The formation and reactivities of [Cu–O–M] 2+ species (M = Ti–Cu, Zr–Mo and Ru–Ag) in metal-exchanged zeolites, as well as stabilities of these species towards autoreduction by O 2 elimination are investigated with density functional theory. These species were investigated in zeolite mordenite in search of insights into active site formation mechanisms, the relationship between stability and reactivity as well as discovery of heterometallic species useful for isothermal methane-to-methanol conversion (MMC). Several [Cu–O–M] 2+ species (M = Ti–Cr and Zr–Mo) are substantially more stable than [Cu 2 O] 2+ . Other [Cu–O–M] 2+ species, (M = Mn–Ni and Ru–Ag) have similar formation energies to [Cu 2 O] 2+ , to within ±10 kcal mol −1 . Interestingly, only [Cu–O–Ag] 2+ is more active for methane activation than [Cu 2 O] 2+ . [Cu–O–Ag] 2+ is however more susceptible to O 2 elimination. By considering the formation energies, autoreduction, cost and activity towards the methane C–H bond, we can only conclude that [Cu 2 O] 2+ is best suited for MMC. Formation of [Cu 2 O] 2+ is initiated by proton transfer from aquo ligands to the framework and proceeds mostly via dehydration steps. Its μ-oxo bridge is formed via water-assisted condensation of two hydroxo groups. To evaluate the relationship between [Cu 2 O] 2+ and other active sites, we also examined the formation energies of other species. The formation energies follow the trend: isolated [Cu–OH] + < paired [Cu–OH] + < [Cu 2 O] 2+ < [Cu 3 O 3 ] 2+ . Inclusion of Gibbs free-energy corrections indicates activation temperatures of 257, 307 and 327 and 331 °C for isolated [Cu–OH] + , paired [Cu–OH] + , [Cu 2 O] 2+ and [Cu 3 O 3 ] 2+ , respectively. The provocative nature of the lower-than-expected activation temperature for isolated [Cu–OH] + species is discussed.
more »
« less
Propane dehydrogenation over extra-framework In( i ) in chabazite zeolites
Indium on silica, alumina and zeolite chabazite (CHA), with a range of In/Al ratios and Si/Al ratios, have been investigated to understand the effect of the support on indium speciation and its corresponding influence on propane dehydrogenation (PDH). It is found that In 2 O 3 is formed on the external surface of the zeolite crystal after the addition of In(NO 3 ) 3 to H-CHA by incipient wetness impregnation and calcination. Upon reduction in H 2 gas (550 °C), indium displaces the proton in Brønsted acid sites (BASs), forming extra-framework In + species (In-CHA). A stoichiometric ratio of 1.5 of formed H 2 O to consumed H 2 during H 2 pulsed reduction experiments confirms the indium oxidation state of +1. The reduced indium is different from the indium species observed on samples of 10In/SiO 2 , 10In/Al 2 O 3 ( i.e. , 10 wt% indium) and bulk In 2 O 3 , in which In 2 O 3 was reduced to In(0), as determined from the X-ray diffraction patterns of the product, H 2 temperature-programmed reduction (H 2 -TPR) profiles, pulse reactor investigations and in situ transmission FTIR spectroscopy. The BASs in H-CHA facilitate the formation and stabilization of In + cations in extra-framework positions, and prevent the deep reduction of In 2 O 3 to In(0). In + cations in the CHA zeolite can be oxidized with O 2 to form indium oxide species and can be reduced again with H 2 quantitatively. At comparable conversion, In-CHA shows better stability and C 3 H 6 selectivity (∼85%) than In 2 O 3 , 10In/SiO 2 and 10In/Al 2 O 3 , consistent with a low C 3 H 8 dehydrogenation activation energy (94.3 kJ mol −1 ) and high C 3 H 8 cracking activation energy (206 kJ mol −1 ) in the In-CHA catalyst. A high Si/Al ratio in CHA seems beneficial for PDH by decreasing the fraction of CHA cages containing multiple In + cations. Other small-pore zeolite-stabilized metal cation sites could form highly stable and selective catalysts for this and facilitate other alkane dehydrogenation reactions.
more »
« less
- Award ID(s):
- 1803246
- NSF-PAR ID:
- 10355660
- Date Published:
- Journal Name:
- Chemical Science
- Volume:
- 13
- Issue:
- 10
- ISSN:
- 2041-6520
- Page Range / eLocation ID:
- 2954 to 2964
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Abstract This work systematically investigates the thermodynamic stability of SiaOb(M)cCdstructures derived from polymeric precursors incorporating metal fillers: Ta, Nb, and Hf, at 1200 and 1500°C. Structural characterization of the polymer derived ceramics (PDCs) employs X‐ray diffraction, Fourier transform infrared spectroscopy, and X‐ray photoelectron spectroscopy. Enthalpies of formation relative to crystalline components (metal oxide, silica, silicon carbide, and graphite) are obtained from thermodynamic measurements by high temperature oxide melt solution calorimetry. The enthalpies of formation (∆H°f, comp) of Ta‐1200, Hf‐1200, Nb‐1200, Ta‐1500, Hf‐1500, and Nb‐1500 specimens are −137.82 ± 9.72, −256.31 ± 8.97, −82.80 ± 9.82, −182.80 ± 7.85, −292.54 ± 9.38, −224.98 ± 9.60 kJ/mol, respectively. Overall incorporation of Hf results in most thermodynamically stable structures at all synthesis temperatures. SiaOb(M)cCdspecimens employing Nb fillers undergo the most stable structural evolution in this temperature range. The results indicate strong thermodynamic drive for carbothermal reduction of metal oxide domains. Incorporation of Ta provides the greatest stabilization of SiO3C mixed bonding environments. Ultimately, the choice of metal filler influences composition, structural evolution, and thermodynamic stability in PDCs.
-
more » « less
Abstract Borates and borosilicates are potential candidates for the design and development of glass formulations with important industrial and technological applications. A major challenge that retards the pace of development of borate/borosilicate based glasses using predictive modeling is the lack of reliable computational models to predict the structure‐property relationships in these glasses over a wide compositional space. A major hindrance in this pursuit has been the complexity of boron‐oxygen bonding due to which it has been difficult to develop adequate B–O interatomic potentials. In this article, we have evaluated the performance of three B–O interatomic potential models recently developed by Bauchy et al [
J .Non‐Cryst. Solids , 2018, 498, 294–304], Du et al [J. Am. Ceram. Soc. https://doi.org/10.1111/jace.16082 ] and Edèn et al [Phys. Chem. Chem. Phys. , 2018, 20, 8192–8209] aiming to reproduce the short‐to‐medium range structures of sodium borosilicate glasses in the system 25 Na2Ox B2O3(75 −x ) SiO2(x = 0‐75 mol%). To evaluate the different force fields, we have computed at the density functional theory level the NMR parameters of11B,23Na, and29Si of the models generated with the three potentials and the simulated MAS NMR spectra compared with the experimental counterparts. It was observed that the rigid ionic models proposed by Bauchy and Du can both reliably reproduce the partitioning between BO3and BO4species of the investigated glasses, along with the local environment around sodium in the glass structure. However, they do not accurately reproduce the second coordination sphere of silicon ions and the Si–O–T (T = Si, B) and B‐O‐T distribution angles in the investigated compositional space which strongly affect the NMR parameters and final spectral shape. On the other hand, the core‐shell parameterization model proposed by Edén underestimates the fraction of BO4species of the glass with composition 25Na2O 18.4B2O356.6SiO2but can accurately reproduce the shape of the11B and29Si MAS‐NMR spectra of the glasses investigations due to the narrower B–O–T and Si‐O‐T bond angle distributions. Finally, the effect of the number of boron atoms (also distinguishing the BO3and BO4units) in the second coordination sphere of the network former cations on the NMR parameters have been evaluated. -
Water is ubiquitous in many thermal treatments and reaction conditions involving zeolite catalysts, but the potential impacts are complex. The different types of water interaction with zeolites have profound consequences in the stability, structure/ composition, and reactivity of these important catalysts. This review analyzes the current knowledge about the mechanistic aspects of water adsorption and nucleation on zeolites surfaces and the concomitant role of zeolite defects, cations and extra framework species. Examples of experimental and computational studies of water interaction with zeolites of varying Si/Al ratios, topologies, and level of silanol defects are reviewed and analyzed. The different steps associated with the process of steaming, including the Al-O-Si bond hydrolysis and subsequent structural modifications, such as dealumination, mesopore formation, and amorphization, are evaluated in light of recent DFT calculations, as well as SS NMR and other spectroscopic studies. Differences between the mechanisms of water attack of the zeolite in vapor or liquid phase are highlighted and explained, as well as the effect of hydrophobic/hydrophilic properties of the zeolite walls. In parallel, the various roles of water as modifier of reactivity are reviewed and discussed, both for plain zeolites as well as rare-earth or phosphorous-modified materials.more » « less
-
more » « less
Abstract Copper‐exchanged zeolites are useful for stepwise conversion of methane to methanol at moderate temperatures. This process also generates some over‐oxidation products like CO and CO2. However, mechanistic pathways for methane over‐oxidation by copper‐oxo active sites in these zeolites have not been previously described. Adequate understanding of methane over‐oxidation is useful for developing systems with higher methanol yields and selectivities. Here, we use density functional theory (DFT) to examine methane over‐oxidation by [Cu3O3]2+active sites in zeolite mordenite MOR. The methyl group formed after activation of a methane C−H bond can be stabilized at a μ‐oxo atom of the active site. This μ‐(O−CH3) intermediate can undergo sequential hydrogen atom abstractions till eventual formation of a copper‐monocarbonyl species. Adsorbed formaldehyde, water and formates are also formed during this process. The overall mechanistic path is exothermic, and all intermediate steps are facile at 200 °C. Release of CO from the copper‐monocarbonyl costs only 3.4 kcal/mol. Thus, for high methanol selectivities, the methyl group from the first hydrogen atom abstraction step
must be stabilizedaway from copper‐oxo active sites. Indeed, it must be quickly trapped at an unreactive site (short diffusion lengths) while avoiding copper‐oxo species (large paths between active sites). This stabilization of the methyl group away from the active sites is central to the high methanol selectivities obtained with stepwise methane‐to‐methanol conversion.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/d1sc05866e
