Photonic network-on-chip (PNoC) architectures employ photonic links with dense wavelength-division multiplexing (DWDM) to enable high throughput on-chip transfers. Unfortunately, increasing the DWDM degree (i.e., using a larger number of wavelengths) to achieve a higher aggregated data rate in photonic links and, hence, higher throughput in PNoCs, requires sophisticated and costly laser sources along with extra photonic hardware. This extra hardware can introduce undesired noise to the photonic link and increase the bit error rate (BER), power, and area consumption of PNoCs. To mitigate these issues, the use of 4-pulse amplitude modulation (4-PAM) signaling, instead of the conventional on-off keying (OOK) signaling, can halve the wavelength signals utilized in photonic links for achieving the target aggregate data rate while reducing the overhead of crosstalk noise, BER, and photonic hardware. There are various designs of 4-PAM modulators reported in the literature. For example, the signal superposition (SS)–, electrical digital-to-analog converter (EDAC)–, and optical digital-to-analog converter (ODAC)–based designs of 4-PAM modulators have been reported. However, it is yet to be explored how these SS-, EDAC-, and ODAC-based 4-PAM modulators can be utilized to design DWDM-based photonic links and PNoC architectures. In this article, we provide a systematic analysis of the SS, EDAC, and ODAC types of 4-PAM modulators from prior work with regards to their applicability and utilization overheads. We then present a heuristic-based search method to employ these 4-PAM modulators for designing DWDM-based SS, EDAC, and ODAC types of 4-PAM photonic links with two different design goals: (i) to attain the desired BER of 10 -9 at the expense of higher optical power and lower aggregate data rate and (ii) to attain maximum aggregate data rate with the desired BER of 10 -9 at the expense of longer packet transfer latency. We then employ our designed 4-PAM SS–, 4-PAM EDAC–, 4-PAM ODAC–, and conventional OOK modulator–based photonic links to constitute corresponding variants of the well-known CLOS and SWIFT PNoC architectures. We eventually compare our designed SS-, EDAC-, and ODAC-based variants of 4-PAM links and PNoCs with the conventional OOK links and PNoCs in terms of performance and energy efficiency in the presence of inter-channel crosstalk. From our link-level and PNoC-level evaluation, we have observed that the 4-PAM EDAC–based variants of photonic links and PNoCs exhibit better performance and energy efficiency compared with the OOK-, 4-PAM SS–, and 4-PAM ODAC–based links and PNoCs.
more »
« less
Photonic crystal resonators for inverse-designed multi-dimensional optical interconnects
We experimentally demonstrate a 400 Gbit/s optical communication link utilizing wavelength-division multiplexing and mode-division multiplexing for a total of 40 channels. This link utilizes a novel, to the best of our knowledge, 400 GHz frequency comb source based on a chip-scale photonic crystal resonator. Silicon-on-insulator photonic inverse-designed 4 × 4 mode-division multiplexer structures enable a fourfold increase in data capacity. We show less than −10 dBm of optical receiver power for error-free data transmission in 34 out of a total of 40 channels using a PRBS31 pattern.
more » « less- Award ID(s):
- 2052701
- NSF-PAR ID:
- 10368637
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optics Letters
- Volume:
- 47
- Issue:
- 12
- ISSN:
- 0146-9592; OPLEDP
- Page Range / eLocation ID:
- Article No. 3063
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Limited-size receiver (Rx) apertures and transmitter–Rx (Tx–Rx) misalignments could induce power loss and modal crosstalk in a mode-multiplexed free-space link. We experimentally demonstrate the mitigation of these impairments in a 400 Gbit/s four-data-channel free-space optical link. To mitigate the above degradations, our approach of singular-value-decomposition-based (SVD-based) beam orthogonalization includes (1) measuring the transmission matrix
for the link given a limited-size aperture or misalignment; (2) performing SVD on the transmission matrix to find the , , and complex matrices; (3) transmitting each data channel on a beam that is a combination of Laguerre–Gaussian modes with complex weights according to the matrix; and (4) applying the matrix to the channel demultiplexer at the Rx. Compared with the case of transmitting each channel on a beam using a single mode, our experimental results when transmitting multi-mode beams show that (a) with a limited-size aperture, the power loss and crosstalk could be reduced by and , respectively; and (b) with misalignment, the power loss and crosstalk could be reduced by and , respectively. -
more » « less
Abstract The Pancharatnam–Berry phase induced by the winding topology of polarization around a vortex singularity at bound states in the continuum (BIC) provides a unique approach to optical vortex (OV) generation. The BIC-based OV generators have the potential to outperform their counterparts that rely on spatial variations in terms of design feasibility, fabrication complexity, and robustness. However, given the fact that this class of OV generators originates from the topological property of the photonic bands, their responses are generally fixed and cannot be dynamically altered, which limits their applications to photonic systems. Here, we numerically demonstrate that a silicon photonic crystal slab can be used to realize optically switchable OV generation by simultaneously exploiting the vortex topology in momentum space in conjunction with silicon’s nonlinear dynamics. Picosecond switching of OV beams at near-infrared wavelengths are observed. The demonstrated nontrivial topological nature of the active generators can significantly expand the application of BIC toward ultrafast vortex beam generation, high-capacity optical communication, and mode-division multiplexing.
-
García-Blanco, Sonia M. ; Cheben, Pavel (Ed.)The benefits of photonics over electronics in the application of optical transceivers and both classical and quantum computing have been demonstrated over the past decades, especially in the ability to achieve high bandwidth, high interconnectivity, and low latency. Due to the high maturity of silicon photonics foundries, research on photonics devices such as silicon micro ring resonators (MRRs), Mach-Zehnder modulators (MZM), and photonic crystal (PC) resonators has attracted plenty of attention. Among these photonic devices, silicon MRRs using carrier depletion effects in p-n junctions represent optical switches manufacturable in the most compact magnitude at high volume with demonstrated switching energies ~5.2fJ/bit. In matrix multiplication demonstrated with integrated photonics, one approach is to couple one bus straight waveguide to several MRRs with different resonant wavelengths to transport signals in different channels, corresponding to a matrix row or column. However, such architectures are potentially limited to ~30 MRRs in series, by the limited free-spectral range (FSR) of an individual MRR. We show that PC switches with sub-micron optical mode confinements can have a FSR >300nm, which can potentially enable energy efficient computing with larger matrices of ~200 resonators by multiplexing. In this paper, we present designs for an oxide-clad bus-coupled PC switch with 1dB insertion loss, 5dB extinction, and ~260aJ/bit switching energy by careful control of the cavity geometry as well as p-n junction doping. We also demonstrate that air-clad bus-coupled PC switches can operate with 1dB insertion loss, 3dB extinction, and ~80aJ/bit switching energy.more » « less
-
more » « less
Abstract The generation of rapidly tunable optical vortex (OV) beams is one of the most demanding research areas of the present era as they possess orbital angular momentum (OAM) with additional degrees of freedom that can be exploited to enhance signal‐carrying capacity by using mode division multiplexing and information encoding in optical communication. Particularly, rapidly tunable OAM devices at a fixed wavelength in the telecom band stir extensive interest among researchers for both classical and quantum applications. This article demonstrates the realistic design of a Si‐integrated photonic device for rapidly tunable OAM wave generation at a 1550‐nm wavelength by using an ultra‐low‐loss phase change material (PCM) embedded with a Si‐ring resonator with angular gratings. Different OAM modes are achieved by tuning the effective refractive index using rapid electrical switching of Sb2Se3 film from amorphous to crystalline states and vice versa. The generation of OAM waves relies on a traveling wave modulation of the refractive index of the micro‐ring, which breaks the degeneracy of oppositely oriented whispering gallery modes. The proposed device is capable of producing rapidly tunable OV beams, carrying different OAM modes by using electrically controllable switching of ultra‐low‐loss PCM Sb2Se3.
