An official website of the United States government
Abstract Phased arrays have been a cornerstone of non-destructive evaluation, sonar communications, and medical imaging for years. Conventional arrays work by imparting a static phase gradient across a set of transducers to steer a self-created wavefront in a desired direction. Most recently, space-time-periodic (STP) phased arrays have been explored in the context of multi-harmonic wave beaming. Owing to the STP phase profile, multiple scattered harmonics of a single-frequency input are generated which propagate simultaneously in different directional lanes. Each of these lanes is characterized by a principal angle and a distinct frequency signature that can be computationally predicted. However, owing to the Hermitian (real) nature of the spatiotemporal phase gradient, waves emergent from the array are still bound to propagate simultaneously along up- and down-converted directions with a perfectly symmetric energy distribution. Seeking to push this boundary, this paper presents a class of non-Hermitian STP phased arrays which exercise a degree of unprecedented control over the transmitted waves through an interplay between gain, loss, and coupling between its individual components. A complex phase profile under two special symmetries, parity-time (PT) and anti-PT, is introduced that enables the modulation of the amplitude of various harmonics and decouples up- and down-converted harmonics of the same order. We show that these arrays provide on-demand suppression of either up- or down-converted harmonics at an exceptional point—a degeneracy in the parameter space where the system’s eigenvalues and eigenvectors coalesce. An experimental prototype of the non-Hermitian array is constructed to illustrate the selective directional suppression via time-transient measurements of the out-of-plane displacements of an elastic substrate via laser vibrometry. The theory of non-Hermitian phased arrays and their experimental realization unlock rich opportunities in precise elastoacoustic wave manipulation that can be tailored for a diverse range of engineering applications.
more »
« less
Frequency selective wave beaming in nonreciprocal acoustic phased arrays
Abstract Acoustic phased arrays are capable of steering and focusing a beam of sound via selective coordination of the spatial distribution of phase angles between multiple sound emitters. Constrained by the principle of reciprocity, conventional phased arrays exhibit identical transmission and reception patterns which limit the scope of their operation. This work presents a controllable space–time acoustic phased array which breaks time-reversal symmetry, and enables phononic transition in both momentum and energy spaces. By leveraging a dynamic phase modulation, the proposed linear phased array is no longer bound by the acoustic reciprocity, and supports asymmetric transmission and reception patterns that can be tuned independently at multiple channels. A foundational framework is developed to characterize and interpret the emergent nonreciprocal phenomena and is later validated against benchmark numerical experiments. The new phased array selectively alters the directional and frequency content of the incident signal and imparts a frequency conversion between different wave fields, which is further analyzed as a function of the imposed modulation. The space–time acoustic phased array enables unprecedented control over sound waves in a variety of applications ranging from ultrasonic imaging to non-destructive testing and underwater SONAR telecommunication.
more »
« less
- PAR ID:
- 10360740
- Publisher / Repository:
- Nature Publishing Group
- Date Published:
- Journal Name:
- Scientific Reports
- Volume:
- 10
- Issue:
- 1
- ISSN:
- 2045-2322
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Recent advancement in digital coding metasurfaces incorporating spatial and temporal modulation has enabled simultaneous control of electromagnetic (EM) waves in both space and frequency domains by manipulating incident EM waves in a transmissive or reflective fashion, resulting in time-reversal asymmetry. Here we show in theory and experiment that a digitally space-time-coded metamaterial (MTM) antenna with spatiotemporal modulation at its unit cell level can be regarded as a radiating counterpart of such digital metasurface, which will enable nonreciprocal EM wave transmission and reception via surface-to-leaky-wave transformation and harmonic frequency generation. Operating in the fast wave (radiation) region, the space-time-coded MTM antenna is tailored in a way such that the propagation constant of each programmable unit cell embedded with varactor diodes can toggle between positive and negative phases, which is done through providing digital sequences by using a field-programmable gate array (FPGA). Owing to the time-varying coding sequence, harmonic frequencies are generated with different main beam directions. Furthermore, the space time modulation of the digitally coded MTM antenna allows for nonreciprocal transmission and reception of EM waves by breaking the time-reversal symmetry, which may enable many applications, such as simultaneous transmitting and receiving, unidirectional transmission, radar sensing, and multiple-input and multiple-output (MIMO) beamformer.more » « less
-
Acoustic reciprocity, which is widely observed in linear time-invariant systems, refers to the property that wave transmission pattern remains the same when the source and receiver are switched. Non-reciprocity, on the other hand, violates this symmetry and can be used to control wave propagation and manufacture desired propagation patterns. To break reciprocity, multiple approaches (active and passive) have been studied recently. While active manner often relies on odd-symmetry field or time-variant parameters, passive manner achieves non-reciprocity by combining geometric asymmetry and nonlinearity in the structure. In this field, researchers have studied a number of acoustic devices that allow one-way propagation1, 2. However, these devices either change the frequency content of the sending signal, or have a strict restriction on the range of sending frequency. In this paper, we propose a passive, nonlinear, periodic structure, which achieves giant non-reciprocity for a range of input frequency and energy with minimal distortion of the sending frequency.more » « less
-
Abstract Acoustic holograms have promising applications in sound‐field reconstruction, particle manipulation, ultrasonic haptics, and therapy. This study reports on the theoretical, numerical, and experimental investigation of multiplexed acoustic holograms at both audio and ultrasonic frequencies via a rationally designed transmission‐type acoustic metamaterial. The proposed metahologram is composed of two Fabry–Pérot resonant channels per unit cell, which enables the simultaneous modulation of the transmitted amplitude and phase at two desired frequencies. In contrast to conventional acoustic metamaterial‐based holograms, the design strategy proposed here provides a new degree of freedom (frequency) that can actively tailor holograms that are otherwise completely passive and significantly enhances the information encoded in acoustic metamaterials. To demonstrate the multiplexed acoustic metamaterial, the projection of two different high‐quality metaholograms is first shown at 14 and 17 kHz, with the patterns of the letters N and S. Then, two‐channel ultrasound focusing and annular beams generation for the incident ultrasonic frequencies of 35 and 42.5 kHz are demonstrated. These multiplexed acoustic metaholograms offer a technical advance to tackle the rising challenges in the fields of acoustic metamaterials, architectural acoustics, and medical ultrasound.more » « less
-
Modern mmWave systems have limited scalability due to inflexibility in performing frequency multiplexing. All the frequency components in the signal are beamformed to one direction via pencil beams and cannot be streamed to other user directions. We present a new flexible mmWave system called mmFlexible, which enables flexible directional frequency multiplexing. In this system, different frequency components of the mmWave signal are beamformed in multiple arbitrary directions with the same pencil beam. Our system makes two key contributions: (1) We propose a novel mmWave front-end architecture, called a delay-phased array, that utilizes a variable delay and variable phase element to create the desired frequency-direction response. (2) We propose a novel algorithm called FSDA (Frequency-space to delay-antenna) to estimate delay and phase values for the real-time operation of the delay-phased array. Through evaluations using mmWave channel traces, we demonstrate that mmFlexible achieves a 60-150% reduction in worst-case latency compared to the baselines.more » « less
