to capture the behavior of the slip-spring model in shear and extensional flows and so provide an accurate, efficient model of micellar solution rheology. 
    more » « less
  4. ; ; ; ; ; ; ( , Journal of Rheology)

    Mud is a suspension of fine-grained particles (sand, silt, and clay) in water. The interaction of clay minerals in mud gives rise to complex rheological behaviors, such as yield stress, thixotropy, and viscoelasticity. Here, we experimentally examine the flow behaviors of kaolinite clay suspensions, a model mud, using steady shear rheometry. The flow curves exhibit both yield stress and rheological hysteresis behaviors for various kaolinite volume fractions (ϕk). Further understanding of these behaviors requires fitting to existing constitutive models, which is challenging due to numerous fitting parameters. To this end, we employ a Bayesian inference method, Markov chain Monte Carlo, to fit the experimental flow curves to a microstructural viscoelastic model. The method allows us to estimate the rheological properties of the clay suspensions, such as viscosity, yield stress, and relaxation time scales. The comparison of the inherent relaxation time scales suggests that kaolinite clay suspensions are strongly viscoelastic and weakly thixotropic at relatively low ϕk, while being almost inelastic and purely thixotropic at high ϕk. Overall, our results provide a framework for predictive model fitting to elucidate the rheological behaviors of natural materials and other structured fluids.

     
    more » « less
  5. ; ; ; ( , Journal of Rheology)

    We investigate the rheological behavior of athermal particle suspensions using experiments and theory. A generalized version of the homogenization estimates of Ponte Castañeda and Willis [J. Mech. Phys. Solids, 43(12), 1919–1951 (1995)] is presented for the effective viscosity of athermal suspensions accounting for additional microstructural features (e.g., polydispersity) via an empirical parameter, [Formula: see text]. For the case of identically sized spheres dispersed with statistical isotropy in a Newtonian fluid, the parameter [Formula: see text] is estimated from the results of Batchelor and Green [J. Fluid Mech. 56(2), 375–400 (1972)] for the Huggins coefficient. Predictions for the macroscopic viscosity are found to be in good agreement with measurements for monodisperse polymethyl methacrylate (PMMA) spheres in glycerol, as well as for the empirical Krieger–Dougherty equation for the shear viscosity. The proposed estimates have the added benefit that they can also be used to get information on the statistics of the stress and strain-rate fields in the fluid and particle phases. In addition, results for the effective shear viscosity are used in combination with the linear comparison method of Ponte Castañeda [J. Mech. Phys. Solids 39(1), 45–71 (1991)] to generate the corresponding estimates for the effective macroscopic behavior and field statistics of particle suspensions in (viscoplastic) yield stress fluids. Good agreement is also found between the theoretical estimates and experimental results for the effective yield and flow stress of suspensions with monodisperse PMMA spheres in Carbopol. Finally, it is argued that the results for the phase averages and fluctuations of the stress and strain-rate fields can be used to provide a physical interpretation for the parameter [Formula: see text] in terms of the polydispersity of the suspension and its implications for the percolation threshold.

     
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email