Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Synthesis, structures, and reactivity of isomers of [RuCp*(1,4-(Me 2 N) 2 C 6 H 4 )] 2
[RuCp*(1,3,5-R 3 C 6 H 3 )] 2 {Cp* = η 5 -pentamethylcyclopentadienyl, R = Me, Et} have previously been found to be moderately air stable, yet highly reducing, with estimated D + /0.5D 2 (where D 2 and D + represent the dimer and the corresponding monomeric cation, respectively) redox potentials of ca. −2.0 V vs. FeCp 2 +/0 . These properties have led to their use as n-dopants for organic semiconductors. Use of arenes substituted with π-electron donors is anticipated to lead to even more strongly reducing dimers. [RuCp*(1-(Me 2 N)-3,5-Me 2 C 6 H 3 )] + PF 6 − and [RuCp*(1,4-(Me 2 N) 2 C 6 H 4 )] + PF 6 − have been synthesized and electrochemically and crystallographically characterized; both exhibit D + /D potentials slightly more cathodic than [RuCp*(1,3,5-R 3 C 6 H 3 )] + . Reduction of [RuCp*(1,4-(Me 2 N) 2 C 6 H 4 )] + PF 6 − using silica-supported sodium–potassium alloy leads to a mixture of isomers of [RuCp*(1,4-(Me 2 N) 2 C 6 H 4 )] 2 , two of which have been crystallographically characterized. One of these isomers has a similar molecular structure to [RuCp*(1,3,5-Et 3 C 6 H 3 )] 2 ; the central C–C bond is exo , exo , i.e. , on the opposite face of both six-membered rings from the metals. A D + /0.5D 2 potential of −2.4 V is estimated for this exo , exo dimer, more reducing than that of [RuCp*(1,3,5-R 3 C 6 H 3 )] 2 (−2.0 V). This isomer reacts much more rapidly with both air and electron acceptors than [RuCp*(1,3,5-R 3 C 6 H 3 )] 2 due to a much more cathodic D 2 ˙ + /D 2 potential. The other isomer to be crystallographically characterized, along with a third isomer, are both dimerized in an exo , endo fashion, representing the first examples of such dimers. Density functional theory calculations and reactivity studies indicate that the central bonds of these two isomers are weaker than those of the exo , exo isomer, or of [RuCp*(1,3,5-R 3 C 6 H 3 )] 2 , leading to estimated D + /0.5D 2 potentials of −2.5 and −2.6 V vs. FeCp 2 +/0 . At the same time the D 2 ˙ + /D 2 potentials for the exo , endo dimers are anodically shifted relative to those of [RuCp*(1,3,5-R 3 C 6 H 3 )] 2 , resulting in much greater air stability than for the exo , exo isomer.  more » « less
Award ID(s):
2216857
PAR ID:
10333837
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Date Published:
Journal Name:
Dalton Transactions
Volume:
50
Issue:
37
ISSN:
1477-9226
Page Range / eLocation ID:
13020 to 13030
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Dalton Transactions)
    The reduction potentials (reported vs. Fc + /Fc) for a series of Cp′ 3 Ln complexes (Cp′ = C 5 H 4 SiMe 3 , Ln = lanthanide) were determined via electrochemistry in THF with [ n Bu 4 N][BPh 4 ] as the supporting electrolyte. The Ln( iii )/Ln( ii ) reduction potentials for Ln = Eu, Yb, Sm, and Tm (−1.07 to −2.83 V) follow the expected trend for stability of 4f 7 , 4f 14 , 4f 6 , and 4f 13 Ln( ii ) ions, respectively. The reduction potentials for Ln = Pr, Nd, Gd, Tb, Dy, Ho, Er, and Lu, that form 4f n 5d 1 Ln( ii ) ions ( n = 2–14), fall in a narrow range of −2.95 V to −3.14 V. Only cathodic events were observed for La and Ce at −3.36 V and −3.43 V, respectively. The reduction potentials of the Ln( ii ) compounds [K(2.2.2-cryptand)][Cp′ 3 Ln] (Ln = Pr, Sm, Eu) match those of the Cp′ 3 Ln complexes. The reduction potentials of nine (C 5 Me 4 H) 3 Ln complexes were also studied and found to be 0.05–0.24 V more negative than those of the Cp′ 3 Ln compounds. 
    more » « less
  2. ; ; (, Physical Chemistry Chemical Physics)
    Pure methane (CH 4 ) ices processed by energetic electrons under ultra-high vacuum conditions to simulate secondary electrons formed via galactic cosmic rays (GCRs) penetrating interstellar ice mantles have been shown to produce an array of complex hydrocarbons with the general formulae: C n H 2n+2 ( n = 4–8), C n H 2n ( n = 3–9), C n H 2n−2 ( n = 3–9), C n H 2n−4 ( n = 4–9), and C n H 2n−6 ( n = 6–7). By monitoring the in situ chemical evolution of the ice combined with temperature programmed desorption (TPD) studies and tunable single photon ionization coupled to a reflectron time-of-flight mass spectrometer, specific isomers of C 3 H 4 , C 3 H 6 , C 4 H 4 , and C 4 H 6 were probed. These experiments confirmed the synthesis of methylacetylene (CH 3 CCH), propene (CH 3 CHCH 2 ), cyclopropane (c-C 3 H 6 ), vinylacetylene (CH 2 CHCCH), 1-butyne (HCCC 2 H 5 ), 2-butyne (CH 3 CCCH 3 ), 1,2-butadiene (H 2 CCCH(CH 3 )), and 1,3-butadiene (CH 2 CHCHCH 2 ) with yields of 2.17 ± 0.95 × 10 −4 , 3.7 ± 1.5 × 10 −3 , 1.23 ± 0.77 × 10 −4 , 1.28 ± 0.65 × 10 −4 , 4.01 ± 1.98 × 10 −5 , 1.97 ± 0.98 × 10 −4 , 1.90 ± 0.84 × 10 −5 , and 1.41 ± 0.72 × 10 −4 molecules eV −1 , respectively. Mechanistic studies exploring the formation routes of methylacetylene, propene, and vinylacetylene were also conducted, and revealed the additional formation of the 1,2,3-butatriene isomer. Several of the above isomers, methylacetylene, propene, vinylacetylene, and 1,3-butadiene, have repeatedly been shown to be important precursors in the formation of polycyclic aromatic hydrocarbons (PAHs), but until now their interstellar synthesis has remained elusive. 
    more » « less
  3. ; ; ; (, Acta Crystallographica Section C Structural Chemistry)
    By varying the halogen-bond-donor molecule, 11 new halogen-bonding cocrystals involving thiourea or 1,3-dimethylthiourea were obtained, namely, 1,3-dimethylthiourea–1,2-diiodo-3,4,5,6-tetrafluorobenzene (1/1), C 6 F 4 I 2 ·C 3 H 8 N 2 S, 1 , thiourea–1,3-diiodo-2,4,5,6-tetrafluorobenzene (1/1), C 6 F 4 I 2 ·CH 4 N 2 S, 2 , 1,3-dimethylthiourea–1,3-diiodo-2,4,5,6-tetrafluorobenzene (1/1), C 6 F 4 I 2 ·C 3 H 8 N 2 S, 3 , 1,3-dimethylthiourea–1,3-diiodo-2,4,5,6-tetrafluorobenzene–methanol (1/1/1), C 6 F 4 I 2 ·C 3 H 8 N 2 S·CH 4 O, 4 , 1,3-dimethylthiourea–1,3-diiodo-2,4,5,6-tetrafluorobenzene–ethanol (1/1/1), C 6 F 4 I 2 ·C 3 H 8 N 2 S·C 2 H 6 O, 5 , 1,3-dimethylthiourea–1,4-diiodo-2,3,5,6-tetrafluorobenzene (1/1), C 6 F 4 I 2 ·C 3 H 8 N 2 S, 6 , 1,3-dimethylthiourea–1,3,5-trifluoro-2,4,6-triiodobenzene (1/1), C 6 F 3 I 3 ·C 3 H 8 N 2 S, 7 , 1,3-dimethylthiourea–1,1,2,2-tetraiodoethene (1/1), C 6 H 16 N 4 S 2 ·C 2 I 4 , 8 , [(dimethylamino)methylidene](1,2,2-triiodoethenyl)sulfonium iodide–1,1,2,2-tetraiodoethene–acetone (1/1/1), C 5 H 8 I 3 N 2 S + ·I − ·C 3 H 6 O·C 2 I 4 , 9 , 2-amino-4-methyl-1,3-thiazol-3-ium iodide–1,1,2,2-tetraiodoethene (2/3), 2C 4 H 7 N 2 S + ·2I − ·3C 2 I 4 , 10 , and 4,4-dimethyl-4 H -1,3,5-thiadiazine-3,5-diium diiodide–1,1,2,2-tetraiodoethene (2/3), 2C 5 H 12 N 4 S 2+ ·4I − ·3C 2 I 4 , 11 . When utilizing the common halogen-bond-donor molecules 1,2-, 1,3-, and 1,4-diiodotetrafluorobenzene, as well as 1,3,5-trifluoro-2,4,6-triiodobenzene, bifurcated I...S...I interactions were observed, resulting in the formation of isolated rings, chains, and sheets. Tetraiodoethylene (TIE) provided I...S...I cocrystals as well, but further yielded a sulfonium-containing product through the reaction of the S atom with TIE. This particular sulfonium motif is the first of its kind to be structurally characterized, and is stabilized in the solid state through a three-dimensional I...I halogen-bonding network. Thiourea reacted with acetone in the presence of TIE to provide two novel heterocyclic products, again stabilized in the solid state through I...I halogen bonding. 
    more » « less
  4. ; ; (, Acta Crystallographica Section E Crystallographic Communications)
    null (Ed.)
    N , N ′-Di- tert -butylcarbodiimide, Me 3 CN=C=NCMe 3 , undergoes reductive cleavage in the presence of the Gd II complex, [K(18-crown-6) 2 ][Gd II (N R 2 ) 3 ] ( R = SiMe 3 ), to form a new type of ligand, the tert -butylcyanamide anion, (Me 3 CNCN) − . This new ligand can bind metals with one or two donor atoms as demonstrated by the isolation of a single crystal containing potassium salts of both end-on and side-on bound tert -butylcyanamide anions, (Me 3 CNCN) − . The crystal contains [K(18-crown-6)(H 2 O)][NCNCMe 3 - kN ], in which one ( t BuNCN) − anion is coordinated end-on to potassium ligated by 18-crown-6 and water, as well as [K(18-crown-6)][η 2 -NCNCMe 3 ], in which an 18-crown-6 potassium is coordinated side-on to the terminal N—C linkage. This single crystal also contains one equivalent of 1,3-di- tert -butyl urea, (C 9 H 20 N 2 O), which is involved in hydrogen bonding that may stabilize the whole assembly, namely, aqua( tert -butylcyanamidato)(1,4,7,10,13,16-hexaoxacyclooctadecane)potassium(I)–( tert -butylcyanamidato)(1,4,7,10,13,16-hexaoxacyclooctadecane)potassium(I)– N , N ′-di- tert -butylcarbodiimide (1/1/1) [K(C 5 H 9 N 2 )(C 12 H 24 O 6 )]·[K(C 5 H 9 N 2 )(C 12 H 24 O 6 )(H 2 O)]·C 9 H 20 N 2 . 
    more » « less
  5. ; ; ; ; ; ; ; (, ARKIVOC)
    An efficient synthetic route to the mono-endo-6-N,N-diethylcarbamoyl and bis-endo,endo-6,12-N,Ndiethylcarbamoyl derivatives of Tröger’s base (TB), endo-7 and endo-8, is reported. Studies of reaction time, proton source, and additive allowed establishment of optimized conditions for the conversion of exo-7 into the corresponding isomer endo-7. With a longer reaction time, the exo,exo-6,12 bis-carbamoyl derivative exo- 8 was converted into the corresponding endo,endo-bis-carbamoyl product endo-8. Single crystal X-ray crystallographic analysis confirmed the structural and stereochemical assignments made on the basis of 1H NMR, mechanistic, and computational studies. Deuterium quench experiments using LDA, CD3ONa/CD3OD and DCl/CD3OD conditions of both exo-7 and exo-8 afforded exo-7d1 and exo-8d2, respectively (> 95% deuterium incorporation), supporting an enolate mechanism for the isomerization. In contrast, when repeating the experiment with DCl/CD3OD, no deuterium was incorporated, suggesting the traditional ring-opening mechanism involving an iminium ion. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email