The environmentally sustainable production of biodiesel is important for providing both a renewable alternative transportation fuel as well as a fuel for power generation using diesel engines. This research evaluates the use of inexpensive catalysts derived from waste materials for converting triglycerides in seed oils into biodiesel composed of fatty acid methyl esters. The performance of CaO catalysts derived from the shells of oysters, mussels, lobsters, and chicken eggs was investigated. The shell-derived powders were calcined with and without the addition of zinc nitrate at 700–1000 °C for 4 h to yield CaO whereas the CaO-ZnO mixed catalyst were prepared by wet impregnation followed by calcination at 700 °C. The catalysts were characterized by XRF, XRD, TGA, SEM, FTIR and GC-MS. The CaO-ZnO catalysts showed slightly better conversion efficiency compared to CaO catalysts for the transesterification of canola oil. The mixed CaO-ZnO catalysts derived mainly from oyster shells showed the highest catalytic activity with >90% biodiesel yield at a 9:1 methanol-to-oil mole ratio within 10 min of ultrasonication. The reduction of toxicant emission from the generator is 43% and 60% for SO2, 11% and 26% for CO, were observed for the biodiesel blending levels of B20 and B40, respectively.
- Award ID(s):
- 1633608
- PAR ID:
- 10341163
- Date Published:
- Journal Name:
- Transactions of the ASABE
- Volume:
- 62
- Issue:
- 2
- ISSN:
- 2151-0040
- Page Range / eLocation ID:
- 467 to 474
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Tae Hyun Kim (Ed.)more » « less
-
Effect of Acidic Hydrochar on Plastic Crude Oil Produced from Hydrothermal Liquefaction of Waste PVCIn this study, the effect of hydrothermal liquefaction (HTL) of waste PVC was investigated in the presence of acidic hydrochar. The hydrochar was prepared by hydrothermal carbonization of pineapple waste at 250 °C and at 1 h in the presence of citric acid. Hydrochar was acidic, stable, and porous and contained acidic functional groups. Hydrochar was co-fed with PVC during HTL to enhance HTL conversion and quality of the plastic crude oil. HTL experiments were performed at 300–350 °C, 0.25–4 h of reaction times, and 0–20 wt% hydrochar-to-PVC ratio. The plastic crude oil was separated from the solid residue to evaluate HTL conversion and to analyze elemental compositions, boiling point distribution, alteration of chemical bonds, and chemical compositions. The results showed that acidic hydrochar enhances HTL conversion with a maximum value of 28.75 at 5 wt% hydrochar content at 350 °C and 0.5 h. Furthermore, plastic crude oils contained no chloride but contained significantly high carbon and hydrogen, resulting in a higher heating value of up to 36.43 MJ/kg. The major component of the plastic crude oil was 3, 5 dimethylphenol produced ranging from 61.4 to 86.4% (percentage of total identified area) according to gas chromatography mass spectroscopy (GCMS) data.more » « less
-
null (Ed.)Empty fruit bunches (EFB) are waste products in the palm oil industry. Upon pressing of EFB, a liquor is produced which contains low grade fats, oils, and greases (FOG). These are the least valuable products of palm oil production, and are often discarded as waste. It is shown here that the EFB pressed liquor can be thermally transformed at or below 350 °C to produce a series of hydrocarbons in the range of kerosene and diesel fuel. This is distinctly different from other studies of biofuels from palm oil, which were based entirely on biodiesel (fatty acid methyl ester (FAME)) and biogas production. Furthermore, this transformation takes place without addition of an external catalyst, as was shown by comparison to reactions with the potential Lewis acid catalysts, ferric sulfate, and molecular sieves. The product distribution is similar to that obtained from brown grease, another waste FOG stream obtained from the sewage treatment industry, although the products from palm oil waste are less sensitive to reaction conditions.more » « less
-
unknown (Ed.)more » « less
Abstract Washing crude epoxidized oil is an indispensable step for the removal of residual acetic acid and unreacted hydrogen peroxide after epoxidation. There are many studies on the epoxidation of vegetable oils but there are many discrepancies in the washing process which likely leads to water wastage, excess use of neutralizing agent, and additional processing time. Hence, this study aims to optimize the washing step by analyzing the quality of each washing step and developing a model that can predict the amount of acid removed. Soybean oil (1.5 kg) was epoxidized at 60°C for 5.5 h using Amberlite IR 120H as a heterogeneous catalyst. To determine the optimum water washing level, process parameters such as number of washing cycles (1–5), proportion of epoxidized oil to water volume (1:0.5, 1:1, 1:2, 1:3, 1:4, 1:5), and water temperature (20, 40, and 60°C) were examined. The main responses were the residual acid value and pH of the washed epoxidized oil. Results revealed that 64% of the acid was removed after 5 washing cycles irrespective of the washing water temperature and proportion. In contrast, approximately 57% of the acid was removed in the first two washing cycles. Increasing the temperature of the water affected acid removal; with approximately 54% of acid removed at 20°C compared to 60% at 60°C. Doubling or tripling the amount of water needed above a 1:0.5 ratio did not significantly affect the amount of acid removed. The model developed was significant with a predicted
R 2of 96% and a root mean square error (RMSE) of 1.1 when the model was validated at different washing scenarios. Therefore, this study shows that it is possible to significantly reduce the amount of water used and processing time while maintaining resin qualities. -
more » « less
Abstract BACKGROUND Although switchgrass has been developed as a biofuel feedstock and its potential for bioethanol and bio‐oil from fast pyrolysis reported in the literature, the use of the seeds of switchgrass as a source of triglycerides for biodiesel production has not been reported. Similarly, the potential for extracting triglycerides from coffeeweed (an invasive plant of no current economic value) needs to be investigated to ascertain its potential economic use for biodiesel production.
RESULTS The results show that coffeeweed and switchgrass seeds contain known triglycerides which are 983 and 1000 g kg−1respectively of the fatty acids found in edible vegetable oils such as sunflower, corn and soybean oils. In addition, the triglyceride yields of 53–67 g kg−1of the seed samples are in the range of commercial oil‐producing seeds such as corn (42 g kg−1).
CONCLUSION The results also indicate that the two non‐edible oils could be used as substitutes for edible oil for biodiesel production. In addition, the use of seeds of switchgrass for non‐edible oil production (as a feedstock for the production of biodiesel) further increases the total biofuel yield when switchgrass is cultivated for use as energy feedstock for pyrolysis oil and biodiesel production. © 2016 Society of Chemical Industry
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.13031/trans.13003
