An official website of the United States government
Angle-sensitive photodetectors are a promising device technology for many advanced imaging functionalities, including lensless compound-eye vision, lightfield sensing, optical spatial filtering, and phase imaging. Here we demonstrate the use of plasmonic gradient metasurfaces to tailor the angular response of generic planar photodetectors. The resulting devices rely on the phase-matched coupling of light incident at select geometrically tunable angles into guided plasmonic modes, which are then scattered and absorbed in the underlying photodetector active layer. This approach naturally introduces sharp peaks in the angular response, with smaller footprint and reduced guided-mode radiative losses (and therefore improved spatial resolution and sensitivity) compared to analogous devices based on diffractive coupling. More broadly, these results highlight a promising new application space of flat optics, where gradient metasurfaces are integrated within image sensors to enable unconventional capabilities with enhanced system miniaturization and design flexibility.
more »
« less
Optical spatial filtering with plasmonic directional image sensors
Photonics provides a promising approach for image processing by spatial filtering, with the advantage of faster speeds and lower power consumption compared to electronic digital solutions. However, traditional optical spatial filters suffer from bulky form factors that limit their portability. Here we present a new approach based on pixel arrays of plasmonic directional image sensors, designed to selectively detect light incident along a small, geometrically tunable set of directions. The resulting imaging systems can function as optical spatial filters without any external filtering elements, leading to extreme size miniaturization. Furthermore, they offer the distinct capability to perform multiple filtering operations at the same time, through the use of sensor arrays partitioned into blocks of adjacent pixels with different angular responses. To establish the image processing capabilities of these devices, we present a rigorous theoretical model of their filter transfer function under both coherent and incoherent illumination. Next, we use the measured angle-resolved responsivity of prototype devices to demonstrate two examples of relevant functionalities: (1) the visualization of otherwise invisible phase objects and (2) spatial differentiation with incoherent light. These results are significant for a multitude of imaging applications ranging from microscopy in biomedicine to object recognition for computer vision.
more »
« less
- Award ID(s):
- 1711156
- PAR ID:
- 10346458
- Date Published:
- Journal Name:
- Optics Express
- Volume:
- 30
- Issue:
- 16
- ISSN:
- 1094-4087
- Page Range / eLocation ID:
- 29074
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Active imaging and structured illumination originated in “bulk” optical systems: free-space beams controlled with lenses, spatial light modulators, gratings, and mirrors to structure the optical diffraction and direct the beams onto the target. Recently, optical phased arrays have been developed with the goal of replacing traditional bulk active imaging systems with integrated optical systems. In this paper, we demonstrate the first array of optical phased arrays forming a composite aperture. This composite aperture is used to implement a Fourier-based structured-illumination imaging system, where moving fringe patterns are projected on a target and a single integrating detector is used to reconstruct the spatial structure of the target from the time variation of the back-scattered light. We experimentally demonstrate proof-of-concept Fourier-basis imaging in 1D using a six-element array of optical phased arrays, which interfere pairwise to sample up to 11 different spatial Fourier components, and reconstruct a 1D delta-function target. This concept addresses a key complexity constraint in scaling up integrated photonic apertures by requiring only elements in a sparse array to produce an image with resolvable spots.more » « less
-
null (Ed.)Most modern commodity imaging systems we use directly for photography—or indirectly rely on for downstream applications—employ optical systems of multiple lenses that must balance deviations from perfect optics, manufacturing constraints, tolerances, cost, and footprint. Although optical designs often have complex interactions with downstream image processing or analysis tasks, today’s compound optics are designed in isolation from these interactions. Existing optical design tools aim to minimize optical aberrations, such as deviations from Gauss’ linear model of optics, instead of application-specific losses, precluding joint optimization with hardware image signal processing (ISP) and highly parameterized neural network processing. In this article, we propose an optimization method for compound optics that lifts these limitations. We optimize entire lens systems jointly with hardware and software image processing pipelines, downstream neural network processing, and application-specific end-to-end losses. To this end, we propose a learned, differentiable forward model for compound optics and an alternating proximal optimization method that handles function compositions with highly varying parameter dimensions for optics, hardware ISP, and neural nets. Our method integrates seamlessly atop existing optical design tools, such as Zemax . We can thus assess our method across many camera system designs and end-to-end applications. We validate our approach in an automotive camera optics setting—together with hardware ISP post processing and detection—outperforming classical optics designs for automotive object detection and traffic light state detection. For human viewing tasks, we optimize optics and processing pipelines for dynamic outdoor scenarios and dynamic low-light imaging. We outperform existing compartmentalized design or fine-tuning methods qualitatively and quantitatively, across all domain-specific applications tested.more » « less
-
null (Ed.)Plasmonic chiral metamaterials have attracted broad research interest because of their potential applications in optical communication, biomedical diagnosis, polarization imaging, and circular dichroism spectroscopy. However, optical losses in plasmonic structures severely limit practical applications. Here, we present the design concept and experimental demonstration for highly efficient subwavelength-thick plasmonic chiral metamaterials with strong chirality. The proposed designs utilize plasmonic metasurfaces to control the phase and polarization of light and exploit anisotropic thin-film interference effects to enhance optical chirality while minimizing optical loss. Based on such design concepts, we demonstrated experimentally optical devices such as circular polarization filters with transmission efficiency up to 90% and extinction ratio >180, polarization converters with conversion efficiency up to 90%, as well as on-chip integrated microfilter arrays for full Stokes polarization detection with high accuracy over a broad wavelength range (3.5–5 μm). The proposed design concepts are applicable from near-infrared to Terahertz regions via structural engineering.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1364/OE.460556
