Achieving reversible and tunable assembly of silica nanoparticles at liquid–liquid interfaces is vital for a wide range of scientific and technological applications including sustainable subsurface energy applications, catalysis, drug delivery and material synthesis. In this study, we report the mechanisms controlling the assembly of silica nanoparticles (dia. 50 nm and 100 nm) at water–heptane and water–toluene interfaces using sodium dodecyl sulfate (SDS) surfactant with concentrations ranging from 0.001–0.1 wt% using operando ultrasmall/small-angle X-ray scattering, cryogenic scanning electron microscopy imaging and classical molecular dynamics simulations. The results show that the assembly of silica nanoparticles at water–hydrocarbon interfaces can be tuned by controlling the concentrations of SDS. Silica nanoparticles are found to: (a) dominate the interfaces in the absence of interfacial SDS molecules, (b) coexist with SDS at the interfaces at low surfactant concentration of 0.001 wt% and (c) migrate toward the aqueous phase at a high SDS concentration of 0.1 wt%. Energetic analyses suggest that the van der Waals and electrostatic interactions between silica nanoparticles and SDS surfactants increase with SDS concentration. However, the favorable van der Waals and electrostatic interactions between the silica nanoparticles and toluene or heptane decrease with increasing SDS concentration. As a result, the silica nanoparticles migrate away from the water–hydrocarbon interface and towards bulk water at higher SDS concentrations. These calibrated investigations reveal the mechanistic basis for tuning silica nanoparticle assembly at complex interfaces.
more »
« less
Label-free characterization of organic nanocarriers reveals persistent single molecule cores for hydrocarbon sequestration
Abstract Self-assembled molecular nanostructures embody an enormous potential for new technologies, therapeutics, and understanding of molecular biofunctions. Their structure and function are dependent on local environments, necessitating in-situ/operando investigations for the biggest leaps in discovery and design. However, the most advanced of such investigations involve laborious labeling methods that can disrupt behavior or are not fast enough to capture stimuli-responsive phenomena. We utilize X-rays resonant with molecular bonds to demonstrate an in-situ nanoprobe that eliminates the need for labels and enables data collection times within seconds. Our analytical spectral model quantifies the structure, molecular composition, and dynamics of a copolymer micelle drug delivery platform using resonant soft X-rays. We additionally apply this technique to a hydrocarbon sequestrating polysoap micelle and discover that the critical organic-capturing domain does not coalesce upon aggregation but retains distinct single-molecule cores. This characteristic promotes its efficiency of hydrocarbon sequestration for applications like oil spill remediation and drug delivery. Such a technique enables operando, chemically sensitive investigations of any aqueous molecular nanostructure, label-free.
more »
« less
- Award ID(s):
- 1626566
- PAR ID:
- 10357214
- Date Published:
- Journal Name:
- Nature Communications
- Volume:
- 12
- Issue:
- 1
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Electroactive polymer thin films undergo repeated reversible structural change during operation in electrochemical applications. While synchrotron X‐ray scattering is powerful for the characterization of stand‐alone and ex situ organic thin films, in situ/operando structural characterization has been underutilized—in large part due to complications arising from supporting electrolyte scattering. This has greatly hampered the development of application relevant structure property relationships. Therefore, a new methodology for in situ/operando X‐ray characterization that separates the incident and scattered X‐ray beam path from the electrolyte is developed. As a proof of concept, the operando structural characterization of weakly‐scattering, organic mixed conducting thin films in an aqueous electrolyte environment is demonstrated, accessing previously unexplored changes in the π‐π peak and diffuse scatter, while capturing the solvent swollen thin film structure which is inaccessible in previous ex situ studies. These in situ/operando measurements improve the sensitivity to structural changes, capturing minute changes not possible ex situ, and have multimodal potential such as combined Raman measurements that also serve to validate the true in situ/operando conditions of the cell. Finally, new directions enabled by this in situ/operando cell design are examined and state of the art measurements are compared.more » « less
-
Abstract Silica nanoparticles (SiNPs) are promising drug delivery nanocarriers due to their tunable size, porous structure, and surface properties. This study compares two synthesis methods: (i) a low‐temperature aqueous sol–gel process yielding SiNPs of 500–700 nm, and (ii) a water‐in‐oil (W/O) microemulsion using either CTAB or TX‐100 surfactants. Surfactant selection significantly affected nanoparticle size, stability, and dispersity. Characterization by dynamic light scattering (DLS), scanning electron microscopy (SEM), X‐ray diffraction (XRD), Brunauer–Emmett–Teller (BET), solid‐state nuclear magnetic resonance spectroscopy (ssNMR), X‐ray photoelectron spectroscopy (XPS), and photoluminescence analysis (PL) confirmed successful synthesis. The TX‐100‐mediated microemulsion method proved particularly effective in achieving highly stable, reproducible, and monodisperse SiNPs, with a size limit of approximately 100 nm, making them ideal candidates for drug encapsulation. Procaine (PRC) incorporation demonstrated the role of reverse micelle dynamics and surfactant‐stabilized interfaces in enhancing encapsulation efficiency. This work highlights the critical role of surfactant and medium selection in SiNPs synthesis, demonstrating their impact on nanoparticle stability, dispersity, and drug loading efficiency. The TX‐100‐mediated microemulsion technique emerges as a superior approach for producing stable, monodisperse SiNPs, advancing the design of nanocarriers for PRC drug delivery applications.more » « less
-
Not AvSelf-assembled polymeric micelles formed from amphiphilic block copolymers offer a promising strategy for enhanced drug delivery due to their biocompatibility and controlled release. However, challenges such as their poor colloidal stability under diluted conditions and degradation during storage and circulation limit their further applications. To address these issues, we developed a straightforward method for constructing cross-linked polycarbonate micelles that enhance stability while allowing for controlled stimuli-responsive drug delivery. By utilizing disulfide-based cross-linking and covalent conjugation of the anticancer drug, our approach maintains micelle integrity and extremely high drug loading over extended periods as well as the superior control of triggered drug release compared to non-cross-linked versions, demonstrating enhanced stability in complex biological environments and improved anticancer efficacy, presenting a novel platform for stable polymer–drug conjugate nanocarriers, holding significant therapeutic potential for targeted cancer treatment.more » « less
-
Abstract Nanostructured materials with high surface area and low coordinated atoms present distinct intrinsic properties from their bulk counterparts. However, nanomaterials’ nucleation/growth mechanism during the synthesis process and the changes of the nanomaterials in the working state are still not thoroughly studied. As two indispensable methods, X‐ray absorption spectroscopy (XAS) provides nanomaterials’ electronic structure and coordination environment, while small‐angle X‐ray scattering (SAXS) offers structural properties and morphology information. A combination of in situ/operando XAS and SAXS provides high temporal and spatial resolution to monitor the evolution of nanomaterials. This review gives a brief introduction to in situ/operando SAXS/XAS cells. In addition, the application of in situ/operando XAS and SAXS in preparing nanomaterials and studying changes of working nanomaterials are summarized.more » « less
An official website of the United States government

