An official website of the United States government
Sharing and joint processing of camera feeds and sensor measurements, known as Cooperative Perception (CP), has emerged as a new technique to achieve higher perception qualities. CP can enhance the safety of Autonomous Vehicles (AVs) where their individual visual perception quality is compromised by adverse weather conditions (haze as foggy weather), low illumination, winding roads, and crowded traffic. While previous CP methods have shown success in elevating perception quality, they often assume perfect communication conditions and unlimited transmission resources to share camera feeds, which may not hold in real-world scenarios. Also, they make no effort to select better helpers when multiple options are available.To cover the limitations of former methods, in this paper, we propose a novel approach to realize an optimized CP under constrained communications. At the core of our approach is recruiting the best helper from the available list of front vehicles to augment the visual range and enhance the Object Detection (OD) accuracy of the ego vehicle. In this two-step process, we first select the helper vehicles that contribute the most to CP based on their visual range and lowest motion blur. Next, we implement a radio block optimization among the candidate vehicles to further improve communication efficiency. We specifically focus on pedestrian detection as an exemplary scenario. To validate our approach, we used the CARLA simulator to create a dataset of annotated videos for different driving scenarios where pedestrian detection is challenging for an AV with compromised vision. Our results demonstrate the efficacy of our two-step optimization process in improving the overall performance of cooperative perception in challenging scenarios, substantially improving driving safety under adverse conditions. Finally, we note that the networking assumptions are adopted from LTE Release 14 Mode 4 side-link communication, commonly used for Vehicle-to-Vehicle (V2V) commun
more »
« less
Beamforming and Scalable Image Processing in Vehicle-to-Vehicle Networks
Vehicle to Vehicle (V2V) communication allows vehicles to wirelessly exchange information on the surrounding environment and enables cooperative perception. It helps prevent accidents, increase the safety of the passengers, and improve the traffic flow efficiency. However, these benefits can only come when the vehicles can communicate with each other in a fast and reliable manner. Therefore, we investigated two areas to improve the communication quality of V2V: First, using beamforming to increase the bandwidth of V2V communication by establishing accurate and stable collaborative beam connection between vehicles on the road; second, ensuring scalable transmission to decrease the amount of data to be transmitted, thus reduce the bandwidth requirements needed for collaborative perception of autonomous driving vehicles. Beamforming in V2V communication can be achieved by utilizing image-based and LIDAR’s 3D data-based vehicle detection and tracking. For vehicle detection and tracking simulation, we tested the Single Shot Multibox Detector deep learning-based object detection method that can achieve a mean Average Precision of 0.837 and the Kalman filter for tracking. For scalable transmission, we simulate the effect of varying pixel resolutions as well as different image compression techniques on the file size of data. Results show that without compression, the file size for only transmitting the bounding boxes containing detected object is up to 10 times less than the original file size. Similar results are also observed when the file is compressed by lossless and lossy compression to varying degrees. Based on these findings using existing databases, the impact of these compression methods and methods of effectively combining feature maps on the performance of object detection and tracking models will be further tested in the real-world autonomous driving system.
more »
« less
- Award ID(s):
- 2010366
- PAR ID:
- 10327383
- Date Published:
- Journal Name:
- Journal of Signal Processing Systems
- ISSN:
- 1939-8018
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Collaborative perception enables autonomous driving vehicles to share sensing or perception data via broadcast-based vehicle-to-everything (V2X) communication technologies such as Cellular-V2X (C-V2X), hoping to enable accurate perception in face of inaccurate perception results by each individual vehicle. Nevertheless, the V2X communication channel remains a significant bottleneck to the performance and usefulness of collaborative perception due to limited bandwidth and ad hoc communication scheduling. In this paper, we explore challenges and design choices for V2X-based collaborative perception, and propose an architecture that lever-ages the power of edge computing such as road-side units for central communication scheduling. Using NS-3 simulations, we show the performance gap between distributed and centralized C-V2X scheduling in terms of achievable throughput and communication efficiency, and explore scenarios where edge assistance is beneficial or even necessary for collaborative perception.more » « less
-
Occlusion is a critical problem in the Autonomous Driving System. Solving this problem requires robust collaboration among autonomous vehicles traveling on the same roads. However, transferring the entirety of raw sensors' data among autonomous vehicles is expensive and can cause a delay in communication. This paper proposes a method called Realtime Collaborative Vehicular Communication based on Bird's-Eye-View (BEV) map. The BEV map holds the accurate depth information from the point cloud image while its 2D representation enables the method to use a novel and well-trained image-based backbone network. Most importantly, we encode the object detection results into the BEV representation to reduce the volume of data transmission and make real-time collaboration between autonomous vehicles possible. The output of this process, the BEV map, can also be used as direct input to most route planning modules. Numerical results show that this novel method can increase the accuracy of object detection by cross-verifying the results from multiple points of view. Thus, in the process, this new method also reduces the object detection challenges that stem from occlusion and partial occlusion. Additionally, different from many existing methods, this new method significantly reduces the data needed for transfer between vehicles, achieving a speed of 21.92 Hz for both the object detection process and the data transmission process, which is sufficiently fast for a real-time system.more » « less
-
null (Ed.)Connected Autonomous Vehicular (CAV) platoon refers to a group of vehicles that coordinate their movements and operate as a single unit. The vehicle at the head acts as the leader of the platoon and determines the course of the vehicles following it. The follower vehicles utilize Vehicle-to-Vehicle (V2V) communication and automated driving support systems to automatically maintain a small fixed distance between each other. Reliance on V2V communication exposes platoons to several possible malicious attacks which can compromise the safety, stability, and efficiency of the vehicles. We present a novel distributed resiliency architecture, RePLACe for CAV platoon vehicles to defend against adversaries corrupting V2V communication reporting preceding vehicle position. RePLACe is unique in that it can provide real-time defense against a spectrum of communication attacks. RePLACe provides systematic augmentation of a platoon controller architecture with real-time detection and mitigation functionality using machine learning. Unlike computationally intensive cryptographic solutions RePLACe accounts for the limited computation capabilities provided by automotive platforms as well as the real-time requirements of the application. Furthermore, unlike control-theoretic approaches, the same framework works against the broad spectrum of attacks. We also develop a systematic approach for evaluation of resiliency of CAV applications against V2V attacks. We perform extensive experimental evaluation to demonstrate the efficacy of RePLACe.more » « less
-
Interest in cooperative perception is growing quickly due to its remarkable performance in improving perception capabilities for connected and automated vehicles. This improvement is crucial, especially for automated driving scenarios in which perception performance is one of the main bottlenecks to the development of safety and efficiency. However, current cooperative perception methods typically assume that all collaborating vehicles have enough communication bandwidth to share all features with an identical spatial size, which is impractical for real-world scenarios. In this paper, we propose Adaptive Cooperative Perception, a new cooperative perception framework that is not limited by the aforementioned assumptions, aiming to enable cooperative perception under more realistic and challenging conditions. To support this, a novel feature encoder is proposed and named Pillar Attention Encoder. A pillar attention mechanism is designed to extract the feature data while considering its significance for the perception task. An adaptive feature filter is proposed to adjust the size of the feature data for sharing by considering the importance value of the feature. Experiments are conducted for cooperative object detection from multiple vehicle-based and infrastructure-based LiDAR sensors under various communication conditions. Results demonstrate that our method can successfully handle dynamic communication conditions and improve the mean Average Precision by 10.18% when compared with the state-of-the-art feature encoder.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1007/s11265-021-01696-6
