An official website of the United States government
Origami has emerged as a promising tool for the design of mechanical structures that can be folded into small volume and expanded to large structures, which enables the desirable features of compact storage and effective deployment. Most attention to date on origami deployment has been on its geometry, kinematics, and quasi-static mechanics, while the dynamics of deployment has not been systematically studied. On the other hand, deployment dynamics could be important in many applications, especially in high speed operation and low damping conditions. This research investigates the dynamic characteristics of the deploying process of origami structures through investigating a Miura-Ori sheet (Fig. 1(b, c)). In this study, we have utilized the stored energy in pre-deformed spring elements to actuate the deployment. We theoretically model and numerically analyze the deploying process of the origami sheet. Specifically, the sheet is modeled by bar-and-hinge blocks, in which the facet and crease stiffnesses are modeled to be related to the bar axial deformation and torsional motion at the creases. On the other hand, the structural inertia is modelled as mass points assigned at hinges. Numerical simulations show that, apart from axial contraction and expansion, the origami structure can exhibit transverse motion during the deploying process. Further investigation reveals that the transverse motion has close relationship with the controlled deploying rate. This research will pave the way for further analysis and applications of the dynamics of origami-based structures.
more »
« less
Deployment Dynamics of Miura Origami Sheets
Abstract Origami has great potential for creating deployable structures, however, most studies have focused on their static or kinematic features, while the complex and yet important dynamic behaviors of the origami deployment process have remained largely unexplored. In this research, we construct a dynamic model of a Miura origami sheet that captures the combined panel inertial and flexibility effects, which are otherwise ignored in rigid folding kinematic models but are critical in describing the dynamics of origami deployment. Results show that by considering these effects, the dynamic deployment behavior would substantially deviate from a nominal kinematic unfolding path. Additionally, the pattern geometries influence the effective structural stiffness, and it is shown that subtle changes can result in qualitatively different dynamic deployment behaviors. These differences are due to the multistability of the Miura origami sheet, where the structure may snap between its stable equilibria during the transient deployment process. Lastly, we show that varying the deployment rate can affect the dynamic deployment configuration. These observations are original and these phenomena have not and cannot be derived using traditional approaches. The tools and outcomes developed from this research enable a deeper understanding of the physics behind origami deployment that will pave the way for better designs of origami-based deployable structures, as well as extend our fundamental knowledge and expand our comfort zone beyond current practice.
more »
« less
- Award ID(s):
- 1943723
- PAR ID:
- 10334001
- Date Published:
- Journal Name:
- Journal of Computational and Nonlinear Dynamics
- Volume:
- 17
- Issue:
- 7
- ISSN:
- 1555-1415
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Origami designs have attracted significant attention from researchers seeking to develop new types of deployable structures due to their ability to undergo large and complex yet predictable shape changes. The Kresling pattern, which is based on a natural accumulation of folds and creases during the twistbuckling of a thin-walled cylinder, offers a great example for the design of deployable systems that expand uniaxially into tubes or booms. However, much remains to be understood regarding the characteristics of Kresling-based deployable systems, and their dynamics during the deployment process remain largely unexplored. Hence this research investigates the deployment of Kresling origami-inspired structures, employing a full sixdegree- of-freedom truss-based model to study their dynamics under different conditions. Results show that tuning the initial rotation angle of a structure gives rise to several qualitatively distinct mechanical properties and stability characteristics, each of which has different implications for the design of the deployable systems. Dynamic analyses reveal the robustness of Kresling structures to out-of-axis perturbations while remaining compliant in the axial direction. These findings suggest that Kresling-based designs can form the basis for the development of new types of deployable structures and systems with tunable performance.more » « less
-
We investigate the controllability of an origami system composed of Miura-ori cells. A substantial volume of research on folding architecture, kinematic behavior, and actuation techniques of origami structures has been conducted. However, understanding their transient dynamics and constructing control models remains a formidable task, primarily due to their innate flexibility and compliance. In light of this challenge, we discretize the origami system into a network composed of interconnected particle masses alongside bar and hinge elements. This yields a state-space representation of the system's dynamics, enabling us to obtain the system's controllability attributes. Informed by this computational framework, we explore the controllability Gramian-based method for finding the most efficient crease line for Miura-ori cell deployment using an actuator. We demonstrate that the deployment efficiency guided by this theoretical method agrees with the empirical results obtained from the energy consumption to deploy the origami structure. This investigation paves the way toward designing and operating an efficient the complex actuation system for origami tessellations.more » « less
-
null (Ed.)Abstract Curved surfaces are often used to radiate and focus acoustic waves. Yet, when tessellated into reconfigurable surfaces for sake of deployability needs, origami-inspired acoustic arrays may be challenging to hold into curved shape and may not retain flat foldability. On the other hand, deployable mechanisms such as the Hoberman ring are as low-dimensional as many origami tessellations and may maintain curved shape with ease due to ideal rigid bar compositions. This research explores an interface between a Hoberman ring and Miura-ori tessellation that maintain kinematic and geometric compatibility for sake of maintaining curved shapes for sound focusing. The Miura-ori facets are considered to vibrate like baffled pistons and generate acoustic waves that radiate from the ring structure. An analytical model is built to reveal the near field acoustic behavior of acoustic arrays resulting from a Hoberman–Miura system synthesis. Acoustic wave focusing capability is scrutinized and validated through proof-of-principle experiments. Studies reveal wave focusing phenomena distinct to this manifestation of the acoustic array and uncover design and operational influences on wave focusing effectiveness. The results encourage exploration of new interfaces between reconfigurable mechanisms and origami devices where low-dimensional shape change is desired.more » « less
-
Origami — the ancient art of paper folding — has been widely adopted as a design and fabrication framework for many engineering applications, including multi-functional structures, deployable spacecraft, and architected materials. These applications typically involve complex and dynamic deformations in the origami facets, necessitating high-fidelity models to better simulate folding-induced mechanics and dynamics. This paper presents the formulation and validation of such a new model based on the Absolute Nodal Coordinate Formulation (ANCF), which exploits the tessellated nature of origami and describes it as an assembly of flexible panels rotating around springy creases. To estimate the crease folding, we mathematically formulate a “torsional spring connector” in the framework of ANCF and apply it to the crease nodes, where the facets meshed by ANCF plate elements are interconnected. We simulate the dynamic folding of a Miura-ori unit cell and compare the results with commercial finite element software (ABAQUS) to validate the modeling accuracy. The ANCF model can converge using significantly fewer elements than ABAQUS without sacrificing accuracy. Therefore, this high-fidelity model can help deepen our knowledge of folding-induced mechanics and dynamics, broadening the appeals of origami in science and engineering.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1115/1.4054109
