skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Model calibration of locally nonlinear dynamical systems: Extended constitutive relation error with multi-harmonic coefficients
Title: Model calibration of locally nonlinear dynamical systems: Extended constitutive relation error with multi-harmonic coefficients
Purpose This paper aims to present an approach for calibrating the numerical models of dynamical systems that have spatially localized nonlinear components. The approach implements the extended constitutive relation error (ECRE) method using multi-harmonic coefficients and is conceived to separate the errors in the representation of the global, linear and local, nonlinear components of the dynamical system through a two-step process. Design/methodology/approach The first step focuses on the system’s predominantly linear dynamic response under a low magnitude periodic excitation. In this step, the discrepancy between measured and predicted multi-harmonic coefficients is calculated in terms of residual energy. This residual energy is in turn used to spatially locate errors in the model, through which one can identify the erroneous model inputs which govern the linear behavior that need to be calibrated. The second step involves measuring the system’s nonlinear dynamic response under a high magnitude periodic excitation. In this step, the response measurements under both low and high magnitude excitation are used to iteratively calibrate the identified linear and nonlinear input parameters. Findings When model error is present in both linear and nonlinear components, the proposed iterative combined multi-harmonic balance method (MHB)-ECRE calibration approach has shown superiority to the conventional MHB-ECRE method, while providing more reliable calibration results of the nonlinear parameter with less dependency on a priori knowledge of the associated linear system. Originality/value This two-step process is advantageous as it reduces the confounding effects of the uncertain model parameters associated with the linear and locally nonlinear components of the system.  more » « less
Award ID(s):
1633608
PAR ID:
10341182
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Engineering Computations
Volume:
36
Issue:
2
ISSN:
0264-4401
Page Range / eLocation ID:
466 to 490
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, International Journal of Non-Linear Mechanics)
    This paper examines the effect of viscoelasticity on the periodic response of a lumped parameter viscoelastic von Mises truss. The viscoelastic system is described by a second-order equation that governs the mechanical motion coupled to a first-order equation that governs the time evolution of the viscoelastic forces. The viscoelastic force evolves at a much slower rate than the elastic oscillations in the system. This adds additional time scales and degrees of freedom to the system compared to its viscous counterparts. The focus of this study is on the system’s behavior under harmonic loading, which is expected to show both regular and chaotic dynamics for certain combinations of forcing frequency and amplitude. While the presence of chaos in this system has already been demonstrated, we shall concentrate only on the periodic solutions. The presence of the intrawell and interwell periodic oscillations is revealed using the Harmonic Balance method. The study also looks at the influence of parameter changes on the system’s behavior through bifurcation diagrams, which enable us to identify optimal system parameters for maximum energy dissipation. Lastly, we formulate an equivalent viscous system using an energy-based approach. We observe that a naive viscous model fails to capture the behavior accurately depending on the system and excitation parameters, as well as the type of excitation. This underscores the necessity to study the full-scale viscoelastic system. 
    more » « less
  2. ; ; ; ; ; ; (, Vibration)
    null (Ed.)
    In the present article, we follow up our recent work on the experimental assessment of two data-driven nonlinear system identification methodologies. The first methodology constructs a single nonlinear-mode model from periodic vibration data obtained under phase-controlled harmonic excitation. The second methodology constructs a state-space model with polynomial nonlinear terms from vibration data obtained under uncontrolled broadband random excitation. The conclusions drawn from our previous work (experimental) were limited by uncertainties inherent to the specimen, instrumentation, and signal processing. To avoid these uncertainties in the present work, we pursued a completely numerical approach based on synthetic measurement data obtained from simulated experiments. Three benchmarks are considered, which feature geometric, unilateral contact, and dry friction nonlinearity, respectively. As in our previous work, we assessed the prediction accuracy of the identified models with a focus on the regime near a particular resonance. This way, we confirmed our findings on the strengths and weaknesses of the two methodologies and derive several new findings: First, the state-space method struggles even for polynomial nonlinearities if the training data is chaotic. Second, the polynomial state-space models can reach high accuracy only in a rather limited range of vibration levels for systems with non-polynomial nonlinearities. Such cases demonstrate the sensitivity to training data inherent in the method, as model errors are inevitable here. Third, although the excitation does not perfectly isolate the nonlinear mode (exciter-structure interaction, uncontrolled higher harmonics, local instead of distributed excitation), the modal properties are identified with high accuracy. 
    more » « less
  3. ; (, Proceedings of the American Control Conference)
    null (Ed.)
    This paper considers system identification for systems whose output is asymptotically periodic under constant inputs. The model used for system identification is a discretetime Lur’e model consisting of asymptotically stable linear dynamics, a time delay, a washout filter, and a static nonlinear feedback mapping. For sufficiently large scaling of the loop transfer function, these components cause divergence under small signal levels and decay under large signal amplitudes, thus producing an asymptotically oscillatory output. A leastsquares technique is used to estimate the coefficients of the linear model as well as the parameters of a piecewise-linear approximation of the feedback mapping. 
    more » « less
  4. ; ; (, Journal of Vibration and Acoustics)
    Abstract Quasi-periodic motions can be numerically found in piecewise-linear systems, however, their characteristics have not been well understood. To illustrate this, an incremental harmonic balance (IHB) method with two timescales is extended in this work to analyze quasi-periodic motions of a non-smooth dynamic system, i.e., a gear transmission system with piecewise linearity stiffness. The gear transmission system is simplified to a four degree-of-freedom nonlinear dynamic model by using a lumped mass method. Nonlinear governing equations of the gear transmission system are formulated by utilizing the Newton’s second law. The IHB method with two timescales applicable to piecewise-linear systems is employed to examine quasi-periodic motions of the gear transmission system whose Fourier spectra display uniformly spaced sideband frequencies around carrier frequencies. The Floquet theory is extended to analyze quasi-periodic solutions of piecewise-linear systems based on introduction of a small perturbation on a steady-state quasi-periodic solution of the gear transmission system with piecewise linearities. Comparison with numerical results calculated using the fourth-order Runge-Kutta method confirms that excellent accuracy of the IHB method with two timescales can be achieved with an appropriate number of harmonic terms. 
    more » « less
  5. ; (, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences)
    Vibration energy harvesting is increasingly being seen as a viable energy source to provide for our energy-dependent society. There has been great interest in scavenging previously unused or wasted energy in a large variety of systems including vibrating machinery, ocean waves and human motion. In this work, a bench-top system of a piecewise-linear nonlinear vibration energy harvester is studied. A similar idealized model of the system had previously been studied numerically, and in this work the method is adjusted to better account for the physical system. This new design is able to actively tune the system’s resonant frequency to match the current excitation through the adjustment of the gap size between the oscillator and mechanical stopper; thus maximizing the system response over a broad frequency range. This design shows an increased effective frequency bandwidth compared with traditional linear systems and improves upon current nonlinear designs that are less effective than linear harvesters at resonance. In this paper, the physical system is tested at various excitation conditions and gap sizes to showcase the new harvester design’s effectiveness. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email