An accurate description of the evolution of dislocation networks is an essential part of discrete and continuum dislocation dynamics models. These networks evolve by motion of the dislocation lines and by forming junctions between these lines via cross slip, annihilation and junction reactions. In this work, we introduce these dislocation reactions into continuum dislocation models using the theory of de Rham currents. We introduce dislocations on each slip system as potentially open lines whose boundaries are associated with junction points and, therefore, still create a network of collectively closed lines that satisfy the classical relations and for the dislocation density tensor and the plastic distortion . To ensure this, we leverage Frank’s second rule at the junction nodes and the concept of virtual dislocation segments. We introduce the junction point density as a new state variable that represents the distribution of junction points within the crystal containing the dislocation network. Adding this information requires knowledge of the global structure of the dislocation network, which we obtain from its representation as a graph. We derive transport relations for the dislocation line density on each slip system in the crystal, which now includes a term that corresponds to the motion of junction points. We also derive the transport relations for junction points, which include source terms that reflect the topology changes of the dislocation network due to junction formation.
more »
« less
Situating the Vector Density Approach Among Contemporary Continuum Theories of Dislocation Dynamics
For the past century, dislocations have been understood to be the carriers of plastic deformation in crystalline solids. However, their collective behavior is still poorly understood. Progress in understanding the collective behavior of dislocations has primarily come in one of two modes: the simulation of systems of interacting discrete dislocations and the treatment of density measures of varying complexity that are considered as continuum fields. A summary of contemporary models of continuum dislocation dynamics is presented. These include, in order of complexity, the two-dimensional statistical theory of dislocations, the field dislocation mechanics treating the total Kröner–Nye tensor, vector density approaches that treat geometrically necessary dislocations on each slip system of a crystal, and high-order theories that examine the effect of dislocation curvature and distribution over orientation. Each of theories contain common themes, including statistical closure of the kinetic dislocation transport equations and treatment of dislocation reactions such as junction formation. An emphasis is placed on how these common themes rely on closure relations obtained by analysis of discrete dislocation dynamics experiments. The outlook of these various continuum theories of dislocation motion is then discussed.
more »
« less
- Award ID(s):
- 1663311
- NSF-PAR ID:
- 10358810
- Date Published:
- Journal Name:
- Journal of engineering materials and technology
- Volume:
- 144
- ISSN:
- 1528-8889
- Page Range / eLocation ID:
- 1-10
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Recent developments in generalized continuum modeling methods ranging from coarse-grained atomistics to micromorphic theory offer potential to make more intimate physical contact with dislocation field problems framed at length scales on the order of microns. We explore a range of discrete dynamical and continuum mechanics approaches to crystal plasticity that are relevant to modeling behavior of populations of dislocations. Predictive atomistic and coarse-grained atomistic models are limited in terms of length and time scales that can be accessed; examples of the latter are discussed in terms of interactions of multiple dislocations in heterogeneous systems. Generalized continuum models alleviate restrictions to a significant extent in modeling larger scales of dislocation configurations and reactions, and are useful to consider effects of dislocation configuration on strength at characteristic length scales of sub-micron and above; these models require a combination of bottomup models and top-down experimental information to inform parameters and model form. The concurrent atomistic-continuum (CAC) method is extended to model complex multicomponent alloy systems using an average atom approach. Examples of CAC are presented, along with potential to assist in informing parameters of a recently developed micropolar crystal plasticity model based on a set of sub-micron dislocation field problems. Prospects for further developments are discussed.more » « less
-
The dynamic interaction between phonons and dislocations in LiF has been studied using molecular dynamics simulations. The simulations have captured the strong dynamic interactions between low-frequency slow transverse acoustic phonons and dislocations that were observed in experiments. Simulation results reveal that the strong dynamic interaction is attributed to resonant interactions between dislocations and slow transverse acoustic phonons. Each dislocation segment is found to possess a set of resonant modes characterized by large-amplitude out-of-phase vibrations of atoms on both sides of the dislocation slip plane. The resonant frequencies associated with these modes exhibit a nearly linear distribution with respect to the mode order. Contrary to previous beliefs, the resonant frequencies of dislocations exhibit only a weak correlation with the dislocation length. Additionally, each dislocation exhibits a dominant resonant mode that corresponds to the strongest vibration mode in response to phonons. This dominant resonant mode is not always the first resonant mode with the lowest frequency. Its specific order depends on the dislocation length. Simulation results have also demonstrated that the resonant modes of dislocations can be influenced by the interactions from neighboring dislocations.more » « less
-
null (Ed.)Continuum dislocation dynamics models of mesoscale plasticity consist of dislocation transport-reaction equations coupled with crystal mechanics equations. The coupling between these two sets of equations is such that dislocation transport gives rise to the evolution of plastic distortion (strain), while the evolution of the latter fixes the stress from which the dislocation velocity field is found via a mobility law. Earlier solutions of these equations employed a staggered solution scheme for the two sets of equations in which the plastic distortion was updated via time integration of its rate, as found from Orowan’s law. In this work, we show that such a direct time integration scheme can suffer from accumulation of numerical errors. We introduce an alternative scheme based on field dislocation mechanics that ensures consistency between the plastic distortion and the dislocation content in the crystal. The new scheme is based on calculating the compatible and incompatible parts of the plastic distortion separately, and the incompatible part is calculated from the current dislocation density field. Stress field and dislocation transport calculations were implemented within a finite element based discretization of the governing equations, with the crystal mechanics part solved by a conventional Galerkin method and the dislocation transport equations by the least squares method. A simple test is first performed to show the accuracy of the two schemes for updating the plastic distortion, which shows that the solution method based on field dislocation mechanics is more accurate. This method then was used to simulate an austenitic steel crystal under uniaxial loading and multiple slip conditions. By considering dislocation interactions caused by junctions, a hardening rate similar to discrete dislocation dynamics simulation results was obtained. The simulations show that dislocations exhibit some self-organized structures as the strain is increased.more » « less
-
Plasticity in body centered cubic (BCC) crystals is shown to be controlled by slow screw dislocation motion, owing to the thermally-activated process of kink pair nucleation and migration. Through three dimensional discrete dislocation dynamics simulations, this work unravels the mystery of how such slow screw dislocation behavior contributes to extremely rapid strain bursts in submicron BCC tungsten (W) pillars, which is typical of BCC metals. It is found that strain bursts are dominated by the motion of non-screw dislocations at low strain rate, but are more influenced by screw dislocations at high strain rate. The total, and partial strain burst magnitude due to screw dislocations alone, are found to exhibit rate dependence following a power law statistics with exponent of 0.65. Similar power law statistics are also obeyed for the standard deviation of the corresponding plastic strain rate. The role of screw dislocations is attributed to the changing nature of dislocation source operation at different strain rates. The corresponding spatial distribution of plastic deformation is also discussed based on the uniqueness of the simulation method in reproducing the distribution of slipped area and plastic strain with very high spatial resolution.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/doi.org/10.1115/1.4052066
