An official website of the United States government
Abstract The combination of thinning ice, larger waves, and damage due to diurnal thermal cycling motivate the need to better understand the impact of flexing under the action of oceanic waves on the strength of thermally cracked ice. To that end, new experiments were performed on freshwater, lab‐grown ice and first‐year natural sea ice. Both materials were cracked by thermal shocking and then subsequently cyclically flexed. Initially, the thermal cracks weakened both materials. When the cracked ice of either origin was cyclically flexed under fully reversed loading, its flexural strength, initially reduced by the stress‐concentrating action of the cracks, recovered to the strength of non‐cracked, non‐flexed ice. When the cracked ice was cyclically flexed non‐reversely, its strength recovered only partially. During reversed cyclic flexing, the cracked region experienced alternately compressive and tensile stresses. We suggest compression resulted in contact of opposing crack faces followed by sintering leading to strength recovery. During non‐reversed cyclic flexing, contact and sintering were reduced and ice strength did not fully recover. The tendency for cracks to heal during cyclic flexing may lessen their threat to the structural integrity of an ice cover.
more »
« less
Rapid Healing of Thermal Cracks in Ice
Abstract The structural integrity of the arctic sea ice cover is under threat owing largely to the combination of thinning and larger waves. Another contributor may be thermal cracking. In concentrating stress, thermal cracks may weaken the cover. Of interest, therefore, is the strength of thermally damaged ice. To that end, new experiments were performed on sea ice and on lab‐grown saline and salt‐free ice that had been cracked by thermal shocking. As expected, the cracks weakened the materials in accord with fracture mechanics. However, within tens to hundreds of seconds of shocking, the strength recovered completely, for the ice had healed. Healing is attributed to thermally activated sintering related to surface diffusion, assisted possibly by the formation of a quasi‐liquid layer on crack faces. Whether behavior on the small scale is indicative of behavior on the large scale remains to be determined.
more »
« less
- Award ID(s):
- 1947107
- PAR ID:
- 10372327
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Geophysical Research Letters
- Volume:
- 49
- Issue:
- 17
- ISSN:
- 0094-8276
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The conductive heat flux through the snow and ice is a critical component of the mass and energy budgets in the Arctic sea ice system. We use high horizontal resolution (3–15 cm) measurements of snow topography to explore the impacts of sub-meter-scale snow surface roughness on heat flux as simulated by the Finite Element method. Simulating horizontal heat flux in a variable snow cover modestly increases the total simulated heat flux. With horizontal heat flux, as opposed to simple 1D-vertical heat flux modeling, the simulated heat flux is 10% greater than that for uniform snow with the same mean snow thickness for a 31.5 × 21 m region of sea ice (the largest region we studied). Vertical-only (1D) heat flux simulates just a 6% increase for the same region. However, this is highly dependent on observation resolution. Had we measured the snow cover at 1 m horizontal spacing or greater, simulating horizontal heat flux would not have changed the net heat flux from that simulated with vertical-only heat flux. These findings suggest that measuring and modeling snow roughness at sub-meter horizontal scales may be necessary to accurately represent horizontal heat flux on level Arctic sea ice.more » « less
-
Abstract Marginal ice zones are composed of discrete sea‐ice floes, whose dynamics are not well captured by the continuum representation of sea ice in most climate models. This study makes use of an ocean large eddy simulation (LES) model, coupled to cylindrical sea‐ice floes, to investigate thermal and mechanical interactions between melt‐induced submesoscale features and sea‐ice floes, during summer conditions. We explore the sensitivity of sea‐ice melt rates and upper‐ocean turbulence properties to floe size, ice‐ocean drag, and surface winds. Under low wind conditions, upper ocean turbulence transports warm cyclonic filaments from the open ocean toward the center of the floes and enhances their basal melt. This heat transport is partially suppressed by trapping of ice within cold anticyclonic features. When winds are stronger, melt rates are enhanced by the decoupling of floes from the cold, melt‐induced lens underneath sea ice. Distinct dynamical regimes emerge in which the influence of warm filaments on sea‐ice melt is mitigated by the strength of ice‐ocean coupling and eddy size relative to floe size. Simple scaling laws, which may help parameterize these processes in coarse continuum‐based sea‐ice models, successfully capture floe melt rates under these limiting regimes.more » « less
-
Abstract Variability in sea ice is a critical climate feedback, yet the seasonal behavior of Southern Hemisphere sea ice and climate across multiple timescales remains unclear. Here, we develop a seasonally resolved Holocene sea salt record using major ion measurements of the South Pole Ice Core (SPC14). We combine the SPC14 data with the GEOS‐Chem chemical transport model to demonstrate that the primary sea salt source switches seasonally from open water (summer) to sea ice (winter), with wintertime variations disproportionately responsible for the centennial to millennial scale structure in the record. We interpret increasing SPC14 and circum‐Antarctic Holocene sea salt concentrations, particularly between 8 and 10 ka, as reflecting a period of winter sea ice expansion. Between 5 and 6 ka, an anomalous drop in South Atlantic sector sea salt indicates a temporary sea ice reduction that may be coupled with Northern Hemisphere cooling and associated ocean circulation changes.more » « less
-
Abstract The strength of coastal Arctic Ocean CO2uptake is vulnerable to landscape‐scale changes such as hydrological intensification, changing climate, and alterations to terrestrial and aquatic biogeochemistry. Across a period of 4 yr (2019–2023) and three distinct sampling periods, we visited five coastal ecosystems of the Beaufort Sea with varying barrier island coverage to understand drivers of Arctic coastal CO2flux. The ice cover sampling period was characterized by the highest pCO2saturation and dissolved O2undersaturation. We observed a > 100μatm difference in pCO2over shallow depths (up to 2 m) at 73% of ice‐cover site visits. Notably, the geomorphology of barrier islands and channels controlled the flushing of colder Beaufort Sea waters across the systems and influenced the strength and appearance of both vertical thermohaline and pCO2stratification. The ice breakup period reflected spring freshet and was a net CO2sink during sampling, likely related to freshwater riverine dilution, CaCO3dissolution from sea ice melt, and water column algal activity. During the open water sampling period, the interaction of marine and terrestrial contributions predicted the strength of the CO2efflux, with freshwater inputs introducing higher temperatures and organic material, which increased remineralization. The capacity of these systems to act as CO2sources or sinks varies throughout the year and is largely driven by geomorphic conditions. Any spatially integrative studies of CO2flux or coastal productivity should consider the physical and biogeochemical heterogeneity of Arctic coastal ecosystems.more » « less
