skip to main content

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Fabrication of silicon-tipped fiber-optic temperature sensors using aerogel-assisted glass soldering with precise laser heating
Title: Fabrication of silicon-tipped fiber-optic temperature sensors using aerogel-assisted glass soldering with precise laser heating

We demonstrate the fabrication of fiber-optic Fabry–Perot interferometer (FPI) temperature sensors by bonding a small silicon diaphragm to the tip of an optical fiber using low melting point glass powders heated by a 980 nm laser on an aerogel substrate. The heating laser is delivered to the silicon FPI using an optical fiber, while the silicon temperature is being monitored using a 1550 nm white-light system, providing localized heating with precise temperature control. The use of an aerogel substrate greatly improves the heating efficiency by reducing the thermal loss of the bonding parts to the ambient environment. A desirable temperature for bonding can be achieved with relatively small heating laser power. The bonding process is carried out in an open space at room temperature for convenient optical alignment. The precise temperature control ensures minimum perturbation to the optical alignment and no induced thermal damage to the optical parts during the bonding process. For demonstration, we fabricated a low-finesse and high-finesse silicon FPI sensor and characterized their measurement resolution and temperature capability. The results show that the fabrication method has a good potential for high-precision fabrication of fiber-optic sensors.

  more » « less
Award ID(s):
1918074
PAR ID:
10368638
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
Optical Society of America
Date Published:
Journal Name:
Optics Letters
Volume:
47
Issue:
11
ISSN:
0146-9592; OPLEDP
Format(s):
Medium: X Size: Article No. 2718
Size(s):
Article No. 2718
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ( , Proceedings Volume 12020, Vertical-Cavity Surface-Emitting Lasers XXVI)
    Choquette, Kent D. ; Lei, Chun ; Graham, Luke A. (Ed.)
    A wafer-scale CMOS-compatible process for heterogeneous integration of III-V epitaxial material onto silicon for photonic device fabrication is presented. Transfer of AlGaAs-GaAs Vertical-Cavity Surface-Emitting Laser (VCSEL) epitaxial material onto silicon using a carrier wafer process and metallic bonding is used to form III-V islands which are subsequently processed into VCSELs. The transfer process begins with the bonding of III-V wafer pieces epitaxy-down on a carrier wafer using a temporary bonding material. Following substrate removal, precisely-located islands of material are formed using photolithography and dry etching. These islands are bonded onto a silicon host wafer using a thin-film non-gold metal bonding process and the transfer wafer is removed. Following the bonding of the epitaxial islands onto the silicon wafer, standard processing methods are used to form VCSELs with non-gold contacts. The removal of the GaAs substrate prior to bonding provides an improved thermal pathway which leads to a reduction in wavelength shift with output power under continuous-wave (CW) excitation. Unlike prior work in which fullyfabricated VCSELs are flip-chip bonded to silicon, all photonic device processing takes place after the epitaxial transfer process. The electrical and optical performance of heterogeneously integrated 850nm GaAs VCSELs on silicon is compared to their as-grown counterparts. The demonstrated method creates the potential for the integration of III-V photonic devices with silicon CMOS, including CMOS imaging arrays. Such devices could have use in applications ranging from 3D imaging to LiDAR. 
    more » « less
  2. ; ; ; ( , SPIE)
    Limongelli, Maria Pina ; Ng, Ching Tai ; Glisic, Branko (Ed.)
    Civil engineering structures are routinely exposed to corrosive environments, posing threats to their structural integrity. Traditional corrosion control methods often involve employing physical barriers, such as various coatings, to isolate the steel substrate from surrounding electrolytes. Among these methods, thermal spraying of alloy coatings has emerged as a prominent technique in safeguarding steel matrices against corrosion, particularly in industrial and marine settings. However, the inherent porosity of thermal spraying coatings compromises their corrosion resistance. Incorporating a polymer top layer offers a promising solution by sealing pores and augmenting overall performance. This study investigates corrosion on duplex-coated steel utilizing distributed fiber optic sensors based on optical frequency domain reflectometry. Experimental analyses involve embedding serpentine-arranged distributed fiber optic strain sensors within both thermal spraying layers and epoxy layers. Results demonstrate the efficiency of distributed sensors in identifying corrosion propagation paths by measuring the induced strain changes. Furthermore, the duplex coating exhibits significant enhancements in corrosion resistance for steel structures. 
    more » « less
  3. ; ; ; ( , 16th International Manufacturing Science and Engineering Conference)
    Recent advancements in additive manufacturing such as Direct Write Inkjet printing introduced novel tools that allow controlled and precise deposition of fluid in nano-liter volumes, enabling fabrication of multiscale structures with submillimeter dimensions. Applications include fabrication of flexible electronics, sensors, and assembly of Micro-Electro-Mechanical Systems (MEMS). Critical challenges remain in the control of fluid deposition parameters during Inkjet printing to meet specific dimensional footprints at the microscale necessary for the assembly process of microscale structures. In this paper we characterize an adhesive deposition printing process with a piezo-electric dispenser of nano-liter volumes. Applications include the controlled delivery of high viscosity Ultraviolet (UV) and thermal curable adhesives for the assembly of the MEMS structures. We applied the Taguchi Design of Experiment (DOE) method to determine an optimal set of process parameters required to minimize the size of adhesive printed features on a silicon substrate with good reliability and repeatability of the deposition process. Experimental results demonstrate repeatable deposition of UV adhesive features with 150 μm diameter on the silicon substrate. Based on the observed wettability effect of adhesive printed onto different substrates we propose a solution for further reduction of the deposit-substrate contact area for microassembly optimization. 
    more » « less
  4. ; ; ; ; ; ( , Atmospheric Measurement Techniques)
    Abstract. A novel fiber-optic distributed temperature sensing instrument, the Fiber-optic Laser Operated Atmospheric Temperature Sensor (FLOATS), was developed for continuous in situ profiling of the atmosphere up to 2 km below constant-altitude scientific balloons. The temperature-sensingsystem uses a suspended fiber-optic cable and temperature-dependent scattering of pulsed laser light in the Raman regime to retrieve continuous3 m vertical-resolution profiles at a minimum sampling period of 20 s.FLOATS was designed for operation aboard drifting super-pressure balloons inthe tropical tropopause layer at altitudes around 18 km as part of theStratéole 2 campaign. A short test flight of the system was conductedfrom Laramie, Wyoming, in January 2021 to check the optical, electrical, andmechanical systems at altitude and to validate a four-reference temperaturecalibration procedure with a fiber-optic deployment length of 1170 m. During the 4 h flight aboard a vented balloon, FLOATS retrieved temperatureprofiles during ascent and while at a float altitude of about 19 km. TheFLOATS retrievals provided differences of less than 1.0 ∘Ccompared to a commercial radiosonde aboard the flight payload during ascent.At float altitude, a comparison of optical length and GPS position at thebottom of the fiber-optic revealed little to no curvature in the fiber-opticcable, suggesting that the position of any distributed temperaturemeasurement can be effectively modeled. Comparisons of the distributed temperature retrievals to the reference temperature sensors show strongagreement with root-mean-square-error values less than 0.4 ∘C. Theinstrument also demonstrated good agreement with nearby meteorologicalobservations and COSMIC-2 satellite profiles. Observations of temperatureand wind perturbations compared to the nearby radiosounding profiles provide evidence of inertial gravity wave activity during the test flight. Spectral analysis of the observed temperature perturbations shows that FLOATS is an effective and pioneering tool for the investigation of small-scale gravity waves in the upper troposphere and lower stratosphere. 
    more » « less
  5. ; ; ; ; ( , Advanced Optical Materials)
    Abstract

    Hybrid material systems are a promising approach for extending the capabilities of silicon photonics. Given the weak electro‐optic and thermo‐optic effects in silicon, there is intense interest in integrating an ultrafast‐switching phase‐change material with a large refractive index contrast into the waveguide, such as vanadium dioxide (VO2). It is well established that the phase transition in VO2thin films can be triggered by ultrafast, 800 nm laser pulses, and that pump‐laser fluence is a critical determinant of the recovery time of thin films irradiated by femtosecond pulses. However, thin‐film experiments are not reliable guides to a VO2:Si system for all‐optical, on‐chip switching because of the differences in VO2optical constants in the telecommunication band, and the complex sample geometry and alignment issues in a waveguide geometry. This paper reports the first demonstration that the reversible, ultrafast photoinduced phase transition in VO2can achieve sub‐picosecond response when small VO2volumes are integrated into a silicon waveguide as the active element. The result suggests that VO2can be pursued as a strong candidate for waveguide switching with sub‐picosecond on‐off times.

     
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email