An official website of the United States government
SUMMARY We present our estimations and comparisons of the in situ Vp/Vs ratios and seismicity characteristics for the Parkfield segment of the San Andreas fault in northern California and the San Jacinto Fault Zone and its adjacent regions in southern California. Our results show that the high-resolution in situ Vp/Vs ratios are much more complex than the tomographic Vp/Vs models. They show similar variation patterns to those in the tomographic Vp models, indicating that Vp/Vs ratios are controlled by material properties but are also strongly influenced by fluid contents. In Parkfield, we observe velocity contrasts between the creeping and locked sections. In southern California, we see small-scale anomalous Vp/Vs variation patterns, especially where fault segments intersect, terminate and change orientations. In addition, our investigation confirms that the seismicity in Parkfield is more repeatable than in southern California. However, the earthquakes in the southernmost portion of the San Andreas fault, the trifurcation area of the San Jacinto Fault Zone and the Imperial fault are as much likely falling into clusters as those in Parkfield. The correlation of highly similar events with anomalous in situ Vp/Vs ratios supports the important role of fluids in the occurrence of repeating earthquakes. The high-resolution Vp/Vs ratio estimation method and the corresponding results are helpful for revealing roles of fluids in driving earthquake, fault interaction and stress distribution in fault zones.
more »
« less
Geometrical properties of seismicity in California
SUMMARY The spatial geometry of seismicity encodes information about loading and failure processes, as well as properties of the underlying fault structure. Traditional approaches to characterizing geometrical attributes of seismicity rely on assumed locations and geometry of fault surfaces, particularly at depth, where resolution is overall quite poor. In this study, we develop an alternative approach to quantifying geometrical properties of seismicity using techniques from anisotropic point process theory. Our approach does not require prior knowledge about the underlying fault properties. We characterize the geometrical attributes of 32 distinct seismicity regions in California and introduce a simple four class classification scheme that covers the range of geometrical properties observed. Most of the regions classified as having localized seismicity are within northern California, while nearly all of the regions classified as having distributed seismicity are within southern California. In addition, we find that roughly 1 out of 4 regions exhibit orthogonal seismicity structures. The results of this study provide a foundation for future analyses of geometrical properties of seismicity and new observables to compare with numerical modelling studies.
more »
« less
- PAR ID:
- 10368757
- Publisher / Repository:
- Oxford University Press
- Date Published:
- Journal Name:
- Geophysical Journal International
- Volume:
- 231
- Issue:
- 1
- ISSN:
- 0956-540X
- Page Range / eLocation ID:
- p. 493-504
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract We develop an automated processing procedure to derive a new catalog of earthquake locations, magnitudes, and potencies and analyze 9 years of data between 2008 and 2016 in the San Jacinto fault‐zone region. Our procedure accounts for detailed 3‐D velocity structure using a probabilistic global‐search location inversion and obtains high‐precision relative event locations using differential travel times measured by cross‐correlating waveforms. The obtained catalog illuminates spatiotemporal seismicity patterns in the fault zone with observations for 108,800 earthquakes in the magnitude range −1.8 to 5.4. Inside a focus region consisting of an 80‐km by 50‐km rectangle oriented parallel to the main fault trace, we estimate a 99% detection rate of earthquakes with magnitude 0.6 and greater and detect and locate about 60% more events than those present in the Southern California Seismic Network catalog. The results provide the most complete catalog available for the focused study region during the analyzed period and include both deeper events and very shallow patches of seismicity not present in the regional catalog. The seismicity exhibits a variety of complex patterns that contain important information on deformation processes in the region. The fraction of event pairs with waveforms having cross‐correlation coefficients ≥0.95 is only about 3%, indicating diverse processes operating in the fault zone.more » « less
-
Abstract Seismicity in the Los Angeles metropolitan area has been primarily attributed to the regional stress loading. Below the urban areas, earthquake sequences have occurred over time showing migration off the faults and providing evidence that secondary processes may be involved in their evolution. Combining high-frequency seismic attenuation with other geophysical observations is a powerful tool for understanding which Earth properties distinguish regions with ongoing seismicity. We develop the first high-resolution 3D seismic attenuation models across the region east of downtown Los Angeles using 5,600 three-component seismograms from local earthquakes recorded by a dense seismic array. We present frequency-dependent peak delay and coda-attenuation tomography as proxies for seismic scattering and absorption, respectively. The scattering models show high sensitivity to the seismicity along some of the major faults, such as the Cucamonga fault and the San Jacinto fault zone, while a channel of low scattering in the basement extends from near the San Andreas fault westward. In the vicinity of the Fontana seismic sequence, high absorption, low scattering, and seismicity migration across a fault network suggest fluid-driven processes. Our attenuation and fault network imaging characterize near-fault zones and rock-fluid properties beneath the study area for future improvements in seismic hazard evaluation.more » « less
-
Abstract Plate motions in Southern California have undergone a transition from compressional and extensional regimes to a dominantly strike‐slip regime in the Miocene. Strike‐slip motion is most easily accommodated on vertical faults, and major transform fault strands in the region are typically mapped as near vertical on the surface. However, some previous work suggests that these faults have a dipping geometry at depth. We analyze receiver function arrivals that vary harmonically with back azimuth at all available broadband stations in the region. The results show a dominant signal from contrasts in dipping foliation as well as dipping isotropic velocity contrasts from all crustal depths, including from the ductile middle to lower crust. We interpret these receiver function observations as a dipping fault‐parallel structural fabric that is pervasive throughout the region. The strike of these structures and fabrics is parallel to that of nearby fault surface traces. We also plot microseismicity on depth profiles perpendicular to major strike‐slip faults and find consistently NE dipping features in seismicity changing from near vertical (80–85°) on the Elsinore Fault in the Peninsular Ranges to 60–65° slightly further inland on the San Jacinto Fault to 50–55° on the San Andreas Fault. Taken together, the dipping features in seismicity and in rock fabric suggest that preexisting fabrics and faults may have acted as strain guides in the modern slip regime, with reactivation and growth of strike‐slip faults along northeast dipping fabrics both above and below the brittle‐ductile transition.more » « less
-
Abstract Deformation in transform systems is accommodated by discrete fault slip and distributed off‐fault deformation. Here, we consider how a change in slip behavior along a fault can influence the distribution between on‐ and off‐fault deformation. We use a physical experiment to simplify the geometry, material properties, boundary conditions, and slip history along a strike‐slip fault to directly observe patterns of off‐fault deformation. We document deformation of a silicone slab on a simple shear apparatus using particle image velocimetry (2D) and photogrammetry (3D). The experimental results show regions of topographic highs and lows on either side of the slip transition that grow, evolve, and are displaced with progressive strain. The experimental dilatation field shares similarities with strain fields in central California along the San Andreas fault, which suggests that a change in slip behavior may explain some of the real‐world patterns in short‐ and long‐term deformation.more » « less
