Charge transport in conjugated polymers may be governed not only by the static microstructure but also fluctuations of backbone segments. Using molecular dynamics simulations, we predict the role of side chains in the backbone dynamics for regiorandom poly(3‐alkylthiophene‐2,5‐diyl)s (P3ATs). We show that the backbone of poly(3‐dodecylthiophene‐2‐5‐diyl) (P3DDT) moves faster than that of poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) as a result of the faster motion of the longer side chains. To verify our predictions, we investigated the structures and dynamics of regiorandom P3ATs with neutron scattering and solid state NMR. Measurements of spin‐lattice relaxations (T1) using NMR support our prediction of faster motion for side chain atoms that are farther away from the backbone. Using small‐angle neutron scattering (SANS), we confirmed that regiorandom P3ATs are amorphous at about 300 K, although microphase separation between the side chains and backbones is apparent. Furthermore, quasi‐elastic neutron scattering (QENS) reveals that thiophene backbone motion is enhanced as the side chain length increases from hexyl to dodecyl. The faster motion of longer side chains leads to faster backbone dynamics, which in turn may affect charge transport for conjugated polymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys.
Tuning structures of solution‐state aggregation and aggregation‐mediated assembly pathways of conjugated polymers is crucial for optimizing their solid‐state morphology and charge‐transport property. However, it remains challenging to unravel and control the exact structures of solution aggregates, let alone to modulate assembly pathways in a controlled fashion. Herein, aggregate structures of an isoindigo–bithiophene‐based polymer (PII‐2T) are modulated by tuning selectivity of the solvent toward the side chain versus the backbone, which leads to three distinct assembly pathways: direct crystallization from side‐chain‐associated amorphous aggregates, chiral liquid crystal (LC)‐mediated assembly from semicrystalline aggregates with side‐chain and backbone stacking, and random agglomeration from backbone‐stacked semicrystalline aggregates. Importantly, it is demonstrated that the amorphous solution aggregates, compared with semicrystalline ones, lead to significantly improved alignment and reduced paracrystalline disorder in the solid state due to direct crystallization during the meniscus‐guided coating process. Alignment quantified by the dichroic ratio is enhanced by up to 14‐fold, and the charge‐carrier mobility increases by a maximum of 20‐fold in films printed from amorphous aggregates compared to those from semicrystalline aggregates. This work shows that by tuning the precise structure of solution aggregates, the assembly pathways and the resulting thin‐film morphology and device properties can be drastically tuned.
more » « less- Award ID(s):
- 1847828
- NSF-PAR ID:
- 10369392
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 34
- Issue:
- 32
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
ABSTRACT 2018 ,56 , 1193–1202 -
null (Ed.)Flexible alkyl side chain in conjugate polymers (CPs) improves the solubility and promotes solution processability, in addition, it affects interchain packing and charge mobilities. Despite the well-known charge mobility and morphology correlation for these semi-crystalline polymers, there is a lack of fundamental understanding of the impact of side chain on their crystallization kinetics. In the present work, isothermal crystallization of five poly(3-alkylthiophene-2,5-diyl) (P3ATs) with different side-chain structures were systematically investigated. To suppress the extremely fast crystallization and trap the sample into amorphous glass, an advanced fast scanning chip calorimetry technique, which is able to quench the sample with few to tens thousands of K/s, was applied. Results show that the crystallization of P3ATs was greatly inhibited after incorporation of branched side chains, as indicated by a dramatic up to six orders of magnitude decrease in the crystallization rate. The suppressed crystallization of P3ATs were correlated with an increased π–π stacking distance due to unfavorable side-chain steric interaction. This work provides a pathway to use side-chain engineering to control the crystallization behavior for CPs, thus to control device performance.more » « less
-
more » « less
Abstract In order to apply polymer semiconductors to stretchable electronics, they need to be easily deformed under strain without being damaged. A small number of conjugated polymers, typically with semicrystalline packing structures, have been reported to exhibit mechanical stretchability. Herein, a method is reported to modify polymer semiconductor packing‐structure using a molecular additive, dioctyl phthalate (DOP), which is found to act as a molecular spacer, to be inserted between the amorphous chain networks and disrupt the crystalline packing. As a result, large‐crystal growth is suppressed while short‐range aggregations of conjugated polymers are promoted, which leads to an improved mechanical stretchability without affecting charge‐carrier transport. Due to the reduced conjugated polymer intermolecular interactions, strain‐induced chain alignment and crystallization are observed. By adding DOP to a well‐known conjugated polymer, poly[2,5‐bis(4‐decyltetradecyl)pyrrolo[3,4‐c]pyrrole‐1,4‐(2
H ,5H )‐dione‐(E)‐1,2‐di(2,2′‐bithiophen‐5‐yl)ethene] (DPPTVT), stretchable transistors are obtained with anisotropic charge‐carrier mobilities under strain, and stable current output under strain up to 100%. -
more » « less
Abstract Controlling polymer chain alignment through processing is a means of tuning the charge transport of solution‐based conjugated polymers. In this work, a processing strategy is proposed in which an external electric field (E‐field) is applied to the coating blade (E‐blade) to align polymer chain during solution‐shearing, a meniscus‐guided coating technique. A theoretical model based on dielectrophoresis quantitatively describes and predicts the alignment process and is used to guide the selection of the optimal conditions of the applied E‐field. Using these conditions, more than twofold increase in chain alignment is observed for E‐bladed thin films of a diketopyrrolopyrrole (DPP) semiconducting polymer without affecting other morphological aspects such as film thickness, film coverage, or fiber‐like aggregation. Organic field effect transistors based on the E‐bladed DPP polymer are fabricated at ambient conditions and over areas of a few cm2. They display a threefold improvement in their mobilities and a strong enhancement in charge transport anisotropy compared to films prepared without E‐field. These results reveal a synergistic alignment effect from both the solution‐shearing process and the applied E‐field, and introduce a novel and general approach to control the morphology and the electrical properties of solution‐coated conjugated polymer thin films.
-
We report the influence of side chain hydrolysis on the evolution of nanoscale structure in thin films fabricated by the reactive layer-by-layer (LbL) assembly of branched poly(ethylenimine) (PEI) and poly(2-vinyl-4,4-dimethylazlactone) (PVDMA). LbL assembly of PEI and PVDMA generally leads to the linear growth of thin, smooth films. However, assembly using PVDMA containing controlled degrees of side chain hydrolysis leads to the growth of thicker films that exhibit substantial nanoscale roughness, porosity, and have resulting physicochemical behaviors (e.g., superhydrophobicity) that are similar to those of some thicker PEI/PVDMA coatings reported in past studies. Our results reveal that the degree of PVDMA partial hydrolysis (or carboxylic acid group content) influences the extent to which complex film features develop, suggesting that ion-pairing interactions between hydrolyzed side chains and amines in PEI promote the evolution of bulk and surface morphology. Additional experiments demonstrate that these features likely arise from polymer/polymer interactions at the surfaces of the films during assembly, and not from the formation and deposition of solution-phase polymer aggregates. When combined, our results suggest that nanoporous structures and rough features observed in past studies likely arise, at least in part, from some degree of adventitious side chain hydrolysis in the PVDMA used for film fabrication. Our results provide useful insight into molecular-level features that govern the growth and structures of these reactive materials, and provide a framework to promote nanoscale morphology reliably and reproducibly. The principles and tools reported here should prove useful for further tuning the porosities and tailoring the physicochemical behaviors of these reactive coatings in ways that are important in applied contexts.more » « less
