An official website of the United States government
Over the past two decades, chemical looping combustion (CLC) has been extensively investigated as a promising means to produce electric power while generating a concentrated carbon dioxide stream for sequestration. We note that the chemical looping strategy can be extended well outside of combustion-based carbon capture. In fact, application of the chemical looping strategy in areas beyond combustion can result in somewhat unexpected energy and carbon dioxide savings without producing a concentrated CO2 stream at all. Furthermore, it allows the looping-based technologies to tap into applications such as chemical production – a $4 trillion per year industrial sector with high energy and carbon intensities. The key resides in the design of effective oxygen carriers, also known as redox catalysts in the context of selective chemical conversion through chemical looping catalysis (CLCa). This contribution focuses on the design and applications of mixed oxides as multi-function reaction media in CLCa. Since typical mixed oxide oxygen carriers tend to be nonselective for hydrocarbon conversion, the first part of this article presents generalized design principles for surface modification of mixed oxides to improve their selectivity and catalytic activity. Applications of these redox catalysts in chemical looping – oxidative dehydrogenation (CL-ODH) of a variety of light alkanes and alkyl-benzenes are presented. This is followed with a discussion of computation assisted mixed oxide design based upon thermodynamic criteria. Finally, a few new directions for the chemical looping technologies are introduced.
more »
« less
A Combined Chemical-Electrochemical Process to Capture CO2 and Produce Hydrogen and Electricity
Several carbon sequestration technologies have been proposed to utilize carbon dioxide (CO2) to produce energy and chemical compounds. However, feasible technologies have not been adopted due to the low efficiency conversion rate and high-energy requirements. Process intensification increases the process productivity and efficiency by combining chemical reactions and separation operations. In this work, we present a model of a chemical-electrochemical cyclical process that can capture carbon dioxide as a bicarbonate salt. The proposed process also produces hydrogen and electrical energy. Carbon capture is enhanced by the reaction at the cathode that displaces the equilibrium into bicarbonate production. Literature data show that the cyclic process can produce stable operation for long times by preserving ionic balance using a suitable ionic membrane that regulates ionic flows between the two half-cells. Numerical simulations have validated the proof of concept. The proposed process could serve as a novel CO2 sequestration technology while producing electrical energy and hydrogen.
more »
« less
- Award ID(s):
- 2018945
- PAR ID:
- 10346432
- Date Published:
- Journal Name:
- Energies
- Volume:
- 14
- Issue:
- 18
- ISSN:
- 1996-1073
- Page Range / eLocation ID:
- 5807
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Novel energy efficient and scalable carbon capture and sequestration technologies are critical to meeting the goals of the Paris Agreement. In this study, we present a first-order system-level assessment of an integrated carbon capture and carbon sequestration plant that couples electrochemical CO2 capture from oceanwater with co-located long-term carbon sequestration as CO2 hydrates (ice-like solids) on the seabed. Separate recent experimental results associated with electrochemical capture and hydrate formation form the basis for this energetics-focused analysis, which evaluates power consumption of all the key components associated with capture and sequestration. Hydrates can be formed from both pure water as well as seawater, and the implications of including a desalination plant to provide pure water for hydrate formation are studied. All analysis is conducted for a 1 plant which captures and sequesters 1 megaton CO2 annually. Our results indicate the carbon capture will consume significantly more energy than carbon sequestration despite the use of a low-energy consuming electrochemical technique. From a sequestration standpoint, there are clear benefits to forming hydrates at high pressures, since the elevated formation rates reduce the number of hydrate formation reactors significantly. It is also seen that the addition of a desalination plant to provide pure water for hydrate formation (which speeds up hydrate formation) will not affect the energetics of the overall process significantly; however the CAPEX and operational aspects of including a desalination plant need to be analyzed in greater detail. Overall, this study seeds a novel CCS concept which can be deployed via decommissioned oil-gas platforms to capture CO2 from surface oceanwater and store CO2 right below on the seabed after appropriate sealing (artificial or natural).more » « less
-
Anthropogenic carbon dioxide (CO2) release in the atmosphere from fossil fuel combustion has inspired scientists to study CO2 to fuel conversion. Oxygenic phototrophs such as cyanobacteria have been used to produce biofuels using CO2. However, oxygen generation during oxygenic photosynthesis affects biofuel production efficiency. To produce n-butanol (biofuel) from CO2, here we introduced an n-butanol biosynthesis pathway into an anoxygenic (non-oxygen evolving) photoautotroph, Rhodopseudomonas palustris TIE-1 (TIE-1). Using different carbon, nitrogen, and electron sources, we achieved n-butanol production in wild-type TIE-1 and mutants lacking electron-consuming (nitrogen-fixing) or acetyl-CoA-consuming (polyhydroxybutyrate and glycogen synthesis) pathways. The mutant lacking the nitrogen-fixing pathway produced highest n-butanol. Coupled with novel hybrid bioelectrochemical platforms, this mutant produced nbutanol using CO2, solar panel-generated electricity, and light, with high electrical energy conversion efficiency. Overall, this approach showcases TIE-1 as an attractive microbial chassis for carbon-neutral n-butanol bioproduction using sustainable, renewable, and abundant resources.more » « less
-
Electrochemical conversion of carbon dioxide (CO2) to valuable products could provide a transformative pathway to produce renewable fuels while adding value to the CO2 captured at point sources. Here, we investigate the thermodynamic feasibility and economic viability of the electrochemical CO2 reduction reaction to various carbon-containing fuels. In particular, we explore various pathways for conversion of CO2 to dimethyl ether (DME), liquid propane gas, and renewable natural gas. We compare and contrast the use of two different proton sources, including hydrogen gas and water vapor at the anode, on the capital and operating costs (OPEX) of electrochemical systems to produce DME. The results indicate that the electrical costs are the most significant portion of OPEX, demonstrating costs of 0.2–0.6 $/kWh per metric ton of DME. DME production using carbon monoxide and formic acid as intermediates proved to be the most cost-effective, demonstrating levelized costs of energy of 0.28 $/kWh with over 0.15 $/kWh of cost recovery possible through renewable hydrogen tax credits and oxygen and hydrogen gas recovery.more » « less
-
Carbon dioxide is inexpensive and abundant, and its prevalence as waste makes it attractive as a sustainable chemical feedstock. Although there are examples of copolymerizations of CO2 with high-energy monomers, the direct copolymerization of CO2 with olefins has not been reported. Herein, an alternate route to functionalizable, recyclable polyesters derived from CO2, butadiene and hydrogen via an intermediary lactone, 3-ethyl-6-vinyltetrahydro-2H-pyran-2-one, is described. Catalytic ring-opening polymerization of the lactone by 1,5,7-triazabicyclo[4.4.0]dec-5-ene yields polyesters with molar masses up to 13.6 kg/mol and pendent vinyl sidechains that can undergo post-polymerization functionalization. The polymer has a low ceiling temperature of 138 ºC, allowing for facile chemical recycling, and is inherently biodegradable under aerobic aqueous conditions (OECD-301B protocol). These results mark the first example of a well-defined polyester derived from CO2, olefins and hydrogen, expanding access to new polymer feedstocks that were once considered unfeasible.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/en14185807
