skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Estimating Heat‐Related Exposures and Urban Heat Island Impacts: A Case Study for the 2012 Chicago Heatwave
Abstract Accelerated urbanization increases both the frequency and intensity of heatwaves (HW) and urban heat islands (UHIs). An extreme HW event occurred in 2012 summer that caused temperatures of more than 40°C in Chicago, Illinois, USA, which is a highly urbanized city impacted by UHIs. In this study, multiple numerical models, including the High Resolution Land Data Assimilation System (HRLDAS) and Weather Research and Forecasting (WRF) model, were used to simulate the HW and UHI, and their performance was evaluated. In addition, sensitivity testing of three different WRF configurations was done to determine the impact of increasing model complexity in simulating urban meteorology. Model performances were evaluated based on the statistical performance metrics, the application of a multi‐layer urban canopy model (MLUCM) helps WRF to provide the best performance in this study. HW caused rural temperatures to increase by ∼4°C, whereas urban Chicago had lower magnitude increases from the HW (∼2–3°C increases). Nighttime UHI intensity (UHII) ranged from 1.44 to 2.83°C during the study period. Spatiotemporal temperature fields were used to estimate the potential heat‐related exposure and to quantify the Excessive Heat Factor (EHF). The EHF during the HW episode provides a risk map indicating that while urban Chicago had higher heat‐related stress during this event, the rural area also had high risk, especially during nighttime in central Illinois. This study provides a reliable method to estimate spatiotemporal exposures for future studies of heat‐related health impacts.  more » « less
Award ID(s):
2048423
PAR ID:
10362134
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  
Publisher / Repository:
DOI PREFIX: 10.1029
Date Published:
Journal Name:
GeoHealth
Volume:
6
Issue:
1
ISSN:
2471-1403
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Journal of Applied Meteorology and Climatology)
    null (Ed.)
    Abstract In this study, we simulate the magnitude of urban heat islands (UHIs) during heat wave (HWs) in two cities with contrasting climates (Boston, Massachusetts, and Phoenix, Arizona) using the Weather Research and Forecasting (WRF) Model and quantify their drivers with a newly developed attribution method. During the daytime, a surface UHI (SUHI) is found in Boston, which is mainly caused by the higher urban surface resistance that reduces the latent heat flux and the higher urban aerodynamic resistance r a that inhibits convective heat transfer between the urban surface and the lower atmosphere. In contrast, a daytime surface urban cool island is found in Phoenix, which is mainly due to the lower urban r a that facilitates convective heat transfer. In terms of near-surface air UHI (AUHI), there is almost no daytime AUHI in either city. At night, an SUHI and an AUHI are identified in Boston that are due to the stronger release of heat storage in urban areas. In comparison, the lower urban r a in Phoenix enhances convective heat transfer from the atmosphere to the urban surface at night, leading to a positive SUHI but no AUHI. Our study highlights that the magnitude of UHIs or urban cool islands is strongly controlled by urban–rural differences in terms of aerodynamic features, vegetation and moisture conditions, and heat storage, which show contrasting characteristics in different regions. 
    more » « less
  2. ; ; ; ; (, Urban Informatics)
    Abstract Due to climate change and rapid urbanization, Urban Heat Island (UHI), featuring significantly higher temperature in metropolitan areas than surrounding areas, has caused negative impacts on urban communities. Temporal granularity is often limited in UHI studies based on satellite remote sensing data that typically has multi-day frequency coverage of a particular urban area. This low temporal frequency has restricted the development of models for predicting UHI. To resolve this limitation, this study has developed a cyber-based geographic information science and systems (cyberGIS) framework encompassing multiple machine learning models for predicting UHI with high-frequency urban sensor network data combined with remote sensing data focused on Chicago, Illinois, from 2018 to 2020. Enabled by rapid advances in urban sensor network technologies and high-performance computing, this framework is designed to predict UHI in Chicago with fine spatiotemporal granularity based on environmental data collected with the Array of Things (AoT) urban sensor network and Landsat-8 remote sensing imagery. Our computational experiments revealed that a random forest regression (RFR) model outperforms other models with the prediction accuracy of 0.45 degree Celsius in 2020 and 0.8 degree Celsius in 2018 and 2019 with mean absolute error as the evaluation metric. Humidity, distance to geographic center, and PM2.5concentration are identified as important factors contributing to the model performance. Furthermore, we estimate UHI in Chicago with 10-min temporal frequency and 1-km spatial resolution on the hottest day in 2018. It is demonstrated that the RFR model can accurately predict UHI at fine spatiotemporal scales with high-frequency urban sensor network data integrated with satellite remote sensing data. 
    more » « less
  3. ; ; ; ; (, Journal of Applied Meteorology and Climatology)
    null (Ed.)
    Abstract Urban heat islands (UHIs) are caused by a multitude of changes induced by urbanization. However, the relative importance of biophysical and atmospheric factors in controlling the UHI intensity remains elusive. In this study, we quantify the magnitude of surface UHIs (SUHIs), or surface urban cool islands (SUCIs), and elucidate their biophysical and atmospheric drivers on the basis of observational data collected from one urban site and two rural grassland sites in and near the city of Nanjing, China. Results show that during the daytime a strong SUCI effect is observed when the short grassland site is used as the reference site whereas a moderate SUHI effect is observed when the tall grassland is used as the reference site. We find that the former is mostly caused by the lower aerodynamic resistance for convective heat transfer at the urban site and the latter is primarily caused by the higher surface resistance for evapotranspiration at the urban site. At night, SUHIs are observed when either the short or the tall grassland site is used as the reference site and are predominantly caused by the stronger release of heat storage at the urban site. In general, the magnitude of SUHI is much weaker, and even becomes SUCI during daytime, with the short grassland site being the reference site because of its larger aerodynamic resistance. The study highlights that the magnitude of SUHIs and SUCIs is mostly controlled by urban–rural differences of biophysical factors, with urban–rural differences of atmospheric conditions playing a minor role. 
    more » « less
  4. ; ; ; (, Urban Climate)
    While tropical cyclone (TC) and heatwave (HW) compound hazard extremes are rare in the historical record, they have been recently emerging and are expected to become more frequent under future climate projections. Joint TC-HW hazards can exacerbate heat stress felt by residents, particularly in densely populated urban communities or areas suffering from storm-related power outages. The Princeton Urban Canopy Model (PUCM) has been used to evaluate heatwave conditions in urban environments, but has yet to be used to model joint TC-HW conditions. In this study, we model joint TC-HW hazards by adjusting the surface energy and water budgets of the PUCM to account for TC flood and extreme wind hazards. We investigate joint hazard interactions during Hurricane Laura (2020) using the Weather Research and Forecasting model (WRF) to simulate both Laura's wind field to drive subsequent hydrodynamic modeling of inundation and post-storm atmospheric conditions. The WRF and hydrodynamic modeling results are then used to drive the PUCM to assess the interaction of joint flooding, wind, and heat and their impacts on the city of Lake Charles in Louisiana. Results show that accounting for TC inundation up to a week after landfall can cause over 3°C reductions in daytime heat stress and 1.5°C increases in nighttime heat stress compared to simulations that ignore the presence of flooding. Accounting for defoliation from extreme TC winds can increase maximum nighttime heat stress by more than 4°C. 
    more » « less
  5. ; ; ; ; (, Energies)
    Typical Meteorological Year (TMY) datasets, widely used in building energy modeling, overlook Urban Heat Island (UHI) effects and future climate trends by relying on long-term data from rural stations such as airports. This study addresses this limitation by integrating Urban Weather Generator (UWG) simulations with CCWorldWeatherGen projections to produce microclimate-adjusted and future weather scenarios. These datasets were then incorporated into an Urban Building Energy Modeling (UBEM) framework using Urban Modeling Interface (UMI) to evaluate energy performance across a lowincome residential neighborhood in Des Moines, Iowa. Results show that UHI intensity will rise from an annual average of 0.55 °C under current conditions to 0.60 °C by 2050 and 0.63 °C by 2080, with peak intensities in summer. The UHI elevates cooling Energy Use Intensity (EUI) by 7% today, with projections indicating a sharp increase—91% by 2050 and 154% by 2080. The UHI will further amplify cooling demand by 2.3% and 6.2% in 2050 and 2080, respectively. Conversely, heating EUI will decline by 20.0% by 2050 and 40.1% by 2080, with the UHI slightly reducing heating demand. Insulation mitigates cooling loads but becomes less effective for heating demand over time. These findings highlight the need for climate-adaptive policies, building retrofits, and UHI mitigation to manage future cooling demand. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email